BRESSER Beaufort 5-in-1 Wireless Weather Station Meteorological Center User Manual

1.製品オーバーview

The BRESSER Beaufort 5-in-1 Wireless Weather Station Meteorological Center provides comprehensive weather data directly to your home. It includes an indoor display unit and a multi-sensor outdoor unit that measures temperature, humidity, wind speed, wind direction, and rainfall.

Image: The main display unit of the BRESSER Beaufort 5-in-1 Wireless Weather Station, showing indoor and outdoor temperature, humidity, wind data, forecast, barometric pressure, and time.

2. セットアップ

2.1 開梱とコンポーネントの確認

すべてのコンポーネントを慎重に開梱し、次のアイテムが揃っていることを確認します。

• メインディスプレイユニット
• 5-in-1 Outdoor Multi-Sensor Unit
• Mounting accessories (pole, base, screws)
• Power adapter for main unit
• 取扱説明書

2.2 バッテリーの取り付け

メインディスプレイユニット: Insert 1x CR2032 battery (not included) into the battery compartment for backup power. Connect the main unit to a power outlet using the provided adapter.

屋外マルチセンサーユニット: Insert 3x AA batteries (not included) into the battery compartment of the outdoor sensor. Ensure correct polarity.

2.3 Outdoor Sensor Placement and Mounting

正確な測定には屋外センサーを適切に配置することが重要です。

• Mount the sensor in an open area, away from obstructions like buildings or trees, to ensure accurate wind and rain measurements.
• Ensure the sensor is mounted level to guarantee accurate rainfall collection and wind direction.
• Orient the wind vane (the arrow) to point North during installation.
• Use the provided mounting pole and base to secure the sensor to a stable surface or pole.

画像: サイド view of the BRESSER 5-in-1 outdoor multi-sensor unit, showing the wind cups, wind vane, and rain collector.

2.4 初期同期

After installing batteries in both units, place them within close proximity. The main display unit will automatically search for and connect to the outdoor sensor. This process may take a few minutes. Once connected, outdoor data will appear on the display.

2.5 時刻と日付の設定

The weather station may attempt to synchronize time via RCC (Radio Controlled Clock) signal. If an RCC signal is not available in your region, or if you prefer, you can manually set the time and date using the buttons on the main display unit. Refer to the specific button functions in the Operating section for detailed instructions.

3. 気象観測所の操作

3.1ディスプレイオーバーview

The main display unit presents various weather parameters:

• 外： 屋外の温度と湿度。
• で： 室内の温度と湿度。
• 風： Current wind speed and direction, including gust speed.
• 予報： Weather forecast icons (sunny, cloudy, rainy, etc.).
• バロ： 気圧の測定値。
• 降雨： 日、週、または月ごとの降水量累計。
• 時間/日付： 現在の時刻、日付、曜日。
• BEAUFORT: Beaufort scale indicator for wind force.
• 風の寒さ： Calculated wind chill temperature.

画像: 正面 view of the BRESSER Beaufort 5-in-1 Wireless Weather Station display, highlighting the various data fields and their arrangement.

3.2 ボタンの機能

The display unit features several buttons for navigation and settings:

• 歴史： View historical data for various parameters.
• 最大/最小： Display maximum and minimum recorded values for temperature, humidity, etc. Press again to clear.
• ライト： Adjust backlight brightness or activate temporary backlight.
• モード/設定: Enter settings mode or confirm selections.
• 上/下矢印: メニュー間を移動したり、値を調整したりします。

3.3 アラームの設定

You can set alarms for specific weather conditions, such as high/low temperature, high wind speed, or heavy rainfall. Enter the alarm setting mode using the MODE/SET button and follow the on-screen prompts to configure your desired alarm thresholds.

3.4ユニットの選択

To change units (e.g., Celsius to Fahrenheit, mph to km/h, inHg to hPa), access the settings menu. Navigate to the unit selection option and choose your preferred measurement units.

4. メンテナンス

4.1 電池の交換

Replace batteries in the outdoor sensor when the low battery indicator appears on the main display. Due to the outdoor placement, ensure safe access for battery replacement. The main unit's backup battery should be replaced periodically, typically every 1-2 years.

4.2 クリーニング

Periodically clean the outdoor sensor unit to ensure accurate readings. Remove any debris from the rain collector, wind cups, and wind vane. Use a soft, damp cloth for cleaning; avoid abrasive cleaners or solvents. Clean the display unit with a soft, dry cloth.

4.3一般的なケア

Ensure the outdoor sensor is securely mounted and free from physical damage. Protect the main display unit from extreme temperatures, direct sunlight, and moisture.

5。 トラブルシューティング

• 本体にディスプレイが表示されない: Check power adapter connection and backup battery.
• 屋外データなし: Ensure outdoor sensor batteries are fresh and correctly installed. Verify both units are within range and attempt re-synchronization (refer to setup instructions). Check for obstructions between units.
• 不正確な読み取り: Ensure the outdoor sensor is mounted correctly (level, clear of obstructions, wind vane pointing North). Clean sensors if necessary.
• 時間/日付が正しくありません: If RCC synchronization fails, manually set the time and date.

6. 仕様

7. 保証とサポート

For warranty information, please refer to the documentation included with your product packaging or visit the official BRESSER website. For technical support or assistance, please contact BRESSER customer service directly through their official channels.