VirtuFit Exercise Bike Pedals 14mm Instruction Manual

1. はじめに

Thank you for choosing VirtuFit Exercise Bike Pedals. These pedals are designed to provide a secure and comfortable experience for your indoor cycling workouts. This manual provides essential information for the proper installation, use, and maintenance of your new pedals.

インストールおよび使用前にこのマニュアルをよくお読みください。今後の参考のために保管してください。

2.製品オーバーview

The VirtuFit Exercise Bike Pedals are specifically designed for indoor fitness equipment with a 14mm connector. They feature an extra-large, anti-slip surface and adjustable foot straps to ensure enhanced support and stability during your workouts.

Figure 1: A single VirtuFit exercise bike pedal, black in color, featuring an anti-slip surface and an adjustable foot strap for secure foot placement during exercise.

3. セットアップとインストール

These pedals are designed for easy replacement of existing pedals on exercise bikes with a 14mm pedal thread. Ensure your exercise bike has a 14mm pedal connector before proceeding.

3.1 必要なツール

• Adjustable wrench or pedal wrench (typically 15mm)

3.2 Removing Old Pedals

1. Identify the left (L) and right (R) pedals. Pedal threads are typically marked. The left pedal usually has a left-hand (reverse) thread, and the right pedal has a right-hand (standard) thread.
2. 削除するには 右ペダル, turn the wrench 反時計回り.
3. 削除するには 左ペダル, turn the wrench 時計回り (reverse thread).
4. Carefully unscrew both pedals from the crank arms.

3.3 Installing New VirtuFit Pedals

図2: 詳細な view of the 14mm screw thread located at the base of the VirtuFit exercise bike pedal, essential for attachment to the bike crank arm.

1. Identify the new VirtuFit left (L) and right (R) pedals. They are typically marked on the spindle.
2. Apply a small amount of grease to the pedal threads to prevent seizing and make future removal easier.
3. については 右ペダル, carefully screw it into the right crank arm by turning 時計回り. Start by hand to ensure the threads are properly aligned.
4. については 左ペダル, carefully screw it into the left crank arm by turning 反時計回り (reverse thread). Start by hand to ensure the threads are properly aligned.
5. Once hand-tight, use your wrench to firmly tighten both pedals. Do not overtighten, but ensure they are secure to prevent loosening during use.

4. 操作と使用

The VirtuFit Exercise Bike Pedals are designed for comfortable and secure use during your indoor cycling sessions.

4.1 Adjusting Foot Straps

Figure 3: A close-up showing the textured, anti-slip surface of the VirtuFit pedal and the attachment point for the adjustable foot strap, designed to keep feet secure.

Figure 4: The adjustable foot strap component, designed to secure the user's foot firmly onto the pedal during exercise, preventing slippage.

• Place your foot onto the pedal, ensuring the ball of your foot is centered over the pedal spindle.
• Adjust the foot strap to a snug fit around your foot. The strap should be tight enough to hold your foot securely without causing discomfort or restricting circulation.
• Ensure both straps are adjusted evenly for balanced support.

4.2 安全上の注意

• Always wear appropriate athletic footwear when using the exercise bike.
• Before each workout, check that the pedals are securely attached and the foot straps are properly adjusted.
• Do not use the exercise bike if the pedals feel loose or damaged.

5. メンテナンス

Regular maintenance ensures the longevity and safe operation of your VirtuFit pedals.

• クリーニング： Wipe the pedals and straps with a damp cloth after each use to remove sweat and dirt. Avoid harsh chemicals.
• 検査： Periodically check the pedal threads for any signs of wear or damage. Inspect the foot straps for cracks, tears, or excessive stretching.
• 締め付け感: Re-check the tightness of the pedals on the crank arms every few months or if you notice any wobbling.
• 潤滑: If you ever remove the pedals, reapply a small amount of grease to the threads before reinstallation.

6。 トラブルシューティング

• ペダルが緩い感じ： Ensure the pedals are fully tightened onto the crank arms. If they continue to loosen, remove, clean, re-grease the threads, and re-install.
• Difficulty installing pedals: Verify that you are screwing the left pedal counter-clockwise and the right pedal clockwise. Ensure the threads are not cross-threaded.
• Foot slips during workout: Adjust the foot straps to be tighter and ensure they are securely fastened.

7. 仕様

8. 保証情報

The VirtuFit fitness brand guarantees excellent quality. Fitness equipment and fitness items are manufactured from high-quality materials, with significant attention paid to ease of use, design, and extensive functionality. Therefore, you benefit from a 2-year warranty on these pedals.

保証請求のために購入証明書を保管してください。