RYOBI ONEAND 18V 5.5IN. Cordless Flooring Saw

1. はじめに

Thank you for choosing the RYOBI ONEAND 18V 5.5IN. Cordless Flooring Saw. This manual provides essential information for the safe operation, maintenance, and troubleshooting of your new tool. Please read it thoroughly before use and keep it for future reference.

含まれるコンポーネント:

• 24T Thin Kerf Flooring Blade
• プッシュスティック
• ゴミ袋
• Blade Wrenches
• 取扱説明書（本書）

2.一般的な安全情報

Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury. Keep your work area clean and well-lit. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust. Keep children and bystanders away while operating a power tool. Wear appropriate personal protective equipment, including eye protection, hearing protection, and gloves.

3. セットアップ

Figure 1: The RYOBI ONEAND 18V 5.5IN. Cordless Flooring Saw, showcasing its compact design, blade guard, and dust collection bag. The tool is designed for precision cutting of various flooring materials.

3.1 組み立て

1. ブレードの取り付け: Using the provided blade wrenches, securely attach the 24T Thin Kerf Flooring Blade to the saw spindle. Ensure the blade is oriented correctly for cutting.
2. ダストバッグアタッチメント: Connect the dust bag to the saw's dust port. This helps manage sawdust and maintain a cleaner work environment.
3. Push Stick Placement: Keep the push stick readily accessible. It is crucial for safely guiding workpieces through the saw blade.

3.2 バッテリーの取り付け

Ensure the 18V battery is fully charged before installation. Slide the battery pack into the tool's battery port until it clicks securely into place. To remove, press the release latch and slide the battery out.

4. 操作手順

4.1 電源オン/オフ

To turn the saw ON, depress the safety switch and then squeeze the trigger. To turn the saw OFF, release the trigger. Always ensure the saw is off and the blade has stopped rotating before making any adjustments or leaving the tool unattended.

4.2 深さ調整

The saw features a depth adjustment mechanism for precise control over cutting depth. Loosen the depth adjustment knob, set the desired depth, and then securely tighten the knob before making a cut. This ensures the blade cuts only as deep as necessary, preventing damage to underlying surfaces.

4.3 Angle Adjustment (Miter and Bevel)

This flooring saw allows for both miter (horizontal) and bevel (vertical) angle adjustments to accommodate various cutting needs.

• Miter Adjustment: To change the miter angle, loosen the miter lock knob, rotate the saw table to the desired angle (e.g., 0°, 15°, 22.5°, 30°, 45°), and then tighten the knob to secure it.
• ベベル調整: For bevel cuts, loosen the bevel lock lever located at the rear of the saw. Tilt the saw head to the desired angle (e.g., up to 45°), and then re-tighten the lever.

4.4 カットを行う

ワークピースがしっかりと固定されていることを常に確認してくださいamped or held against the fence. Use the push stick when cutting smaller pieces. Guide the saw smoothly through the material, allowing the blade to do the work. Avoid forcing the saw, as this can lead to kickback or poor cut quality.

5. メンテナンス

5.1 ブレード交換

Always disconnect the battery before attempting to change the blade. Use the provided blade wrenches to loosen the arbor nut, remove the old blade, and install the new 24T Thin Kerf Flooring Blade. Ensure the new blade is correctly seated and the arbor nut is securely tightened.

5.2 クリーニング

Regularly empty the dust bag to maintain efficient dust collection. Use a dry cloth to wipe down the saw after each use. Periodically inspect the blade guard and other moving parts for debris buildup and clean as necessary to ensure smooth operation.

6。 トラブルシューティング

• のこぎりが始動しない: Check if the battery is fully charged and properly installed. Ensure the safety switch is depressed before squeezing the trigger.
• カット品質が悪い: A dull or damaged blade can cause poor cut quality. Replace the blade if necessary. Ensure the workpiece is stable and the saw is guided smoothly.
• 過度のほこり: Verify the dust bag is properly attached and not full. Clean the dust port if it appears clogged.

7. 仕様

8. 保証とサポート

8.1 保証情報

This RYOBI ONEAND 18V 5.5IN. Cordless Flooring Saw (Model PGC21B) comes with a 3-Year Limited Warranty. Please refer to the warranty card included with your product for full terms and conditions, or visit the official RYOBI web詳細についてはサイトをご覧ください。

8.2 カスタマーサポート

For technical assistance, replacement parts, or any questions regarding your product, please contact RYOBI Customer Service. Contact information can typically be found on the RYOBI official webサイトまたは製品パッケージに記載されています。