StarTech Heavy Duty Dual Screen Rolling TV Stand (STNDMTVDUO) User Manual

導入

This manual provides instructions for the safe and proper assembly, operation, and maintenance of your StarTech Heavy Duty Dual Screen Rolling TV Stand (STNDMTVDUO). This mobile TV stand is designed to support two 37-60 inch VESA displays, with a maximum weight capacity of 110 lbs (50 kg) per display. It features heavy-duty aluminum construction, a sturdy steel base, lockable casters, and integrated cable management.

最適なパフォーマンスと安全性を確保するために、設置および使用の前にこのマニュアルをよくお読みください。

安全情報

• 重量容量: Do not exceed the maximum weight capacity of 110 lbs (50 kg) per display. Exceeding this limit may result in instability and potential injury.
• 表示サイズ: This stand is designed for 37-60 inch displays. Ensure your displays fit within this range and have compatible VESA mounting patterns.
• 組み立て： Follow all assembly instructions carefully. Improper assembly can lead to product failure and injury. It is recommended to have at least two people for assembly and mounting displays.
• 安定性： Ensure the stand is placed on a stable, level surface. Always lock the casters when the stand is stationary to prevent accidental movement.
• 動き： When moving the stand, unlock the casters and push slowly and carefully, especially over uneven surfaces. Avoid sudden stops or turns.
• ケーブル管理 Properly route all cables through the integrated cable management system to prevent tripping hazards and cable damage.
• 子供たち： Keep children away from the TV stand during assembly and operation. Do not allow children to climb on or play with the stand or attached displays.

箱の中身

Verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, contact StarTech support.

• 1 ベース
• 4キャスター
• 2 Universal plates
• 2つのハンドル
• 1 Column, left
• 1 Column, right
• 2 Adapter brackets, left
• 2 Adapter brackets, right
• 2 Top covers
• 2 コネクタ
• 1 DVD shelf
• 1 Connector plate
• 1 Camera shelf
• 2 Fixing plates
• 1 サポートバー
• 2ノブ
• M4x6mm ネジ 15 本
• 2 M6x25mm screws (button head)
• M2x6mm ネジ 25 本
• 3 M4x6mm screws (flat head)
• M2x4mm ネジ 6 本
• 2 M6x25mm screws (hex head)
• M10x6mm ネジ 14 本
• M8x8mm ネジ 25 本
• 2 M6x25mm screws (carriage)
• 2スペーサー
• 2 Washers (round)
• 1六角レンチ
• 1レンチ
• M8x5mm ネジ 14 本
• M8x6mm ネジ 14 本
• M8x6mm ネジ 30 本
• M8x8mm ネジ 30 本
• M8x8mm ネジ 50 本
• 8 Washers (rectangular)
• 16 Spacers, small
• 16 Spacers, big
• マニュアル1冊

Image: All components of the StarTech Dual Screen Rolling TV Stand laid out for assembly.

セットアップと組み立て

Follow these steps to assemble your dual screen rolling TV stand. It is recommended to perform assembly with at least two people due to the size and weight of the components.

1. キャスターをベースに取り付ける: Secure the four lockable casters to the sturdy steel base using the provided hardware. Ensure they are tightened securely.
2. Assemble Columns: Connect the left and right columns to the base. These columns provide the vertical support for the displays and allow for height adjustment.
3. Install Display Mounting Bar: Attach the horizontal display mounting bar to the top of the columns. This bar will hold the universal display plates.
4. Mount Universal Plates: Secure the universal plates to the display mounting bar. These plates are compatible with various VESA patterns (200x200 to 600x400).
5. Attach Media Shelves: Install the DVD shelf and camera shelf at your desired heights. The DVD shelf can be raised up to 28.3 inches (0.7m) from the floor, and the webcam shelf up to 93.5 inches (2.4m).
6. ケーブルの配線: Utilize the built-in cable management system within the columns to keep cables organized and hidden from view.
7. Mount Displays: Carefully attach your 37-60 inch VESA compatible displays to the universal plates using the appropriate screws and spacers. Ensure the displays are securely fastened.

Image: Fully assembled StarTech Dual Screen Rolling TV Stand with two displays mounted.

Image: Detail of a lockable caster wheel, essential for securing the stand in place.

画像： View of the built-in cable management opening, designed to keep cables organized and out of sight.

操作手順

1. ディスプレイの高さの調整: The stand allows for a synchronized display height adjustment range of 19 inches (0.5m). The center of the TV can be adjusted from 47.2 inches (1.2m) to 66.4 inches (1.7m) from the floor. Use the height indicators on the columns for precise adjustment.
2. Tilting Displays: Each display can be tilted +5 to -10 degrees to achieve the optimal viewing angle. Adjust the tilt mechanisms located on the universal plates.
3. スタンドの移動: To move the stand, ensure all four casters are unlocked. Use the attached handles to guide the stand. Always move the stand slowly and carefully.
4. スタンドの固定: Once the stand is in the desired position, engage the locks on all four casters to prevent unintended movement.
5. 棚の調整: の webcam shelf and equipment shelf can be adjusted independently of each other and the displays. Loosen the securing knobs, adjust to the desired height, and re-tighten.

Image: Detail showing the height indicator for precise adjustment and an attached handle for easy movement.

Image: Close-up of the adjustable media shelf, capable of holding various equipment.

メンテナンス

• クリーニング： スタンドを柔らかくて乾いた布で拭いてください。amp 布で拭いてください。仕上げを傷める可能性のある研磨剤入りの洗剤や溶剤は使用しないでください。
• ハードウェア検査: すべてのネジとボルトがしっかりと締まっているか定期的に点検してください。必要に応じて締め直してください。
• キャスター機能: Inspect casters for smooth operation and ensure the locking mechanism functions correctly. Clean any debris from the wheels.
• ケーブル管理 Regularly check cables routed through the management system for any signs of wear or pinching.

トラブルシューティング

Problem: Stand is difficult to move.

解決： Ensure all four casters are unlocked. Check for any obstructions around the wheels. Clean any debris from the caster wheels.

Problem: Displays are not level or stable.

解決： Verify that all mounting screws securing the displays to the universal plates are tightened. Ensure the stand is on a level surface. Check that the height adjustment mechanisms are securely locked after adjustment.

問題: ケーブルが乱雑になったり、引っかかったりします。

解決： Reroute cables through the integrated cable management channels in the columns. Use cable ties if necessary to bundle excess cable length.

仕様

保証情報

StarTech.com provides a comprehensive warranty for this product. For detailed information regarding the warranty period and terms, please refer to the warranty card included with your product or visit the official StarTech.com webサイト。

テクニカルサポート

If you encounter any issues or have questions regarding the installation, operation, or maintenance of your StarTech Heavy Duty Dual Screen Rolling TV Stand, please contact StarTech.com technical support. Support contact information can be found on the official StarTech.com webサイトまたは製品に付属のドキュメントをご覧ください。