1. はじめに
The Infinity Reference-6001A is a high-performance 600-watt mono subwoofer amplifier designed to enhance your vehicle's audio system. This amplifier delivers robust bass output with minimal strain on your vehicle's electrical system, thanks to its Class D design. It features versatile input options and precise tuning controls to optimize subwoofer performance.
図1：上 view of the Infinity Reference-6001A Mono Ampライフファイア、ショーasing its compact design and Infinity logo.
2. 主な特徴
- コンパクトなデザイン: ロープロ仕様file chassis and small footprint for installation in vehicles with limited space.
- Variable Electronic Crossovers and Bass Boost: Allows for precise system tuning and optimized subwoofer performance.
- バランス差動入力: Engineered to ensure low noise and distortion, even at high output levels, and reduces susceptibility to line-induced engine noise.
- On-board Protection Circuitry: 保護する amplifier from shorts, high-temperature, overvoltage、およびアンダーボリュームtage conditions. An LED indicator signals when these conditions occur.
- RBC Wired Remote: Provides convenient volume adjustment for the subwoofer from the driver's seat.
- 高レベルおよび低レベル入力: Compatible with both aftermarket and factory car stereo systems.
3. セットアップとインストール
最適な性能と安全性を確保するには、適切な設置が不可欠です。設置は資格を持った専門家に依頼することをお勧めします。
3.1 取り付け Ampリファイアー
Select a mounting location that is dry, well-ventilated, and secure. The compact size of the Reference-6001A allows for flexible placement in various vehicles. Ensure adequate airflow around the amp過熱を防ぐためのリファイアー。
3.2配線接続
Refer to the diagram below for typical wiring connections. Always disconnect the vehicle's battery before making any power connections.
図2：背面 view の amp電源、アース、リモート、スピーカー、および RCA 入力端子を示すリファイア。
- 電源 (+12V): Connect to the positive terminal of the vehicle's battery using a fuse-protected power cable.
- グラウンド (GND): 車両シャーシの清潔で塗装されていない金属表面に接続します。
- リモート（REM）： ヘッドユニットのリモート電源オン出力に接続します。
- スピーカー出力（SUB）： Connect your subwoofer(s) to these terminals. Ensure correct polarity.
- 入力（RCAまたはスピーカーレベル）： Use RCA cables for low-level inputs from an aftermarket head unit or speaker-level inputs for factory radios.
- Remote Control (RBC): Connect the wired remote bass knob to the designated port for convenient bass level adjustment.
4. 操作方法 Ampリファイアー
インストールしたら、 amplifier settings to match your audio system and personal preferences.
4.1 ゲイン調整
Set the gain control to match the output voltagヘッドユニットのゲインを最小から始めて、歪みのない希望の音量になるまでゆっくりと上げてください。
4.2 ローパスフィルタ（LPF）
The LPF controls the upper frequency limit of the audio signal sent to the subwoofer. Adjust this to blend the subwoofer's output seamlessly with your full-range speakers.
4.3 ベースブースト
The variable bass boost allows you to increase the bass output at a specific frequency. Use this sparingly to avoid distortion and potential damage to your subwoofer.
三相スイッチ
The phase switch (0°/180°) helps ensure that the subwoofer's output is in phase with the rest of your speakers, providing a more cohesive and impactful bass response.
4.5 RBC Wired Remote
有線リモコンを使用すると、運転位置からサブウーファーの出力レベルを簡単に調整できます。
5. メンテナンス
The Infinity Reference-6001A amplifier requires minimal maintenance. Keep the unit clean and free from dust and debris. Periodically check all wiring connections to ensure they are secure and free from corrosion. Do not use harsh chemicals or abrasive cleaners.
6。 トラブルシューティング
問題が発生した場合は、 amplifier, consult the following guide before seeking professional service.
6.1 Protection LED Indicator
の amplifier features an LED indicator that illuminates when the on-board protection circuitry is activated due to shorts, high temperature, overvoltage、またはアンダーボリュームtage. If the LED is lit, check the following:
- 短絡： Inspect speaker wiring for any shorts to ground or between positive and negative terminals.
- 過熱： 確実に amplifier has adequate ventilation. Allow the unit to cool down.
- 巻tag問題: 車両のバッテリー容量を確認するtage is within the operating range (typically 11V-16V).
6.2 よくある問題
- 電源なし: Check the main fuse, power cable connection, ground connection, and remote turn-on wire.
- 音が出ない: Verify input signal connections (RCA or speaker level), speaker connections, and amplifier gain settings. Check head unit output.
- 歪んだ音: Reduce gain setting, check speaker impedance, and ensure bass boost is not set too high.
図3：下 view の amplifier, showing the model and serial number label.
7. 仕様
| 仕様 | 価値 |
|---|---|
| モデル番号 | Reference-6001A |
| 出力電力 | 600 Watts (Mono) |
| チャンネル数 | 1 |
| 巻tage | 16ボルト（最大） |
| 取り付けタイプ | 表面実装 |
| アイテム重量 | 6ポンド |
| パッケージ寸法 | 11.14 x 9.06 x 4.57インチ |
| 材料 | 半導体 |
| 仕様が満たされました | 連邦通信委員会 |
8. 保証情報
Infinity products are designed and manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship. The duration and terms of the warranty may vary by region. Please refer to the warranty card included with your product or visit the official Infinity web詳細な保証情報については、サイトをご覧ください。
9. カスタマーサポート
For technical assistance, troubleshooting, or warranty claims, please contact Infinity customer support. You can find contact information on the official Infinity webサイトまたは正規販売店を通じてご購入いただけます。
Webサイト： www.infinityspeakers.com
