製品終了view
The Infinity Basslink Mini is a compact, powered 6x8 inch underseat subwoofer designed to deliver deep, accurate bass in a small footprint. It features a 100-watt amplifier and intelligent electronic design for reliable performance, even at high output levels. The durable die-cast aluminum enclosure minimizes size and eliminates rattles, ensuring clean audio reproduction. A wired bass volume remote control is included for convenient adjustment from the driver's seat.
画像: 上 view of the Infinity Basslink Mini subwoofer, showcasinコンパクトなデザインとスピーカーグリルが特徴です。
含まれるコンポーネント
- 1x Underseat Subwoofer (Infinity Basslink Mini)
- ネジ14本
- 4x Small Metal Plates (for mounting)
- 配線ハーネス x 1
- 1x Bass Volume Remote Control (with cable)
- 1Aヒューズ15個
セットアップとインストール
Proper installation is crucial for optimal performance and safety. It is recommended to have this product installed by a qualified professional. Ensure the vehicle's battery is disconnected before beginning installation.
1. 取り付け場所の選択
The Basslink Mini is designed for underseat mounting. Select a location that allows for adequate ventilation and does not obstruct vehicle controls or passenger movement. Ensure the mounting surface is stable and secure.
Image: The Infinity Basslink Mini subwoofer with its dimensions clearly marked: 14.57 inches (width), 10.04 inches (depth), and 4.65 inches (height). This illustrates its compact size for underseat installation.
2. 配線接続
Refer to the wiring diagram in the included user manual for detailed connection instructions. Key connections include:
- 電源（12V以上）: Connect directly to the vehicle's battery positive terminal via the supplied 15A fuse.
- グラウンド (GND): 車両シャーシの清潔で塗装されていない金属表面に接続します。
- リモートターンオン（REM）： Connect to the remote output of your head unit or an accessory wire that turns on with the ignition.
- オーディオ入力: Use either the high-level inputs (speaker-level) or low-level inputs (RCA) from your head unit.
- ベースリモコン: Connect the wired remote to the designated port for convenient bass level adjustment.
Image: Rear panel of the Infinity Basslink Mini, displaying the various input and control connections including power, ground, remote, high-level input, low-level RCA input, gain, bass boost, low pass filter, phase, and auto turn-on switch.
3. サブウーファーの取り付け
Once all wiring is connected, secure the subwoofer using the provided screws and metal plates. Ensure it is firmly attached to prevent movement during vehicle operation.
操作手順
1. 初期電源投入とテスト
After installation, reconnect the vehicle's battery. Turn on your car's audio system. The subwoofer should power on automatically if the remote turn-on is correctly connected or if the auto turn-on feature is active (for high-level inputs).
2. コントロールの調整
- ゲインコントロール： Adjust the gain to match the output level of your head unit. Start with the gain at minimum and slowly increase it until the bass sounds balanced with the rest of your system without distortion.
- ローパスフィルター (LPF): This control sets the upper frequency limit for the subwoofer. Adjust it to blend smoothly with your main speakers, typically between 80Hz and 120Hz.
- 低音ブースト： Use this control to enhance the bass output at a specific frequency. Use sparingly to avoid distortion.
- フェーズスイッチ: If the bass sounds weak or out of sync, try flipping the phase switch (0° or 180°). One setting will typically sound better than the other, indicating proper phase alignment with your main speakers.
- ベースリモコン: 有線リモコンを使用すると、運転位置からサブウーファーの出力レベルを簡単に調整できます。
メンテナンス
The Infinity Basslink Mini requires minimal maintenance. Keep the unit clean and free from dust and debris. Do not use harsh chemicals or abrasive cleaners. Ensure all connections remain secure over time.
トラブルシューティング
- 音が出ない:
- Check all power, ground, and remote turn-on connections.
- Verify the 15A fuse is intact.
- Ensure audio input cables (RCA or speaker-level) are securely connected.
- Confirm the head unit is powered on and sending an audio signal.
- 歪んだ音:
- サブウーファーのゲインコントロールを下げます。
- 低音ブースト設定を下げます。
- Check the audio input signal for distortion from the source unit.
- 弱い低音:
- Increase the gain control.
- Adjust the low pass filter to a higher frequency.
- Try flipping the phase switch (0°/180°).
- Ensure the bass remote control is not set to minimum.
- Subwoofer Not Turning On/Off with Ignition:
- Check the remote turn-on wire connection.
- If using high-level inputs, ensure the "Auto Turn-On" switch is enabled (if applicable).
仕様
| モデル名 | Basslink Mini |
| スピーカータイプ | サブウーファー |
| サブウーファーの直径 | 6x8インチ |
| スピーカー最大出力 | 200ワット |
| 周波数応答 | 150 Hz（上限） |
| 取り付けタイプ | シート下マウント |
| 製品寸法（奥行き×幅×高さ） | 10.04インチ x 14.57インチ x 4.65インチ |
| アイテム重量 | 9.13 ポンド (4.15 キログラム) |
| 材料 | アルミニウム |
| 色 | 黒 |
| 電源 | コード式電気 |
| 制御方法 | リモート |
| 接続技術 | 補助、有線 |
| オーディオ出力モード | ステレオ |
| 耐水性レベル | 耐水性はありません |
保証情報
The Infinity Basslink Mini comes with a full warranty. Please refer to the warranty card included in your product packaging or visit the official Infinity web保証範囲、期間、請求手続きに関する詳細な利用規約については、こちらのサイトをご覧ください。
サポート
For technical assistance, troubleshooting, or product inquiries, please contact Infinity customer support. Contact information can typically be found on the product packaging, the official Infinity website, or in the included warranty documentation.
