Weiser Prescott/Katella サテンニッケル ハンドルセット（デッドボルトは付属しません） - 取扱説明書

1.製品オーバーview

The Weiser Prescott/Katella Handleset in Satin Nickel offers a blend of modern design and reliable functionality for exterior doors. This handleset is designed for keyed entry and security, but it does not include a deadbolt. It is intended to be paired with a separate Weiser deadbolt, which can be electronic or mechanical, allowing for personalized security solutions.

図1: 外観 view of the Weiser Prescott/Katella Satin Nickel Handleset.

The handleset is reversible, accommodating both left-handed and right-handed door configurations. Its satin nickel finish provides a clean and contemporary aesthetic, complementing various home decors.

2. 箱の中身

インストールを開始する前に、すべてのコンポーネントが揃っていることを確認してください。

• ドアハンドル（外装）
• レバー（内装）
• ラッチ
• ストライキ
• Hardware (screws, pins, etc.)

Figure 2: Weiser Prescott/Katella Handleset on a door, ready for a separate deadbolt installation.

3. インストール

3.1. Door Specifications & Preparation

Before installation, verify your door meets the following specifications:

• ドアの厚さ: 1-3/8" to 1-3/4"
• Latch Backset: 2-3/8" to 2-3/4"
• クロスボア: 2-1/8インチ

This handleset is designed for easy installation with basic tools, typically a screwdriver. No additional holes are required if your door is pre-drilled to standard specifications.

Figure 3: Illustrative image of door handle installation using a screwdriver.

3.2. インストール手順

Follow these general steps for installing your handleset. Refer to the detailed video for visual guidance.

1. ラッチをドアの端に取り付けます。
2. Install the exterior handle assembly, ensuring the spindle aligns with the latch.
3. Install the interior lever, aligning it with the exterior assembly.
4. すべてのコンポーネントを付属のネジで固定します。
5. ドア枠に受座を取り付けます。

図4: 内部 view of the handleset lever.

4. 操作

The Weiser Prescott/Katella Handleset provides secure entry for your exterior door. To operate:

• 外側から開ける場合： Insert your key into the keyhole and turn to unlock. Depress the thumb latch to retract the bolt and open the door.
• 内側から開ける場合： Simply depress the interior lever to retract the bolt and open the door.
• 外側からロックするには: Close the door. Ensure the latch is fully extended. If paired with a deadbolt, engage the deadbolt.
• 内側からロックするには: Close the door. Depress the interior lever to ensure the latch is fully extended. If paired with a deadbolt, engage the deadbolt.

Figure 5: Handleset shown with a separate deadbolt (not included with this product).

5. SmartKey Security Feature

This Weiser handleset is compatible with SmartKey Security technology, allowing you to re-key your lock yourself in seconds. This feature provides convenience and enhanced security, enabling you to match your handleset key to other Weiser SmartKey locks you may own.

5.1. Re-Keying Your Lock

To re-key your lock using SmartKey technology:

1. Insert your functioning key and turn it 1/4 turn clockwise.
2. Insert the SmartKey Learn Tool fully and firmly into the SmartKey hole. Remove the SmartKey Learn Tool.
3. 機能しているキーを取り外します。
4. Insert your new key fully and firmly into the keyhole. Turn it 1/2 turn counter-clockwise.
5. Your lock is now re-keyed. Test the new key to ensure proper operation.

Figure 6: Weiser SmartKey Security features.

Figure 7: Visual steps for re-keying your SmartKey lock.

6. メンテナンス

To ensure the longevity and optimal performance of your Weiser handleset, follow these maintenance guidelines:

• クリーニング： ハンドルセットは定期的に柔らかくて清潔な布で拭いてください。amp 布で拭いてください。研磨剤入りの洗剤、溶剤、または刺激の強い化学薬品は、仕上げを傷める可能性があるため、使用しないでください。
• 潤滑: Periodically apply a silicone-based lubricant to the latch mechanism and key cylinder to ensure smooth operation. Do not use oil-based lubricants.
• 締め付けネジ: Check all mounting screws periodically and tighten them if necessary to prevent looseness.

7。 トラブルシューティング

ハンドルセットで問題が発生した場合は、次の一般的な解決策を検討してください。

• ハンドルが緩んでいる: Check and tighten all visible screws on both the interior and exterior components.
• Latch Not Retracting Smoothly: Apply a silicone-based lubricant to the latch mechanism. Ensure no debris is obstructing the latch.
• キーが回らない: Ensure the key is fully inserted. Check for any obstructions in the keyway. If using SmartKey, ensure the re-keying process was completed correctly.
• ドアが閉まらない: Verify the strike plate on the door frame is properly aligned with the latch. Adjust the strike plate if needed.

For persistent issues, contact Weiser customer support.

8. 仕様

9.保証とサポート

Your Weiser Prescott/Katella Handleset is backed by a 限定生涯機械および仕上げ保証. This warranty covers defects in material and workmanship for the lifetime of the original residential user.

For warranty claims, technical assistance, or further inquiries, please contact Weiser customer support. Refer to the official Weiser web最新の連絡先情報と詳細な保証条件については、当社のサイトをご覧ください。