導入
The MOUNTUP Vertical Dual Monitor Stand is designed to optimize your workspace by stacking two screens vertically. This free-standing desk mount provides a stable and ergonomic solution for monitors ranging from 13 to 32 inches, with a weight capacity of up to 33 lbs per monitor. It supports VESA mounting patterns of 100 x 100mm and 75 x 75mm, offering versatile compatibility and enhanced viewing comfort through extensive articulation and height adjustment capabilities.
安全情報
設置およびご使用の前に、必ずすべての説明書をよくお読みになり、理解してください。指示に従わない場合、人身傷害や物的損害が発生する可能性があります。この説明書は、今後の参考のために保管してください。
- 重量容量: Do not exceed the maximum weight capacity of 33 lbs (15 kg) per monitor. Ensure your monitors' weight, including accessories, is within this limit.
- VESAの互換性： Verify that your monitors have VESA mounting patterns of 75x75mm or 100x100mm.
- 安定した表面： Install the monitor stand on a stable, level, and sufficiently strong desk or surface that can support the combined weight of the stand and monitors.
- 組み立て： Assemble the product according to the instructions provided. Do not use power tools for assembly unless specifically instructed, as overtightening may damage components.
- ケーブル管理 Route cables safely to prevent tripping hazards and ensure free movement of the monitor arms.
- 子供たち： 小さな部品や梱包材は窒息の危険があるため、お子様の手の届かないところに保管してください。
パッケージ内容
Before beginning installation, ensure all parts are present and undamaged. If any parts are missing or damaged, please contact MOUNTUP customer service for assistance.
- Vertical Pole with VESA Mounts
- Free-Standing Tempered Glass Base
- 取り付けハードウェア（ネジ、ワッシャー、スペーサー）
- Assembly Tools (Allen wrenches, etc.)
- ケーブル管理クリップ
セットアップとインストール
Follow these steps for a secure and efficient installation. It is recommended to have assistance when lifting and mounting monitors.
ステップ1：ベースとポールを組み立てる
Figure 1: Product Dimensions and Compatibility. This diagram illustrates the overall height of the stand (33.9 inches), compatibility with monitors from 13 to 32 inches, a maximum weight capacity of 33 lbs per monitor, and VESA patterns of 75x75mm and 100x100mm.
Attach the vertical pole to the tempered glass base using the provided screws. Ensure all connections are tight and secure for stability.
Figure 2: Free-Standing Tempered Glass Base. The image highlights the smooth, rounded edges of the base for safety and confirms that no drilling is required for installation, preserving your desktop surface.
ステップ2: VESAプレートをモニターに取り付ける
Secure the VESA mounting plates to the back of your monitors using the appropriate screws and spacers from the hardware kit. Ensure the screws are tightened firmly but do not overtighten.
Figure 3: VESA Plate Attachment and Monitor Mounting. This composite image demonstrates the process of attaching the VESA plate to the back of a monitor and then sliding the monitor onto the vertical pole of the stand.
Step 3: Mount Monitors onto the Stand
Carefully slide the monitors, with VESA plates attached, onto the vertical pole. Use the quick-release VESA mount feature for effortless attachment. Adjust the height of each monitor along the pole to your desired viewing level. Secure the monitors in place using the safety lock mechanism.
Figure 4: Fully Assembled Dual Monitor Stand. This image shows the MOUNTUP Vertical Dual Monitor Stand with two monitors successfully mounted in a stacked configuration, ready for use.
Figure 5: Cable Management and Stability Features. 後部 view of the stand demonstrates the integrated cable management clips that help keep cables organized and out of sight. It also highlights the safety lock for secure monitor positioning and rubber anti-slip feet on the base for added stability.
運営と調整
The MOUNTUP Vertical Dual Monitor Stand offers extensive adjustability to achieve optimal ergonomic viewing。
高さ調整
Monitors can be adjusted vertically along the pole. The stand offers 11 different height positions, providing a total of 12.44 inches of height movement. To adjust, loosen the safety lock, slide the monitor to the desired height, and re-tighten the lock.
Figure 6: Tilt and Height Adjustment. This illustration shows the monitor's ability to tilt 30 degrees up or down and demonstrates the multiple height adjustment levels available along the vertical pole.
傾斜調整
Each monitor can be tilted 30 degrees up or down to reduce glare and optimize viewing angles. Loosen the tilt mechanism, adjust the monitor, and then re-tighten to secure.
スイベル調整
Monitors can be swiveled 25 degrees right or left. This allows for easy screen sharing or adjusting the angle for different tasks. The actual swivel angle may be determined by the screen size if the stand is placed against a wall.
Figure 7: Swivel Functionality. This image demonstrates the monitor's ability to swivel up to 25 degrees in either direction, allowing for flexible view角度とコラボレーション。
回転
The monitors can be rotated 360 degrees, allowing for quick switching between landscape and portrait viewing modes. This is particularly useful for coding, document review, or graphic design. The extent of rotation is influenced by the monitor's size.
Figure 8: 360-Degree Rotation. This image illustrates how monitors can be rotated a full 360 degrees, enabling users to switch between landscape and portrait orientations as needed for various tasks.
メンテナンス
To ensure the longevity and proper functioning of your MOUNTUP Vertical Dual Monitor Stand, follow these simple maintenance guidelines:
- クリーニング： Wipe the stand and base with a soft, damp 布で拭いてください。仕上げを傷める可能性のある研磨剤入りの洗剤や溶剤の使用は避けてください。
- 接続を確認してください: すべてのネジと接続部がしっかりと固定されているか定期的に点検してください。必要に応じて締め直してください。
- 潤滑: No lubrication is typically required for the moving parts. If any movement becomes stiff, ensure no debris is obstructing the mechanism.
トラブルシューティング
モニタースタンドで問題が発生した場合は、次の一般的な問題と解決策を参照してください。
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| スタンドがぐらついたり不安定になったりします。 | 接続が緩んでいる、表面が平らでない、負荷がかかりすぎている。 | Ensure all screws are tightened. Place on a flat, stable surface. Verify monitor weight is within limits. |
| Monitors are difficult to adjust (tilt/swivel/rotate). | Adjustment mechanism too tight; debris. | Check if adjustment screws are overtightened. Clear any obstructions. |
| モニターがたわんだり、位置を保持しなかったりします。 | Adjustment mechanism too loose; overloaded. | Tighten the relevant adjustment screws. Ensure monitor weight is within limits. |
| 組み立て中に部品が不足しました。 | 梱包エラーです。 | Contact MOUNTUP customer support immediately for replacement parts. |
If the issue persists, please contact MOUNTUP customer support for further assistance.
仕様
- ブランド： マウントアップ
- モデル番号: MU1006
- 材料： 金属、強化ガラス
- 色： 黒
- 商品の重量: 10.72ポンド
- 製品寸法: 15.35 x 10.2 x 2.1 inches (Base)
- 対応モニターサイズ: 13～32インチ
- 重量容量: Up to 33 lbs (15 kg) per monitor
- VESAの互換性： 75x75mm、100x100mm
- 移動タイプ: Height Adjusting, Rotate, Swivel, Tilt
- 最大傾斜角度: 30度
- スイベル角度: 25度（左/右）
- 回転： 360度
- 取り付けタイプ: Tabletop Mount (Free-Standing)
保証とサポート
The MOUNTUP Vertical Dual Monitor Stand comes with a 3年間のメーカーサポート. For any questions, concerns, or technical assistance, please contact MOUNTUP customer service.
You can also refer to the official PDF manuals for more detailed instructions:
Visit the official MOUNTUP Store for more products and information: MOUNTUP Store