1. はじめに
This instruction manual provides essential information for the proper installation, operation, and maintenance of your MAX MXSA001 315MHz Tire Pressure Monitoring System (TPMS) sensors. These sensors are designed as direct replacements for various Toyota models, ensuring accurate tire pressure monitoring for enhanced safety and vehicle performance. Please read this manual thoroughly before installation and retain it for future reference.
2. 安全情報
- 専門家による取り付けを推奨: Installation of TPMS sensors requires specialized tools and knowledge. It is highly recommended that these sensors be installed by a qualified technician.
- Correct Torque: Ensure valve stem nuts are tightened to the specified torque (4 Nm or 35 in-lbs) to prevent air leaks and sensor damage.
- タイヤの取り付け: Exercise caution during tire mounting and demounting to avoid damaging the sensor.
- 互換性: Verify that the sensors are compatible with your vehicle's make, model, and year before installation. Refer to the replacement OEM part numbers provided.
- バッテリー寿命: TPMS sensors contain non-replaceable batteries. The typical lifespan is 5-7 years, depending on usage.
3. パッケージ内容
各パッケージには以下が含まれます。
- 4 x MAX MXSA001 315MHz TPMS Sensors
- 4 x Silver Aluminum Valve Stems (pre-attached to sensors)
図3.1：以上view of four MAX MXSA001 TPMS sensors.
4. セットアップとインストール
Proper installation is crucial for the correct functioning of the TPMS. It is strongly recommended that installation be performed by a certified automotive technician.
4.1インストール前のチェック
- Confirm that the MXSA001 sensors are the correct replacement for your vehicle's OEM part numbers (e.g., 4260733021, 4260706011, 4260733011, 426070C020, 426070C010, 42607AD020, 4260704010).
- Inspect each sensor for any visible damage before installation.
4.2 センサーの取り付け
- タイヤをホイールから外します。
- Carefully remove the old TPMS sensor and valve stem.
- Insert the new MAX MXSA001 sensor's valve stem through the valve hole from the inside of the rim.
- Secure the valve stem nut from the outside, tightening it to 4 Nm (35 インチポンド). 締めすぎないでください。
- Ensure the sensor body is properly seated and does not interfere with the tire bead during mounting.
- Mount the tire back onto the wheel, taking care not to damage the sensor.
- Inflate the tire to the manufacturer's recommended pressure.
Figure 4.2.1: Close-up of a single MXSA001 sensor.
図4.2.2：側面 view of the sensor and valve stem.
4.3 TPMS再学習手順
After installing new TPMS sensors, your vehicle's TPMS control module must be reprogrammed or
関連文書 - MXSA001
 |
MAX Sensor TPMS インストールガイドと保証情報 (GEN 5) MAX Sensor TPMSセンサー（モデルMX005A GEN 5、MX005R GEN 5）の詳細な取り付け手順（プログラミング、取り付け、空気入れ、保証の詳細を含む）が記載されています。FCC準拠。 |
 |
MAX SENSOR MX-51 TPMS Diagnostic Tool User Manual and Overview Comprehensive guide to the MAX SENSOR MX-51, a TPMS diagnostic tool for testing, programming, and relearning tire pressure monitoring systems. Includes setup, operation, and troubleshooting. |
 |
MAX Sensor MXBLE02 TPMS Sensor Installation and Warranty Guide Comprehensive guide for installing the MAX Sensor MXBLE02 TPMS sensor, including important safety precautions, warranty information, and FCC compliance details. |
 |
MAX Sensor TPMS Installation and Warranty Guide This guide provides instructions for installing MAX Sensor TPMS units (models MX005A, MX005R GEN 5A), covering component identification, step-by-step installation, warranty details, and FCC compliance information. |
 |
自動インジェクター ユーザーマニュアル - YZHIDIANF テクニカルサポートおよび保証情報 YZHIDIANFオートインジェクターの公式ユーザーマニュアル。テクニカルサポートサービス、保証情報、連絡先情報などの詳細が記載されています。2年間の保証、無償交換、福利厚生プランなどの特典も付いています。 |
 |
TST 507 Series Wireless TPMS Installation Manual Installation guide for the TST 507 Series Wireless Tire Pressure and Temperature Monitoring System (TPMS). Covers setup, sensor programming, display configuration, alerts, troubleshooting, and specifications for vehicles and trailers. |