DIGITUS 1D Barcode Scanner (Model DA-81001) User Manual

1.製品オーバーview

The Digitus 1D barcode scanner is designed for reliable and efficient barcode reading. Its ergonomic design ensures comfortable handling, making it suitable for various work environments such as retail, logistics, and commercial applications. The scanner performs 200 scans per minute and supports bi-directional scanning for optimal results. It is capable of reading high-resolution barcodes with up to 90 characters. Each successful scan is confirmed by both visual and acoustic signals. The device is built to be dust-proof and water-resistant (IP54), and its silicone case provides shock absorption to protect against damage.

主な特徴:

• Precise scanning of 1D barcodes.
• High-resolution scanning capability.
• 200 scans per minute, bi-directional operation.
• Supports barcodes up to 90 characters.
• Dust-proof and water-resistant (IP54) design.

2.セットアップガイド

Follow these steps to set up your DIGITUS 1D Barcode Scanner:

1. スキャナーを開梱します。 Carefully remove the barcode scanner and its USB RJ45 cable from the packaging.
2. ケーブルを接続します。 Insert the RJ45 end of the cable into the port at the base of the scanner handle. Ensure it clicks securely into place.
3. コンピュータに接続します: Plug the USB-A end of the cable into an available USB port on your computer or host device.
4. ドライバーのインストール: The scanner is typically plug-and-play (HID device) and should be recognized automatically by most operating systems without requiring additional driver installation. Wait for your system to confirm the device is ready for use.
5. 初期テスト: Open a text editor or a compatible application on your computer and scan a test barcode to confirm proper functionality.

画像: 下 view of the scanner, highlighting the RJ45 port for cable connection.

3. 操作手順

To operate your DIGITUS 1D Barcode Scanner:

1. スキャナーを保持する: Grip the scanner comfortably in your hand. The trigger button is located on the top of the handle.
2. Aim at Barcode: Point the scanner's reading window towards the barcode you wish to scan. Ensure the red laser line covers the entire barcode.
3. トリガーを押します: Press and hold the trigger button. The scanner will emit a red laser line.
4. スキャン確認: Upon a successful scan, the scanner will emit an audible beep and a visual indicator (e.g., an LED light) will flash. The barcode data will be transmitted to your connected computer as if typed from a keyboard.
5. Bi-directional Scanning: The scanner supports bi-directional scanning, meaning it can read barcodes regardless of the orientation of the scanner relative to the barcode.
6. スキャン距離: Maintain an appropriate distance from the barcode, typically a few centimeters, for optimal reading performance.

Image: User holding the scanner and aiming at a barcode on a package.

4. メンテナンスとケア

Proper maintenance ensures the longevity and performance of your scanner:

• クリーニング： The scanner is dust-proof and water-resistant (IP54). To clean the exterior, use a soft, damp cloth. Do not use harsh chemicals or abrasive cleaners. Ensure the scanning window is kept clean and free of smudges or debris for accurate reading.
• ケーブルのお手入れ: Avoid bending or twisting the USB RJ45 cable excessively. Do not pull the cable to disconnect it; always grasp the plug.
• ストレージ： 使用していないときは、スキャナーを極端な温度や直射日光を避け、清潔で乾燥した環境に保管してください。
• 衝撃保護: While the silicone case provides shock absorption, avoid dropping the scanner or subjecting it to severe impacts.

5。 トラブルシューティング

スキャナーで問題が発生した場合は、次の一般的な問題と解決策を参照してください。

• スキャナーの電源が入らない:
  • USB ケーブルがスキャナーとコンピューターの両方にしっかりと接続されていることを確認します。
  • スキャナーをコンピューターの別の USB ポートに接続してみてください。
  • コンピュータの USB ポートが機能していることを確認します。
• スキャナーがバーコードを読み取らない:
  • Ensure the barcode is a 1D type. This scanner does not read 2D barcodes (like QR codes).
  • Check that the scanning window is clean and free from obstructions.
  • スキャナーとバーコード間の距離と角度を調整します。
  • Ensure the barcode itself is not damaged or poorly printed.
  • Confirm the scanner is properly connected and recognized by your computer.
• No Data Transmission to Computer:
  • After a successful scan (audible beep and visual confirmation), ensure your cursor is active in a text field or application where data input is expected.
  • Restart your computer and reconnect the scanner.
  • Check your computer's device manager to ensure the scanner is listed and has no error indicators.

6. 技術仕様

7. 保証およびサポート情報

For warranty details and technical support, please refer to the documentation included with your product or visit the official Digitus web当サイトで保証されている保証は通常、購入日から一定期間、製造上の欠陥を対象としています。保証請求の際は、購入証明書を保管してください。

For further assistance, contact Digitus customer support through their official channels.