1. はじめに
This manual provides detailed instructions for the proper installation and maintenance of the DENALI Horn Mount, Model HMT.07.10800. This mount is specifically designed for BMW F850GS and F750GS motorcycles manufactured between 2019 and 2022. Please read all instructions carefully before beginning the installation process to ensure correct fitment and safe operation.
Note: This mount is not compatible with the BMW F850GS Adventure model.
2. 安全情報
- Always ensure the motorcycle is turned off and the ignition key is removed before starting any installation.
- Disconnect the motorcycle's battery to prevent electrical shorts or damage during installation.
- 手袋や目の保護具など、適切な個人用保護具を着用してください。
- If you are unsure about any step of the installation, consult a qualified motorcycle technician.
- Ensure all fasteners are tightened to the manufacturer's recommended torque specifications. Overtightening or undertightening can lead to component failure.
3. パッケージ内容
インストールを開始する前に、すべてのコンポーネントが揃っていることを確認してください。
- DENALI SoundBomb Compact Horn Mounting Bracket
- Associated mounting hardware (bolts, washers, nuts)
Image: The DENALI horn mount bracket, a black L-shaped metal component with a mounting hole.
4.必要なツール
インストールには通常、次のツールが必要です。
- Metric Hex Key Set
- メトリックレンチセット
- トルクレンチ（適切なファスナーの締め付けに推奨）
- Blue Threadlocker (optional, for added security on fasteners)
5. セットアップとインストール
Follow these steps to install the DENALI Horn Mount on your BMW F850GS or F750GS motorcycle:
- バイクを準備する: Park the motorcycle on a level surface using its center stand or a suitable paddock stand. Ensure the engine is cool. Turn off the ignition and remove the key. Disconnect the negative terminal of the motorcycle battery.
- 取り付けポイントを特定: The horn mount is designed to attach to an existing point on the left side of the engine, typically near the exhaust headers. Refer to the images for the exact location.
- ブラケットを取り付けます: Secure the DENALI horn mount bracket to the designated mounting point on the motorcycle using the provided hardware. Ensure the bracket is oriented correctly as shown in the product images. Hand-tighten fasteners initially.
- 角笛を鳴らす: Attach your DENALI SoundBomb Compact Horn (sold separately) to the newly installed mounting bracket using the horn's own mounting hardware. Ensure the horn is positioned to avoid interference with other motorcycle components and to allow for optimal sound projection.
- 最終締め付け: Once the bracket and horn are correctly positioned, tighten all fasteners securely. Refer to your motorcycle's service manual or the horn's instructions for specific torque values if available. Apply blue threadlocker to critical fasteners for added security.
- バッテリーを再接続してテストします。 Reconnect the negative terminal of the motorcycle battery. Turn on the ignition and test the horn's functionality. Ensure there are no loose connections or obstructions.
画像： View of the motorcycle engine area, indicating the general location where the horn mount will be installed.
Image: The DENALI horn mount bracket securely attached to the motorcycle engine, ready for horn installation.
Image: A DENALI SoundBomb horn mounted onto the DENALI bracket on the motorcycle.
6.運用
This product is a mounting bracket. Its operation is passive, providing a secure location for an aftermarket horn. Ensure the horn itself is correctly wired and functioning according to its own manufacturer's instructions.
7. メンテナンス
- Periodically inspect the horn mount and its fasteners for any signs of loosening, corrosion, or damage.
- Tighten any loose fasteners to prevent vibration-induced wear or detachment.
- Clean the bracket with a mild soap and water solution, avoiding harsh chemicals that could damage the finish.
8。 トラブルシューティング
If the horn does not function after installation:
- 配線を確認してください: Ensure all electrical connections to the horn are secure and correctly wired according to the horn's instructions.
- ヒューズを確認してください: Verify that the horn's fuse (if applicable) is intact and not blown.
- ホーン機能: Test the horn directly by connecting it to a 12V power source to confirm it is operational.
- Mount Security: Ensure the horn mount itself is not interfering with any electrical components or causing a short circuit.
9. 仕様
| 属性 | 詳細 |
|---|---|
| ブランド | デナリ |
| モデル | HMT.07.10800 |
| アイテム重量 | 1ポンド |
| パッケージ寸法 | 7 x 5 x 2インチ |
| メーカー部品番号 | HMT.07.10800 |
| 互換性 | BMW F850GS (2019-2022), BMW F750GS (2019-2022) |
| 注記 | Not compatible with BMW F850GS Adventure |
10. 保証とサポート
For warranty information or technical support regarding your DENALI Horn Mount, please refer to the official DENALI web購入サイトをご覧いただくか、カスタマーサービスに直接お問い合わせください。保証請求のために購入証明書を保管してください。
