AmazonBasics Shelving Storage Units User Manual

1. はじめに

Thank you for choosing AmazonBasics Shelving Storage Units. These versatile and durable units are designed to provide efficient storage solutions for various environments, including kitchens, offices, garages, and more. This manual provides detailed instructions for assembly, operation, maintenance, and troubleshooting to ensure safe and optimal use of your shelving units.

This manual covers both the 4-shelf unit with casters and the 3-shelf adjustable unit.

2. 安全情報

組み立ておよびご使用の前に、必ずすべての説明書をよくお読みください。説明書に従わない場合、怪我をしたり、製品が損傷したりする恐れがあります。

• 重量容量: Do not exceed the maximum weight capacity per shelf or total unit capacity. Refer to the 'Specifications' section for details.
• 均等配分: Distribute weight evenly across shelves to prevent tipping or collapse.
• 安定性： Ensure the unit is placed on a flat, stable surface. For units with leveling feet, adjust them to ensure stability.
• キャスター： If using casters, lock them when the unit is stationary to prevent unintended movement. Exercise caution when moving a loaded unit.
• 子供たち： Keep children away from the unit during assembly. Do not allow children to climb on or play with the shelving unit.
• 組み立て： Assemble the unit according to the instructions. Ensure all parts are securely fastened before use.
• メンテナンス： Regularly inspect the unit for loose parts or damage. Tighten fasteners as needed.

3. 部品リスト

組み立てを始める前に、すべての部品が揃っていることを確認してください。部品が不足または破損している場合は、組み立てを続行しないでください。サポートが必要な場合は、カスタマーサポートにお問い合わせください。

3.1. 4-Shelf Shelving Unit Components

Image: All components for the 4-shelf shelving unit, including wire shelves, vertical poles, casters, and plastic sleeve clips.

• ワイヤーシェルフ (4)
• Vertical Poles (4, multi-part)
• Plastic Sleeve Clips (numerous)
• ホイールキャスター (4)
• Leveling Feet (4, optional alternative to casters)

3.2. 3-Shelf Adjustable Shelving Unit Components

Image: All components for the 3-shelf shelving unit, including wire shelves, vertical poles, plastic sleeve clips, and leveling feet.

• ワイヤーシェルフ (3)
• Vertical Poles (4, multi-part)
• Plastic Sleeve Clips (numerous)
• 水平調整脚 (4)

4. セットアップと組み立て

No tools are required for assembly. It is recommended to assemble the unit with two people for easier handling, though one person can manage.

4.1. General Assembly Steps (Applicable to both units)

1. Attach Leveling Feet/Casters: Screw the leveling feet or casters into the bottom of the lower pole sections. For the 4-shelf unit, choose between casters for mobility or leveling feet for stationary use.
2. ポールの組み立て: Screw the upper pole sections into the lower pole sections. Ensure they are tightly connected.
3. Install Plastic Sleeve Clips: On each pole, locate the desired height for your first shelf. Snap two plastic sleeve clips around each pole at the same height, ensuring the arrows on the clips point upwards. These clips will create a groove for the shelf to rest on.
4. Place First Shelf: Slide a wire shelf down over the poles until it rests securely on the plastic sleeve clips. Gently press down on each corner of the shelf to ensure it is fully seated and level.
5. 残りの棚についても繰り返します。 Determine the desired height for subsequent shelves. Install plastic sleeve clips at the chosen height on all four poles, then slide the next wire shelf into place. Repeat until all shelves are installed.
6. 最終チェック: Once all shelves are in place, gently push down on each shelf to ensure it is firmly seated and stable. If using leveling feet, adjust them to eliminate any wobble.

Image: An assembled 4-shelf shelving unit with casters, ready for use.

Image: An assembled 3-shelf shelving unit with leveling feet, ready for use.

5. 操作手順

These shelving units are designed for static storage and, for the 4-shelf unit, occasional mobility.

• 読み込み中: Place items on the shelves, ensuring weight is distributed evenly. Avoid concentrating heavy items in one small area.
• 棚の高さの調整: To adjust a shelf's height, first remove all items from that shelf. Then, lift the shelf off the plastic clips. Remove the clips, reposition them at the desired height (in 1-inch increments), and then place the shelf back onto the clips.
• Moving (4-Shelf Unit with Casters): Before moving the unit, ensure all items are stable and secure. Unlock all casters. Push the unit slowly and carefully. Avoid sudden movements or pushing over uneven surfaces. Lock casters once the unit is in its new desired position.

6. メンテナンス

定期的なメンテナンスを行うと、棚ユニットの寿命が延びます。

• クリーニング： Wipe the unit with a dry cloth to remove dust and debris. For more stubborn marks, use a slightly damp cloth and mild soap, then dry thoroughly. Avoid abrasive cleaners or harsh chemicals.
• 検査： Periodically check all connections and fasteners to ensure they are tight. If any parts appear loose, tighten them.
• ダメージ： If any part of the unit becomes bent, broken, or significantly damaged, discontinue use and replace the affected components or the entire unit.

7。 トラブルシューティング

棚ユニットに問題が発生した場合は、次の一般的な問題と解決策を参照してください。

8. 仕様

9. 保証とサポート

For warranty information and customer support, please refer to the product packaging or visit the official AmazonBasics website. You can also find additional support and contact options through your Amazon purchase history.

For a digital copy of the user manual, you may refer to the PDF document available at: ユーザーマニュアル（PDF）