TC Electronic Flashback 2 ミニディレイペダル ユーザーマニュアル

1. はじめに

The TC Electronic Flashback 2 Mini Delay is a compact and powerful delay pedal designed for guitarists. It features next-generation delay algorithms, the innovative MASH footswitch for expressive control, and TonePrint technology for custom sound creation. This manual provides essential information for setting up, operating, and maintaining your Flashback 2 Mini Delay pedal.

2. 重要な安全上の注意事項

• デバイスを操作する前に、これらの手順をよくお読みください。
• 今後の参照用にこれらの手順を保管してください。
• すべての警告に注意し、すべての指示に従ってください。
• この装置を水の近くで使用しないでください。
• 乾いた布でのみ清掃してください。
• 通気口を塞がないでください。メーカーの指示に従って設置してください。
• ラジエーター、暖房レジスター、ストーブ、その他の機器（以下を含む）などの熱源の近くに設置しないでください。 amp熱を発生する装置。
• メーカー指定のアタッチメント/アクセサリのみを使用してください。
• すべてのサービスを資格のあるサービス担当者に依頼してください。 装置が何らかの形で損傷した場合は、修理が必要です。

3. パッケージ内容

パッケージに以下の項目が含まれているか確認してください。

• TC Electronic Flashback 2 Mini Delay Pedal
• ユーザーマニュアル（このドキュメント）
• TC Electronic sticker

Note: A 9V DC power supply (not included) is required for operation.

4.コントロールとコネクタ

図1: 前面 view of the Flashback 2 Mini Delay pedal, showing the three control knobs and the MASH footswitch.

4.1 トップパネルのコントロール

• DELAYノブ: Controls the delay time, from short slap-back echoes to long, ambient repeats.
• F.BACKノブ: Adjusts the number of repeats (feedback) for the delay effect. Turn clockwise for more repeats, counter-clockwise for fewer.
• レベルノブ: Sets the mix level of the delayed signal relative to the dry signal.
• MASH Footswitch: This multi-functional footswitch acts as an on/off switch with a single tap. Pressing and holding the footswitch engages the MASH expression control, allowing you to dynamically control various delay parameters depending on the selected TonePrint.

図2: 角度付き view of the Flashback 2 Mini Delay pedal, highlighting the input, output, and power connections.

4.2 Side Panel Connectors

• 入力ジャック： Connect your guitar or the output of another pedal here using a standard 1/4-inch instrument cable.
• 出力ジャック： これをあなたの amp標準の 1/4 インチ楽器ケーブルを使用して、信号チェーン内の次のペダルの入力またはリファイアに接続します。
• 9V DC電源入力: Connect a standard 9V DC, center-negative power supply (not included) here.
• USBポート: Used for connecting the pedal to a computer for TonePrint editing and firmware updates.

5. セットアップ

Follow these steps to connect your Flashback 2 Mini Delay pedal:

1. あなたの amplifier is turned off or its volume is set to zero.
2. Connect your guitar (or the output of a preceding pedal) to the 入力 jack of the Flashback 2 Mini using a 1/4-inch instrument cable.
3. 接続する 出力 jack of the Flashback 2 Mini to your amplifier (or the input of a subsequent pedal) using another 1/4-inch instrument cable.
4. Connect a 9V DC, center-negative power supply (not included) to the 9VDC電源入力.
5. すべての接続が安全になったら、電源を入れます。 ampライザーを使用してペダルの使用を開始します。

6. Operating the Flashback 2 Mini

6.1 基本操作

To activate the delay effect, simply tap the MASH footswitch. The LED indicator will illuminate. Tap it again to bypass the effect. Adjust the DELAY, F.BACK, and LEVEL knobs to shape your desired delay sound.

6.2 MASH Footswitch Functionality

The MASH footswitch offers pressure-sensitive expression control. While the effect is active, press and hold the footswitch with varying pressure to dynamically control a specific parameter of the delay. The parameter controlled by MASH is determined by the selected TonePrint. For example, MASH can control delay time, feedback, modulation, or other effects.

6.3 TonePrint Feature

TonePrint allows you to load custom delay sounds created by TC Electronic and famous artists, or design your own using the free TonePrint Editor software. To load a TonePrint:

• Download the free TC Electronic TonePrint App for your smartphone or the TonePrint Editor for your computer.
• Using the app, select a TonePrint and 'beam' it to your pedal by holding your phone's speaker near your guitar pickup.
• Alternatively, connect the pedal to your computer via the USB port and use the TonePrint Editor software to load or create custom sounds.

6.4 Delay Algorithms

The Flashback 2 Mini features a range of high-quality delay algorithms, including new Tape and Analog algorithms for classic delay tones, and Crystal Delay algorithms based on the Sub'n'Up Octaver for unique, shimmering effects.

6.5 Bypass Modes (True Bypass / Buffered Bypass)

The pedal offers switchable bypass modes: True Bypass and Buffered Bypass. True Bypass ensures that your signal remains completely unaltered when the pedal is off, while Buffered Bypass provides a strong, clean signal over long cable runs. The bypass mode can typically be switched via an internal dip switch or through the TonePrint Editor software. Refer to the TonePrint Editor documentation for specific instructions on changing the bypass mode.

7. メンテナンス

• ペダルは柔らかく乾いた布で拭いて清潔に保ってください。研磨剤入りの洗剤や溶剤の使用は避けてください。
• ペダルは、極端な温度や湿度を避け、乾燥した環境に保管してください。
• Ensure all cables are securely connected during use and disconnected when not in use to prevent accidental damage.

8。 トラブルシューティング

• 音が出ない: Check all cable connections. Ensure the power supply is correctly connected and functioning. Verify that your ampライターがオンになっていて、音量も上がっています。
• 音が弱い、または歪んでいる: Check cable integrity. Ensure the power supply provides the correct voltage (9V DC) and polarity (center-negative). Adjust the LEVEL knob on the pedal.
• ペダルが作動しない: Confirm the power supply is connected and working. Try a different power outlet or power supply.
• MASH Footswitch Not Responding: Ensure the pedal is powered on and the effect is active. If using a custom TonePrint, verify that MASH control is assigned to a parameter within the TonePrint Editor.
• TonePrint Transfer Issues: Ensure your smartphone speaker is placed directly over your guitar pickup for beaming. For USB connection, ensure the correct drivers are installed and the TonePrint Editor software is up to date.

9. 仕様

10. 保証とサポート

TC Electronic products are designed for reliability and performance. For detailed warranty information, please refer to the warranty card included with your product or visit the official TC Electronic website. For technical support, firmware updates, or to access the TonePrint Editor, please visit the TC Electronic support page online.

You can find additional resources and contact information at: www.tcelectronic.com