SMACO PCPエアコンプレッサー（モデルHeap-01）ユーザーマニュアル

1. 重要な安全情報

Please read this manual thoroughly before operating the SMACO PCP Air Compressor. Failure to follow these instructions may result in serious injury or property damage. Keep this manual for future reference.

• 年齢制限: This product is intended for use by individuals over 18 years old.
• 電気安全: Ensure the power source matches the compressor's requirements (12V DC or 110V-220V AC). Always connect to a grounded outlet when using AC power. Do not operate with damaged cords or plugs.
• 換気： Operate the compressor in a well-ventilated area to prevent overheating. Avoid enclosed spaces.
• 圧力制限： Never exceed the maximum operating pressure of 4500 PSI (30 MPa / 300 Bar). Over-pressurizing tanks can cause explosions.
• 冷却サイクル: The compressor requires a cool-down period. Do not operate continuously for more than 25 minutes. Allow 10-15 minutes for cooling after each 25-minute cycle.
• Moisture and Oil: This is an oil-free and water-free compressor. Do not add oil or water. Ensure the built-in oil-moisture filter is properly maintained.
• 接続: Ensure all connections are secure before operation. The inflatable interface diameter is 8mm.
• 監督： Although the unit has an auto-shutoff feature, it is recommended to monitor the inflation process.
• 高温面： The compressor and hose can become hot during operation. Avoid direct contact.

2.製品オーバーview

2.1 主な特徴

• Oil-Free & Water-Free Design: Features built-in high-power fans for efficient cooling, eliminating the need for external water pumps or oil.
• Pressure-Set & Auto-Shutoff: Set your desired pressure, and the compressor will automatically stop when reached.
• 速い膨張速度： Engine speed up to 2700r/min, air output 11L/min. Inflates a 0.5L container from 0 to 3000 PSI in approximately 11 minutes.
• デュアル電源機能: Operates on 12V DC from a car battery or 110V-220V AC household power.
• 軽量で持ち運びに便利: Weighs approximately 21 lbs with compact dimensions (9.6"L x 5.6"W x 10"H).

2.2 コンポーネントとコントロール

Familiarize yourself with the main components of your SMACO PCP Air Compressor.

Figure 1: SMACO PCP Air Compressor and Accessories. This image displays the SMACO PCP Air Compressor unit along with its various accessories, including connection hoses, power cables, spare O-rings, and tools for maintenance.

Figure 2: Compressor Features Diagram. An illustrative diagram pointing out the main functional parts of the compressor, such as the adjustable voltage switch, pressure gauge, built-in oil moisture filter, wire spool design for cables, pressure valve, power switch, and safety valve.

• 圧力計: Displays real-time pressure and allows setting target pressure.
• ブリードバルブ: Used to release residual pressure after inflation.
• Start/Off Buttons: Controls the compressor's operation.
• Power Switch (I/O/II): Selects DC (I) or AC (II) power mode.
• 電源入力ポート: For 12V DC (car battery clamps) and 110V-220V AC (standard power cord).
• Inflation Hose: Connects the compressor to the tank.
• 安全弁： An explosion-proof disc designed to release pressure if it exceeds safe limits.

3.セットアップガイド

3.1 開梱と検査

1. パッケージからすべてのコンポーネントを慎重に取り出します。
2. Inspect the compressor and accessories for any signs of damage during shipping. Contact customer support if any damage is found.
3. リストされているアクセサリがすべて揃っていることを確認してください。

3.2 初期接続

Before operating, ensure proper connections for power and inflation.

Figure 3: Adjustable Gauge, Pressure Relief, and Safety Valve. Detailed images showing the adjustable pressure gauge for setting desired pressure, the pressure relief valve that automatically exhausts air when peak pressure is reached, and the safety valve with an explosion-proof disc.

1. 膨張ホースを接続します。 Securely attach the inflation hose to the compressor's output port and to the tank you intend to fill. Ensure a tight seal to prevent leaks.
2. 電源を選択:
   • For AC Power (110V-220V): Plug the AC power cord into the compressor's AC input and then into a grounded wall outlet. The initial setting is typically for 110V AC.
   • For DC Power (12V Car Battery): 赤いclを接続するamp 車のバッテリーのプラス（+）端子と黒色の端子にamp to the negative (-) terminal. Ensure your car engine is running to provide stable power and prevent battery drain.

Figure 4: Dual Power Options. This image demonstrates the dual power capability of the compressor, showing it connected to a car battery for outdoor use and plugged into a standard AC outlet for indoor operation.

4. 操作手順

4.1 操作前チェックリスト

• すべての接続が安全であることを確認します。
• Verify the tank's maximum pressure rating.
• Confirm the compressor is in a well-ventilated area.
• Close the bleed valve before starting inflation.

4.2 インフレーションプロセス

1. 電源モードを選択: Set the power switch to 'I' for DC (12V) or 'II' for AC (110V-220V).
2. 目標圧力を設定する: Rotate the pressure setting knob on the gauge to your desired inflation pressure. The machine will automatically stop when this pressure is reached.
3. コンプレッサーを起動: Press the 'START' button. The compressor will begin to operate, and the cooling fans will activate.
4. 進捗状況を監視する: Observe the real-time pressure on the gauge. Although auto-shutoff is present, it is good practice to monitor the process.
5. 自動シャットオフ： The compressor will automatically stop filling when the preset pressure is achieved. The cooling fan will continue to run to dissipate heat.
6. 手動停止: To stop the compressor manually at any time, press the 'OFF' button.
7. 解放圧力: After inflation is complete and the compressor has stopped, slowly open the bleed valve to release any residual pressure in the hose before disconnecting.
8. 切断: Once pressure is fully released, disconnect the inflation hose from the tank and the compressor. Then, disconnect the power source.

4.3 Cooling Cycle

The compressor is designed with a duty cycle to prevent overheating. For optimal performance and longevity:

• Do not run the compressor for more than 25分連続.
• Allow the compressor to cool down for 10～15分 after each 25-minute operation cycle. The cooling fan will continue to run during this period.

Figure 5: Fan Cooling System. A visual representation of the compressor's internal fan cooling system, highlighting its oil-free operation, active cooling fans, integrated oil-moisture filter, and overall durable construction. A note indicates a 25-minute run / 10-minute cool-down duty cycle.

5. メンテナンス

Regular maintenance ensures the longevity and reliable operation of your compressor.

5.1 Oil-Moisture Filter

• The compressor features a built-in oil-moisture filter. Periodically check and replace the filter elements as needed to ensure clean, dry air output.
• Refer to the included accessories for spare filter elements and instructions on replacement.

5.2 一般的な手入れと保管

• Keep the compressor clean and free from dust and debris. Use a dry cloth for cleaning.
• Store the compressor in a cool, dry place, away from direct sunlight and moisture.
• Ensure power cables and hoses are neatly stored, utilizing the wire spool design if available.

6。 トラブルシューティング

If you encounter issues with your SMACO PCP Air Compressor, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact SMACO customer support.

7. 技術仕様

注：仕様は予告なく変更される場合があります。

8. 保証と顧客サポート

SMACO products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your purchase or visit the official SMACO webサイト。

If you have any questions, require technical assistance, or need to report an issue, please contact SMACO customer support through the retailer where you purchased the product or via the contact information provided on the official SMACO webサイト。