導入
This manual provides detailed instructions for the installation, operation, and maintenance of your Morimoto M LED 2.0 Bi-LED Projector. Designed for custom automotive retrofits, this universal projector lens offers both low beam and high beam functionality with an ECE-compliant RHD (Right-Hand Drive) beam pattern and cutoff. Please read this manual thoroughly before beginning any installation or operation to ensure proper function and safety.
Image: The Morimoto M LED 2.0 Bi-LED Projectors, showcasing the compact design and the product packaging.
含まれるもの
インストールを続行する前に、すべてのコンポーネントが揃っていて損傷がないことを確認してください。
- プロジェクター： 1x Morimoto M LED 2.0 Bi-LED RHD Projector
- ドライバ： 1x M LED 1.0 Driver
- ハードウェア: 1x Threaded shaft with lock ring
画像: 分解図 view of the projector components, illustrating the lens, housing, and associated hardware.
セットアップとインストール
The Morimoto M LED 2.0 Bi-LED Projector is designed for universal fitment in custom automotive retrofit applications. Due to the specialized nature of headlight retrofitting, professional installation is highly recommended. This section provides general guidance.
インストール前のチェック
- 電気作業を始める前に、車両のバッテリーが外されていることを確認してください。
- Confirm the projector fits within the intended headlight housing.
- すべてのコンポーネントに損傷の兆候がないか検査します。
プロジェクターの取り付け
The projector utilizes a threaded shaft for secure mounting. This allows for precise adjustment and locking into place within the headlight assembly.
- Carefully insert the projector into the headlight housing opening.
- Secure the projector using the provided threaded shaft and lock ring from the rear of the housing.
- Ensure the projector is oriented correctly for the RHD beam pattern.
電気接続
Connect the M LED 1.0 Driver to the projector and then to the vehicle's electrical system. The system operates on a 9-30V DC input.
- Connect the projector's cable to the input port on the M LED 1.0 Driver.
- Connect the driver's power input to the vehicle's low beam and high beam wiring. Consult a vehicle-specific wiring diagram if unsure.
- 短絡を防止するために、すべての接続が安全かつ適切に絶縁されていることを確認してください。
Image: The M LED 2.0 Bi-LED drivers, essential components for power regulation and function of the projectors.
手術
The Morimoto M LED 2.0 is a Bi-LED projector, meaning it provides both low beam and high beam functionality from a single projector unit. The transition between low and high beam is controlled by an internal cutoff shield mechanism.
Low Beam Function
When the low beams are activated, the internal cutoff shield is in place, creating a sharp, ECE-compliant RHD cutoff line. This prevents glare for oncoming traffic while providing ample illumination of the road ahead.
画像: Example of the RHD beam pattern with a distinct cutoff line, as projected on a test wall.
High Beam Function
When the high beams are activated, the cutoff shield retracts, allowing the full light output to be projected. This provides maximum illumination for increased visibility during night driving in areas without oncoming traffic.
Light Path and Cutoff Mechanism
The projector utilizes a sophisticated optical system, including a sub-reflector and cutoff shield, to precisely control the light output and beam pattern. The RHD beam pattern ensures proper illumination for right-hand drive vehicles.
Image: Technical diagram explaining the internal optics and how the light is managed to create the desired beam patterns.
メンテナンス
The Morimoto M LED 2.0 Bi-LED Projector is designed for long-term, maintenance-free operation. However, periodic checks can help ensure optimal performance.
- クリーニング： Keep the exterior lens of the headlight assembly clean from dirt and debris. Use a soft cloth and mild cleaning solution. Do not use abrasive cleaners.
- 検査： 配線接続部に摩耗や腐食の兆候がないか定期的に確認してください。
- 防水機能: The projector is designed to be waterproof. Ensure that the headlight housing itself is properly sealed after installation to protect the internal components from moisture.
トラブルシューティング
If you encounter issues with your Morimoto M LED 2.0 Bi-LED Projector, refer to the following common problems and solutions:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Projector does not illuminate | 電源がない、接続が緩んでいる、ドライバーに障害がある。 | Check all wiring connections. Verify power supply to the driver. Test the driver if possible. |
| High beam not activating | Wiring issue to high beam trigger, faulty driver. | Ensure high beam trigger wire is correctly connected to the driver. Check driver functionality. |
| Improper beam pattern/cutoff | Projector not seated correctly, internal component misalignment. | Re-check projector mounting and orientation. If issue persists, contact support. |
For issues not listed here or if troubleshooting steps do not resolve the problem, please contact Morimoto customer support.
技術仕様
| 特徴 | 詳細 |
|---|---|
| モデル | PR353 |
| 光源 | HML-3 7545 LED |
| 色温度 | 6300K |
| 関数 | Bi-LED (Low Beam & High Beam) |
| Traffic Pattern | RHD (Right-Hand Drive) with ECE Cutoff |
| 強度 | 70,000cd |
| 力 | 29.5W |
| 入力ボリュームtage | 9-30V DC |
| レンズ径 | 3.0インチ |
| レンズ素材 | サファイアガラス |
| 寸法（高さ×幅×奥行き） | 82mm x 95mm x 124mm (150mm with shaft) |
| シャフト径 | 35mm |
| アイテム重量 | 1ポンド |
| 特集 | 防水 |
| 自動車適合タイプ | ユニバーサルフィット |
保証とサポート
保証情報
The Morimoto M LED 2.0 Bi-LED Projector comes with a 5年間保証. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, please refer to the official Morimoto webサイトにアクセスするか、カスタマーサービスにお問い合わせください。
カスタマーサポート
For technical assistance, troubleshooting, or warranty inquiries, please contact Morimoto customer support. You can typically find contact information on the official Morimoto webサイトまたは正規販売店を通じてご購入いただけます。
オンラインリソース: 訪問する Morimoto Store on Amazon 追加の製品情報とリソースについては、こちらをご覧ください。
