BFT ゲートオープナー P125002 SB-BAT 24V DC バッテリーバックアップキット ユーザーマニュアル

1.製品オーバーview

The BFT SB-BAT (P125002) is a 24v DC battery backup system designed to ensure continuous operation of your gate opener even during power outages. This kit provides a reliable power source, activating automatically when the main power supply is interrupted and recharging when power is restored.

It is compatible with various BFT gate opener models, including the Deimos BT series, VIRGO - LINX, EOS-SCE, HYDRA N, DEIMOS BT-QSC D-NETTUNO S, SB BAT/SB CARBAT (DEIMOS BT-SB 300), BT BAT 2 (URANO BT ARES 1000 & ARES 1500) NETTUNO B, VENERE D, ARGO, LIBRA C MA - LIBRA C LX.

Figure 1: Contents of the BFT P125002 SB-BAT Battery Backup Kit, including batteries, wiring, and mounting hardware.

2. セットアップとインストール

Installation of the BFT SB-BAT kit is designed to be straightforward. It integrates with your existing BFT gate opener system.

2.1. 安全上の注意

• Ensure the main power to the gate opener is disconnected before beginning installation.
• 適切な個人用保護具（PPE）を着用してください。
• Refer to your specific gate opener's manual for compatibility and connection points.

2.2. インストール手順

1. コンポーネントを解凍します: Carefully remove all items from the packaging. Verify all components are present as shown in Figure 1.
2. Mount the Battery Housing: Securely mount the battery housing unit near your gate opener's control board, ensuring it is protected from environmental elements.
3. バッテリーを接続する: Insert the two 12V 1.2Ah batteries into the housing. Connect them according to the wiring diagram provided with the kit (typically in series to achieve 24V DC).
4. Connect to Gate Opener: Connect the battery backup system's wiring to the designated battery input terminals on your BFT gate opener's control board. Consult your gate opener's manual for precise terminal locations.
5. 安全な配線: Ensure all wiring is neatly routed and secured to prevent accidental disconnections or damage.
6. 電力を回復する： Once all connections are secure and verified, restore main power to the gate opener. The smart charger board will begin charging the batteries.

図2: 拡大図 view of the battery backup kit components, highlighting the batteries and connection wires.

3. 操作

The BFT SB-BAT battery backup system operates automatically to provide uninterrupted gate functionality.

• 通常操作: When main power is available, the smart charger board continuously charges and maintains the batteries.
• パワーオウtage: 停電の場合tage, the system automatically switches to battery power, allowing the gate opener to continue functioning normally.
• 電力の回復: Once main power is restored, the system automatically switches back to main power and resumes charging the batteries.

4. メンテナンス

定期的なメンテナンスにより、バッテリー バックアップ システムの寿命と信頼性が確保されます。

• 目視検査: Periodically inspect the batteries and wiring for any signs of damage, corrosion, or loose connections.
• 清潔さ: Keep the battery housing and terminals clean and free of dust or debris.
• バッテリーの状態チェック: While the system has an intelligent charger, it is advisable to periodically test the battery backup by temporarily disconnecting main power to ensure the gate operates on battery power. Reconnect main power after testing.
• バッテリー交換: Batteries have a finite lifespan. If you notice a significant decrease in backup operation time, it may be time to replace the batteries. Use only recommended replacement batteries (2x 12V 1.2Ah).

5。 トラブルシューティング

This section addresses common issues you might encounter with your BFT SB-BAT battery backup kit.

6. 仕様

Key technical specifications for the BFT SB-BAT (P125002) battery backup system:

• モデル： P125002 SB-BAT
• システム巻tage: 24V直流
• チャージVoltage: 27.2V
• 充電電流: 130mA
• バッテリー容量: 2個（12V 1.2Ah）
• Exhausted Battery Protection Threshold: 20.4V
• バッテリー充電時間: 12～14時間
• ヒューズ： 20A
• メーカー: ビーエフティー

7. 保証とサポート

For warranty information or technical support, please refer to the documentation included with your purchase or contact BFT customer service directly. Keep your proof of purchase for warranty claims.

You can find more information about BFT products on their official webサイトまたは正規販売代理店を通じて購入できます。