導入
This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your Oregon CS1200 1800W electric chainsaw. Designed for light to moderate cutting tasks, this wired chainsaw features a 35cm guide bar, automatic lubrication, and tool-free chain tensioning for user convenience. Please read this manual thoroughly before initial use and keep it for future reference.
安全情報
Operating a chainsaw can be dangerous if proper safety precautions are not followed. Always wear appropriate personal protective equipment (PPE) including safety glasses, hearing protection, gloves, and sturdy footwear. Ensure the work area is clear of bystanders and obstacles. Never operate the chainsaw in wet conditions or near flammable liquids. Always maintain a firm grip with both hands and be aware of kickback potential. The Oregon CS1200 is equipped with a low kickback chain and a chain brake for enhanced safety.
- Always inspect the chainsaw before each use for any damage or loose parts.
- チェーンブレーキが機能していることを確認します。
- Keep hands and feet away from the chain.
- メンテナンスや調整を行う前に電源を切ってください。
- 手を伸ばしすぎたり、肩の高さより上に切ったりしないでください。
コンポーネントオーバーview
Familiarize yourself with the main components of your Oregon CS1200 electric chainsaw:
- モーターハウジング： 1800Wの電気モーターを搭載しています。
- フロントハンドル: 安定した両手操作を実現。
- リアハンドル: With trigger switch and safety lock-off button.
- チェーンブレーキ/ハンドガード: Protects hands and stops the chain in case of kickback.
- ガイドバー： 35 cm (14 inch) length, guides the saw chain.
- ソーチェーン： Oregon 91PJ low kickback chain.
- オイルタンクキャップ: チェーン潤滑油の充填用。
- オイルレベルインジケーター: Transparent window to check oil level.
- 工具不要のチェーンテンショニングノブ: 工具を使わずにチェーンの張りを調整します。
設定
1. チェーンとガイドバーの取り付け
The Oregon CS1200 is designed for easy assembly. Follow the instructions provided in the packaging for mounting the guide bar and chain. Ensure the chain is correctly seated in the guide bar groove and the drive sprocket.
2. Filling Chain Lubricant
The chainsaw features an automatic lubrication system. Before each use, ensure the oil tank is filled with appropriate chain lubricant. Use only high-quality chain oil to ensure proper lubrication and extend chain life.
- オイルタンクのキャップを外します。
- Carefully pour chain lubricant into the tank until it reaches the MAX level on the indicator.
- キャップは確実に取り付けてください。
- Periodically check the oil level during operation using the transparent indicator.
3. チェーンの張り調整
Correct chain tension is crucial for safe and efficient operation. The CS1200 features a tool-free tensioning system.
- チェーンソーのプラグが抜かれていることを確認してください。
- Loosen the large red outer knob on the side cover.
- Turn the smaller red inner knob clockwise to increase tension, or counter-clockwise to decrease tension.
- The chain is correctly tensioned when it can be pulled away from the guide bar by about 2-3 mm at the center, but still snaps back into place.
- Tighten the large red outer knob securely.
操作手順
1. チェーンソーの始動
- チェーンブレーキが解除されている（フロントハンドルの方向に引かれている）ことを確認します。
- Connect the chainsaw to a suitable power outlet (230V).
- 左手で前方のハンドルを握り、右手で後方のハンドルを握ります。
- Press the safety lock-off button with your thumb, then squeeze the trigger switch. The chain will start moving.
2. カット技術
Always plan your cut before starting. Ensure stable footing and a clear escape path. When cutting, let the chainsaw do the work; do not force it. Apply light pressure and allow the chain to cut through the material. Be mindful of pinching and kickback.
3. チェーンソーの停止
Release the trigger switch. The chain will stop quickly due to the integrated chain brake. For complete power disconnection, unplug the chainsaw from the power outlet.
メンテナンス
定期的なメンテナンスにより、チェーンソーの寿命が長くなり、安全に操作できるようになります。
- チェーンの潤滑: The automatic system requires regular refilling of the oil tank. Always use Oregon chain oil or equivalent.
- チェーン研磨: A sharp chain is essential for efficient cutting and safety. Sharpen the chain regularly or replace it when dull. Refer to Oregon's guidelines for sharpening the 91PJ chain.
- Chain and Guide Bar Inspection: Regularly check the chain for damage, wear, and proper tension. Inspect the guide bar for wear, especially on the rails.
- クリーニング： After each use, clean sawdust and debris from the motor housing, guide bar, and chain. Ensure cooling vents are clear.
- ストレージ： Store the chainsaw in a dry, secure place, out of reach of children. Ensure the chain brake is engaged and the power cord is safely stored.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| チェーンソーが始動しません。 | No power supply; chain brake engaged; safety lock-off not pressed. | Check power connection; disengage chain brake; ensure safety lock-off is pressed before trigger. |
| チェーンが動かない。 | Chain brake engaged; chain too tight; chain jammed. | Disengage chain brake; adjust chain tension; clear any obstructions. |
| 切削性能が悪い。 | 鈍いチェーン、不適切なチェーンの張り、不十分な潤滑。 | Sharpen or replace chain; adjust chain tension; refill oil tank. |
| 切断中に煙が多量に発生します。 | Dull chain; insufficient lubrication; cutting green wood. | Sharpen or replace chain; refill oil tank; ensure proper lubrication. |
仕様
- モデル： CS1200
- 力： 1800ワット
- 巻tage: 230ボルト
- ガイドバーの長さ: 35 cm (14 インチ)
- チェーンタイプ: Oregon 91PJ (low kickback)
- チェーン速度： 毎秒14メートル
- 重さ： 4.5キログラム
- 自動潤滑: はい
- 工具不要のチェーン張力調整: はい
- 安全機能: Chain brake, hand guard, low kickback chain
- メーカー: Oregon Tool
保証とサポート
The Oregon CS1200 electric chainsaw comes with a 3年間保証. For warranty claims, technical support, or spare parts, please contact Oregon customer service or your authorized dealer. Keep your proof of purchase for warranty validation.
For further assistance, visit the official Oregon website or consult your local Oregon service center.
