StarTech.com Desk Mount Dual Monitor Arm with USB & Audio

導入

This manual provides detailed instructions for the installation, operation, and maintenance of your StarTech.com Desk Mount Dual Monitor Arm (ARMSLIMDUAL2USB3). This product is designed to mount two 17-inch to 32-inch VESA compatible monitors, each weighing up to 17.6 lb (8 kg), onto a single low-profile base. It offers flexible desk-clamp or grommet-hole mounting options, optimizing desk space and promoting an ergonomic workspace.

図1: 前面 view of the StarTech.com Desk Mount Dual Monitor Arm, showing the dual VESA mounts, articulating arm, and base with USB and audio ports.

箱の中身

Carefully unpack the contents and ensure all items listed below are present and undamaged. If any parts are missing or damaged, contact StarTech.com support.

• 1 x ベースClamp 組み立て
• 1 x Lower Arm
• 1 x Upper Arm
• クロスバー x 1
• VESAマウント×2
• 1×グラブハンドル
• 1 x Grommet Plate
• ベースプレート1枚
• 1 x Adhesive Foam Pad
• 1 x Cable Management Clip, Base
• 4 x Button Head Hex Screws
• 2 x Flat Head Hex Screws
• 1 x 3mm Hex Key
• 1 x 4mm Hex Key
• 1 x 6mm Hex Key
• M8 x 4 ネジ 12 本
• M8 x 5 ネジ 12 本
• ワッシャー x 8
• 4 x Countersunk Hex Screws
• 1 x Grommet Screw
• 1 x Upper C Clamp ブラケット
• 1 x Lower C Clamp 組み立て

セットアップとインストール

モニターアームには2つの取り付け方法があります: C-clamp or grommet mount. Choose the method that best suits your desk setup.

C-Clamp インストール

1. ベースClを取り付けるamp Assembly to the edge of your desk (10 mm-85 mm thickness). Ensure it is securely tightened.
2. Insert the Lower Arm into the base.
3. Connect the Upper Arm to the Lower Arm.
4. Attach the Cross Bar to the Upper Arm.
5. Secure the VESA Mounts to your monitors using the provided M4 or M5 screws and washers.
6. Slide the VESA mounted monitors onto the Cross Bar.
7. Attach the Grab Handle to the designated slot on the arm.
8. Route cables through the integrated cable management clips.

グロメットマウントの取り付け

1. C-clを分解するamp components from the base if they are pre-attached.
2. Attach the Grommet Plate and Base Plate to the bottom of the base, securing with the Grommet Screw.
3. Insert the base through an existing grommet hole in your desk.
4. Secure the base from underneath the desk using the appropriate hardware.
5. Follow steps 2-7 from the C-Clamp Installation for assembling the arm, crossbar, and attaching monitors.

図2：側面 view illustrating the articulating arm and the C-clamp mounting mechanism on a desk.

図3：背面 view showing the VESA mounting plates and the horizontal crossbar for monitor attachment.

操作手順

The monitor arm provides a wide range of motion for optimal view人間工学に基づいた快適さ。

モニター調整

• 高さ調整: Use the spring-assisted arm and the sturdy handle to adjust the monitor height up to a maximum of 23.4 inches from the desk. The toolless adjustable height range is 13 inches.
• Each monitor can be tilted +/- 10 degrees to reduce glare and achieve a comfortable view角度。
• スイベル: The arm allows for +/- 90 degrees of swivel motion, enabling easy screen sharing or repositioning.
• 回転： Rotate each display 180 degrees for portrait or landscape viewing。
• 水平方向の配置: The sliding horizontal crossbar allows for precise alignment of your two monitors.

統合された接続性

The base of the monitor arm includes convenient pass-through ports:

• 2 x USB 3.0 (USB-A 3.1 Gen 1 5Gbps) Ports: Connect your USB peripherals directly to the monitor arm, extending the ports from your PC or laptop.
• 2 x 3.5mm Audio/Mic Jacks: Easily connect headphones, speakers, or a microphone.

Ensure the USB and audio cables from the monitor arm's base are connected to the corresponding ports on your computer for these features to function.

メンテナンス

To ensure the longevity and optimal performance of your monitor arm, follow these simple maintenance guidelines:

• クリーニング： Wipe the surface of the monitor arm with a soft, dry cloth. For stubborn marks, a slightly damp 中性洗剤を含ませた布で拭き、乾燥させてください。研磨剤入りの洗剤や溶剤の使用は避けてください。
• 定期点検: すべてのネジと接続部がしっかりと固定されているか定期的に点検してください。必要に応じて締め直してください。
• ケーブル管理 Ensure cables are neatly routed through the integrated cable management system to prevent strain or damage.

トラブルシューティング

This section addresses common issues you might encounter with the monitor arm.

• モニターが水平でない: If your monitors appear uneven, ensure they are properly seated on the VESA mounts and that the horizontal crossbar is adjusted correctly. Slight adjustments to the individual VESA mounts or the crossbar's position may be needed.
• 腕が位置を保持しない: If the arm sags or does not stay at the desired height, the tension may need adjustment. Use the provided hex keys to adjust the articulation tension as per the instructions in the assembly guide.
• Limited Monitor Angle/Curve Alignment: For curved monitors, the maximum tilt and swivel angles of the VESA mounts might limit how closely the curves can align. Experiment with the sliding crossbar and individual monitor angles to find the best possible alignment.
• USB/Audio Ports Not Functioning: Verify that the USB and audio cables extending from the monitor arm's base are securely connected to the corresponding ports on your computer. Ensure your computer's drivers are up to date.

仕様

保証とサポート

The StarTech.com Desk Mount Dual Monitor Arm (ARMSLIMDUAL2USB3) is backed by a 2-year StarTech.com warranty.

StarTech.com conducts thorough compatibility and performance testing on all products to ensure they meet or exceed industry standards. For technical assistance, free lifetime technical support is available. Please visit the official StarTech.com web連絡先情報と追加のサポート リソースについては、サイトをご覧ください。