1. はじめに
The WORKPRO 60-inch Height Adjustable Work Table is a versatile and robust workbench designed for various applications, including garages, warehouses, basements, workshops, and crafting rooms. It features a durable wooden top and a sturdy steel frame, offering ample space and a high load capacity. The table's height can be easily adjusted using a crank handle, and it provides two assembly options: mobile casters or stable leveling feet.
2. 安全情報
- Always ensure the table is on a stable, level surface before use.
- 最大積載量 500 ポンド (226.8 kg) を超えないようにしてください。
- When adjusting the height, ensure no objects are obstructing the movement of the legs or crank mechanism.
- If using casters, ensure they are locked when the table is in a stationary position to prevent accidental movement.
- 高さ調整中は可動部分に手や指を近づけないでください。
- Regularly inspect all bolts and fasteners to ensure they are tight. Retighten as necessary.
- Do not allow children to operate the height adjustment mechanism unsupervised.
3. パッケージ内容
組み立てを始める前に、すべての部品が揃っていることを確認してください。部品が不足または破損している場合は、カスタマーサポートまでご連絡ください。
- Wooden Tabletop (60" x 24")
- Steel Frame Components (Legs, Crossbar, Support Rail)
- クランクハンドル
- Universal Casters with Brakes (4 units)
- Leveling Feet (4 units)
- Assembly Hardware (Bolts, Washers, Nuts, Wrenches)
- 取扱説明書（本書）
4. セットアップと組み立て
詳細を参照してください インストールマニュアル（PDF） for step-by-step assembly instructions. Below are general guidelines and key considerations.
4.1 Choose Your Base Option
The workbench offers two base configurations: casters for mobility or leveling feet for stationary stability.
Image showing the workbench with both leveling feet and casters as assembly options.
閉じる view of the stable leveling feet.
閉じる view of the universal casters with brakes.
- キャスター： Provide 360-degree rotation for easy movement. Ensure brakes are engaged when the table is stationary.
- レベリングフィート: Offer maximum stability and prevent wobbling on uneven surfaces.
4.2 Crank Handle Installation
The crank handle can be attached to either side of the desktop for convenient height adjustment.
詳細 view of the crank handle mechanism.
4.3 Support Rail Placement
The support rail can be installed in three different locations to accommodate various storage solutions, such as tool storage or rolling cabinets underneath the table.
Image illustrating the sturdy steel frame and adjustable support rod.
5. 操作手順
5.1 テーブルの高さ調整
The WORKPRO workbench features a manual crank handle for smooth height adjustment. The table height can be adjusted from 29 inches (73.66 cm) to 38 inches (96.52 cm).
- Locate the crank handle on either side of the table.
- Turn the crank handle clockwise to raise the table.
- Turn the crank handle counter-clockwise to lower the table.
- Adjust to your desired height for sitting or standing work.
Diagram showing the height adjustment range of the workbench.
5.2 Using Casters (if installed)
If your workbench is assembled with casters, you can easily move it around your workspace. Each caster is equipped with a brake for stability.
- To move the table: Unlock all four caster brakes by flipping the lever upwards.
- To secure the table: Lock all four caster brakes by pressing the lever downwards.
A person demonstrating the mobility of the workbench with casters.
6. メンテナンス
- クリーニング： 木製のトップを広告で拭きますamp cloth and mild detergent. Avoid abrasive cleaners. For the steel frame, use a soft cloth.
- 潤滑: Periodically apply a small amount of silicone spray or light oil to the height adjustment mechanism to ensure smooth operation.
- 留め具: Check all bolts and screws regularly and tighten them as needed to maintain stability and prevent wobbling.
- ウッドトップのお手入れ： The rubber wood top has a waterproof and scratch-resistant coating. Avoid placing extremely hot items directly on the surface.
7。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| テーブルがぐらぐらしています。 | Loose fasteners; uneven floor (if using leveling feet); casters unlocked (if using casters). | Tighten all assembly bolts. Adjust leveling feet to compensate for unevenness. Ensure caster brakes are locked. |
| 高さ調整が難しい。 | Mechanism needs lubrication; obstruction in the lifting columns. | Apply silicone spray or light oil to the lifting columns. Check for any obstructions and remove them. |
| キャスターがスムーズに回転しません。 | Debris in wheels; brakes partially engaged. | Clean any debris from the caster wheels. Ensure brakes are fully disengaged. |
8. 仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | W082057AE |
| 卓上寸法 | 60インチ（幅）×24インチ（奥行き） |
| 高さ調節範囲 | 29インチから38インチ（73.66cmから96.52cm） |
| 最大積載量 | 500ポンド（226.8kg） |
| テーブルトップ素材 | 1-3/16 inch thick Rubber Wood with waterproof and scratch-resistant coating |
| フレーム素材 | 耐久性の高い合金鋼 |
| 組み立てオプション | Casters with brakes or Leveling Feet |
| アイテム重量 | 107.5ポンド（48.76kg） |
| 欧州連合 | 820909777526 |
9. 保証とサポート
WORKPRO stands behind the quality of its products. For warranty information, customer support, or to purchase replacement parts, please visit the official WORKPRO store or contact their customer service directly.
Official WORKPRO Store: AmazonのWORKPROストア
追加リソース: インストールマニュアル（PDF）をダウンロード
