AXIS C1210-E ネットワーク天井スピーカー ユーザーマニュアル

1. はじめに

This manual provides instructions for the installation, operation, and maintenance of the AXIS C1210-E Network Ceiling Speaker. The AXIS C1210-E is an all-in-one speaker system designed for versatile audio applications, including voice announcements, safety instructions, and remote warnings.

主な特徴:

• オールインワンスピーカーシステム
• Connects to standard network
• Easy installation with just one network cable (PoE)
• Scalable and easy to integrate
• Remote health testing
• Built-in microphone for 2-way audio
• Support for I/O integration
• Preconfigured Digital Signal Processor (DSP) for clear voice
• Built-in LED for visual status information
• Integrated AXIS Audio Manager Edge application

2. セットアップとインストール

2.1 パッケージ内容

すべてのコンポーネントが存在することを確認します。

• AXIS C1210-E Network Ceiling Speaker
• インストールガイド（このマニュアルを参照してください）
• Mounting hardware (if included, check packaging)

2.2 スピーカーの取り付け

The AXIS C1210-E is designed for ceiling mounting. Ensure the chosen location provides adequate space and structural support.

画像: 背面 view of the AXIS C1210-E speaker showing the mounting enclosure and connection ports. This view illustrates how the speaker integrates into a ceiling.

1. 天井の開口部を準備します。 Cut a circular opening in the ceiling according to the provided template (if applicable, refer to separate mounting template).
2. ネットワークケーブルを接続します: Connect a standard Ethernet cable (Cat5e or higher) to the speaker's network port. This cable provides both data and Power over Ethernet (PoE).
3. スピーカーを固定する: Insert the speaker into the ceiling opening and secure it using the integrated mounting clamps. Ensure a snug fit.
4. グリルを取り付ける: Once secured, attach the front grille to the speaker.

2.3 ネットワーク接続と電源

The AXIS C1210-E connects to your standard network using a single Ethernet cable. It supports Power over Ethernet (PoE), eliminating the need for a separate power supply.

• Connect the Ethernet cable from a PoE-enabled switch or injector to the speaker's RJ45 port.
• The speaker will power on automatically once connected to a PoE source.

2.4初期構成

Upon first power-up, the speaker will acquire an IP address from your network's DHCP server. Use Axis IP Utility or your network management tools to discover the device and access its web 詳細な設定のためのインターフェース。

• Web インターフェースアクセス: 開く web browser and enter the speaker's IP address.
• ログイン： Use the default administrator credentials (refer to Axis documentation for default username/password).
• システム統合: Configure integration with your Video Management Software (VMS), Voice over IP (VoIP) telephony (SIP), or other analytics platforms as required.

3. 操作

3.1 Audio Announcements and Messaging

The AXIS C1210-E can deliver live or prerecorded voice messages for various purposes, including general information, safety instructions, and security warnings.

• Live Announcements: Utilize integrated VMS or SIP-based telephony systems to broadcast live voice messages through the speaker.
• Prerecorded Messages: Upload and schedule prerecorded audio files for playback via the AXIS Audio Manager Edge application.

3.2 双方向音声通信

The built-in microphone enables two-way audio communication, allowing for interaction with individuals near the speaker.

• Talk-Back Functionality: Initiate conversations from your control system.
• 外部マイク： An external microphone input is available for situations where the speaker is installed far from the intended audience, allowing for clearer audio capture.

3.3 AXIS Audio Manager Edge

The integrated AXIS Audio Manager Edge application provides comprehensive control over your audio system.

• ゾーン管理: Group speakers into zones for targeted audio delivery.
• Content Scheduling: Schedule specific audio content to play at designated times.
• Content Prioritization: Configure priority levels for different audio sources (e.g., emergency announcements override background music).

3.4 Visual Status Indicator

A built-in LED provides visual status information, indicating operational status or specific events.

画像: 正面 view of the AXIS C1210-E speaker, highlighting the discreet LED indicator on the grille. This LED provides visual feedback on the speaker's status.

4. メンテナンス

4.1 Remote Health Testing

The AXIS C1210-E supports remote health testing functionality, allowing you to verify the operational status of the speaker without physical inspection.

• Access this feature through the speaker's web interface or integrated management software.
• Regularly perform health tests to ensure continuous system functionality.

4.2 クリーニング

To maintain optimal performance and appearance, periodically clean the speaker.

• 外側の表面を拭くときは、柔らかく乾いた布を使用してください。
• 研磨剤入りの洗剤や溶剤は仕上げを傷める可能性があるので使用しないでください。
• Ensure no moisture enters the speaker components.

5。 トラブルシューティング

This section provides solutions to common issues you might encounter with your AXIS C1210-E speaker.

5.1 No Power/No Network Connection

• PoEソースを確認します: Ensure the Ethernet cable is connected to a PoE-enabled switch or injector that is functioning correctly.
• ケーブルの完全性: Verify the Ethernet cable is not damaged and is securely connected at both ends.
• ネットワークステータス： Confirm that your network is operational and providing DHCP services if configured.

5.2 オーディオ出力なし

• 音量設定： Check the volume settings in the speaker's web interface or your audio management application.
• オーディオソース: Ensure the audio source (e.g., VMS, SIP call, scheduled content) is active and correctly configured.
• Remote Health Test: Perform a remote health test to diagnose internal speaker component issues.

5.3 双方向オーディオの問題

• マイク設定: Verify microphone sensitivity and gain settings in the web インタフェース。
• 外部マイク： If using an external microphone, ensure it is properly connected and functional.
• ネットワーク遅延: High network latency can affect two-way audio quality. Check network performance.

5.4 Speaker Not Discoverable on Network

• ネットワーク接続: Confirm physical network connection and PoE status.
• IPアドレス: Ensure the speaker is receiving an IP address (check DHCP server logs) or has a correctly configured static IP.
• ファイアウォール: Check for any firewall rules on your network that might be blocking communication with the speaker.

6. 仕様

Detailed technical specifications for the AXIS C1210-E Network Ceiling Speaker.

7. 保証情報

The AXIS C1210-E Network Ceiling Speaker comes with a limited warranty. For specific terms, conditions, and duration of your warranty, please refer to the official Axis Communications warranty documentation available on their webサイトをご覧いただくか、正規販売店にお問い合わせください。

保証請求のために購入証明書を保管してください。

8.サポートおよび連絡先情報

For technical support, additional documentation, software downloads, and frequently asked questions, please visit the official Axis Communications support webサイト：

www.axis.com/support

You may also contact your local Axis Communications representative or authorized reseller for assistance.