導入
The Weiser Elements Square Single Cylinder Deadbolt is designed for use on exterior doors where key and security are required. This deadbolt can be locked or unlocked by a key on the outside or by the thumbturn on the inside. It features SmartKey re-key technology, allowing you to re-key the lock quickly and easily. This product is ANSI/BHMA Grade 3 certified, includes an adjustable latch for standard door preparations, and has a 1-inch deadbolt throw. Its universal door handling fits both right and left-handed doors, and it is ADA Compliant. It fits door thicknesses from 1 3/8" to 1 3/4" and comes in a Matte Black finish.
パッケージ内容
インストールを開始する前に、すべてのコンポーネントが揃っていることを確認してください。
- Exterior Deadbolt Assembly (with key cylinder)
- Interior Deadbolt Assembly (with thumbturn)
- デッドボルトラッチ
- ストライクプレート
- 取り付けネジ
- キー x 2
- SmartKey キー再生成ツール
Image showing the exterior and interior components of the Weiser Elements Square Single Cylinder Deadbolt, including the key cylinder and thumbturn.
セットアップとインストール
This section provides step-by-step instructions for installing your Weiser Elements Square Single Cylinder Deadbolt. Ensure you have the necessary tools before starting.
必要なツール
- プラスドライバー
- 巻尺
- 鉛筆
ドアの準備
- Ensure your door thickness is between 1 3/8" (35mm) and 1 3/4" (44mm).
- Verify the backset measurement (distance from door edge to center of bore hole) is either 2-3/8" (60mm) or 2-3/4" (70mm). Adjust the latch if necessary.
ラッチの取り付け
- Insert the latch into the door edge, ensuring the bolt faces the correct direction for your door swing. The word "TOP" on the latch should face upwards.
- 付属のネジでラッチを固定します。
外装アセンブリの取り付け
- Align the exterior deadbolt assembly with the bore hole, ensuring the tailpiece passes through the latch mechanism.
- 外部アセンブリをドアにぴったりと沿わせて配置します。
Image showing the exterior side of the deadbolt with the keyhole and Weiser branding, ready for installation.
内装アセンブリの取り付け
- Place the interior mounting plate over the tailpiece and secure it to the exterior assembly with the provided screws.
- Attach the interior thumbturn assembly to the mounting plate, ensuring the thumbturn engages with the tailpiece.
Image showing the interior side of the deadbolt with the thumbturn lever, which controls the lock from inside.
ストライクプレートの取り付け
- Align the strike plate with the latch bolt on the door frame. Mark and chisel out the area for the strike plate if necessary to ensure a flush fit.
- Secure the strike plate with the provided screws. Test the deadbolt operation to ensure smooth locking and unlocking.
操作手順
デッドボルトの施錠
- 外観から： Insert the key into the keyway and turn it clockwise until the bolt extends fully into the strike plate. Remove the key.
- 内部から： Rotate the thumbturn lever clockwise until the bolt extends fully into the strike plate.
デッドボルトの解錠
- 外観から： Insert the key into the keyway and turn it counter-clockwise until the bolt retracts fully. Remove the key.
- 内部から： Rotate the thumbturn lever counter-clockwise until the bolt retracts fully.
SmartKey鍵交換テクノロジー
The SmartKey re-key technology allows you to re-key the lock quickly and easily by yourself. This feature is useful if you have recently moved, lost keys, or wish to use one key for multiple Weiser SmartKey locks.
- 機能キーを挿入し、時計回りに 90 度回します。
- SmartKey ツールを SmartKey の穴に完全にしっかりと挿入します。
- SmartKey ツールと機能キーを取り外します。
- Insert your new key fully and firmly into the keyway.
- Turn the new key 180 degrees counter-clockwise. Your lock is now re-keyed.
Diagram showing the steps for using SmartKey technology to re-key the deadbolt, including where to insert the reset tool and the key.
メンテナンス
- Clean the lock periodically with a soft, damp 布で拭いてください。研磨剤入りの洗剤、溶剤、または刺激の強い化学薬品は、仕上げを傷める可能性があるため、使用しないでください。
- Do not lubricate the cylinder with oil-based lubricants. If lubrication is necessary, use a graphite-based lubricant sparingly.
- Periodically check and tighten all mounting screws to ensure the deadbolt remains securely installed and operates smoothly.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| キーがスムーズに回らない、または固くなってしまう。 | Dirt or debris in the keyway; worn or bent key. | Clean keyway with compressed air. Try a new, undamaged key if available. Apply graphite lubricant sparingly if needed. |
| デッドボルトが完全に伸縮しません。 | Misalignment of strike plate or latch; loose mounting screws; door frame obstruction. | Check alignment of strike plate and adjust if necessary. Ensure the latch is properly installed. Tighten all mounting screws. Clear any obstructions in the door frame. |
| SmartKey re-keying fails or new key does not work. | SmartKey tool not inserted fully or correctly; incorrect key rotation during re-keying process. | Ensure the SmartKey tool is inserted firmly and completely. Follow the re-keying steps precisely, paying attention to key rotation angles. Repeat the process carefully. |
仕様
- ブランド： ワイザー
- モデル名: Elements Square Deadbolt with SmartKey, Matte Black
- 部品番号: 9GDC94710-063
- 仕上げる： マットブラック
- 材料： 金属
- ロックタイプ: キーロック（シングルシリンダー）
- ドア厚の互換性: 1 3/8インチ（35mm）～1 3/4インチ（44mm）
- 認証： ANSI/BHMAグレード3認定
- 特別な機能: SmartKey Technology, Universal Fitment (reversible for right/left-handed doors), ADA Compliant, Limited Lifetime Warranty
- 商品の寸法 (長さ x 幅 x 高さ): 4.52 x 4.52 x 9.05インチ（おおよそのパッケージ寸法）
- 商品の重量: 1.4ポンド
保証情報
The Weiser Elements Square Single Cylinder Deadbolt is backed by a Limited Lifetime Warranty. This warranty covers mechanical and finish defects under normal use. For complete details regarding warranty coverage, terms, and conditions, please refer to the official Weiser website or contact their customer support department directly.
カスタマーサポート
For further assistance, technical support, or to inquire about replacement parts for your Weiser Elements Square Single Cylinder Deadbolt, please utilize the following resources:
- 正式 Webサイト： 訪問 www.weiserlock.com for product information, FAQs, and support documentation.
- 連絡先： ワイザーを参照 website for regional customer service phone numbers and email contact options.