1. はじめに
This manual provides detailed instructions for the safe and efficient operation, setup, maintenance, and troubleshooting of your SUNLU T3 3D Printer. Please read this manual thoroughly before using the printer to ensure optimal performance and longevity.
Image: The SUNLU T3 3D Printer, showcasing そのデザインとample print。
2. 安全に関する注意事項
以下の安全上の注意事項を常に守ってください。
- プリンターを可燃性物質や熱源から遠ざけてください。
- 動作中は適切な換気を確保してください。
- Do not touch the hot nozzle or heated bed during operation or immediately after printing.
- メンテナンスや清掃を行う前に必ず電源を切ってください。
- お子様やペットの手の届かない場所に保管してください。
- 電源電圧を確認するtage switch is set correctly for your region (115V or 230V) before plugging in the device. This switch is typically located near the power input.
3. セットアップと組み立て
3.1 開梱と検査
Carefully remove all components from the packaging. Inspect for any visible damage during transit. Refer to the packing list to ensure all parts are present.
Image: A visual representation of the SUNLU T3 3D Printer's packing list, including the main unit, accessories, and tools.
3.2組み立て手順
The SUNLU T3 3D Printer is designed for easy assembly, typically completed in three main steps:
- Attach the gantry to the base.
- Mount the power supply unit/control box.
- フィラメントスプールホルダーを取り付けます。
すべての接続が安全であり、ケーブルが適切に配線されていることを確認します。
画像: 爆発した view illustrating the simple three-step assembly of the printer.
3.3 初期レベル調整
The T3 printer features 16-point automatic leveling. This function assists in achieving an even print surface. It is recommended to perform auto-leveling before your first print and periodically thereafter.
Image: The 16-point auto-leveling system in action, ensuring a precise print surface.
4. 操作手順
4.1フィラメントのロード
Insert the filament into the extruder mechanism. The T3 features a double gear metal extruder for stable filament output. Ensure the filament feeds smoothly without kinks.
Image: The metal double gear extruder, designed for consistent filament feeding.
4.2 印刷プロセス
3D モデルをロードします file onto the printer via the provided TF card. Select the desired file from the printer's interface. The T3 supports high-speed printing up to 250mm/s, significantly reducing print times.
Image: A visual comparison demonstrating the speed advantage of 250mm/s printing.
4.3 スマート機能
- Filament Clog Detection: The printer will suspend operation and return to the origin if a clog is detected. Users can then clear the clog and resume printing.
- フィラメント断線検出: The T3 detects abnormal filament feeding, such as run-out or breakage, and pauses printing to prevent print failure.
- 電源オフで印刷を再開: 停電の場合tage, the printer's memory function allows it to resume printing from where it left off once power is restored.
- Magnetic Build Plate: The flexible magnetic build surface allows for easy removal of finished 3D models without deformation. It also features ultra-fast heating.
Image: Flowchart demonstrating how the printer detects and handles filament clogs.
Image: Visual explanation of the power-off resume and filament outage detection features.
Image: Layers of the magnetic build plate, highlighting its flexibility and adhesion properties.
5. メンテナンス
5.1 ベルト張力調整
Over time, belts may loosen, affecting print accuracy and potentially causing noise. The T3 features X-axis and Y-axis belt adjusters to maintain proper tension and printing accuracy.
Image: Instructions for adjusting the X-axis and Y-axis belts to ensure optimal tension.
5.2一般的なクリーニング
Regularly clean the print bed, nozzle, and other accessible parts to prevent debris buildup. Use appropriate tools and cleaning solutions as recommended by the manufacturer.
5.3 Hot End Maintenance
Periodically inspect the hot end assembly. Ensure all components are securely fastened and free from filament residue. If necessary, carefully disassemble and reassemble the hot end, ensuring proper seating of all parts.
6。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| No power upon startup | 間違ったボリュームtage switch setting, loose power connections, internal wiring issue. | 電源電圧を確認するtage switch (115V/230V) is correctly set. Check all power cable connections. If issues persist, contact support. |
| Filament not extruding / Clogging | Nozzle clog, tangled filament, incorrect temperature. | Utilize the printer's clog detection feature to pause and clear the nozzle. Ensure filament is untangled and loaded correctly. Verify print temperature settings. |
| Prints not adhering to bed | Uneven bed, dirty print surface, incorrect bed temperature, first layer height issues. | Perform auto-leveling. Clean the magnetic build plate. Adjust bed temperature according to filament type. Calibrate first layer height. |
| Visible ringing or ghosting on prints | Loose belts, excessive print speed/acceleration, unstable printer placement. | Adjust belt tension using the X-axis and Y-axis adjusters. Reduce print speed and acceleration settings in your slicer. Ensure the printer is on a stable surface. |
| Filament run-out or breakage during print | スプールが空、フィラメントが脆い、張力が強すぎる。 | The printer will pause automatically. Replace the filament and resume printing. Store filament properly to prevent brittleness. |
7. 仕様
| 特徴 | 詳細 |
|---|---|
| モデル | SUNLU T3 (Terminator 3) |
| 印刷技術 | FDM（熱溶解積層法） |
| 印刷サイズ | 220 x 220 x 250 mm (8.66 x 8.66 x 9.84 インチ) |
| 最大印刷速度 | 250mm/秒 |
| 製品寸法 | 17.32 x 15.75 x 18.5インチ |
| アイテム重量 | 15.98ポンド（約7.25kg） |
| 材料 | アルミニウム（フレーム） |
| 色 | T3 ブラック |
| マザーボード | 32-bit silent motherboard |
| 騒音レベル | Lower than 45dB (Full Silent Printing) |
| 平準化 | 16-point 3D Touch Auto Leveling |
| 押出機 | Double Gear Metal Extruder |
| ビルドサーフェス | 取り外し可能な磁気プラットフォーム |
| オンモードの消費電力 | 360ワット |
Image: The physical dimensions of the SUNLU T3 3D Printer.
8. 保証情報
Specific warranty details are not provided in the available product information. Please refer to the official SUNLU website or contact SUNLU customer service for comprehensive warranty terms and conditions.
9. カスタマーサポート
For further assistance, technical support, or inquiries, please visit the official SUNLU store or contact their customer service department.
