Intelbras IVP 2000 SF ワイヤレスパッシブ赤外線センサー取扱説明書

1. はじめに

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras IVP 2000 SF Wireless Passive Infrared Sensor. This device is designed to detect motion by sensing infrared radiation emitted by moving objects, providing an essential component for security systems.

2. 安全情報

インストールと操作の前に、すべての指示を注意深くお読みください。
Do not expose the sensor to direct sunlight, extreme temperatures, or high humidity.
誤って落下するのを防ぐため、デバイスが安定した場所に設置されていることを確認してください。
Only use the specified battery type. Incorrect battery usage may cause damage or malfunction.
デバイスを子供の手の届かない場所に保管してください。

3. パッケージ内容

パッケージにすべてのアイテムが揃っていることを確認します。

1x Intelbras IVP 2000 SF Wireless Passive Infrared Sensor
1x取り付けブラケット
1x Set of Screws and Wall Plugs
1x Battery (Alkaline)
クイックスタートガイド（このマニュアル）1冊

4.製品オーバーview

The Intelbras IVP 2000 SF is a wireless passive infrared sensor designed for indoor use. It features advanced detection technology to minimize false alarms and ensure reliable security monitoring.

Intelbras IVP 2000 SF Wireless Passive Infrared Sensor

図1: フロント view of the Intelbras IVP 2000 SF sensor. This image displays the white casing of the sensor with the Intelbras logo and "IVP 2000 SF" model designation clearly visible on the top front. The translucent detection lens is prominent on the lower front section.

主要コンポーネント:

PIR Lens: Detects infrared radiation from moving bodies.
LEDインジケーター: Provides status feedback (e.g., detection, low battery).
バッテリーコンパートメント: 電源を収容します。
取り付けポイント: For secure installation on a wall.
Tamperスイッチ： Triggers an alarm if the sensor cover is opened.

5. セットアップ

5.1. バッテリーの取り付け

Open the sensor's front cover by gently prying it open from the bottom notch.
Insert the provided alkaline battery into the battery compartment, observing the correct polarity (+/-).
Close the front cover, ensuring it clicks securely into place.

5.2. センサーの取り付け

The sensor is designed for wall mounting. Choose a location that provides optimal coverage of the area to be protected, avoiding direct heat sources or air conditioning vents.

Select a mounting height between 2.0 to 2.2 meters (6.5 to 7.2 feet) from the floor.
取り付けブラケットをテンプレートとして使用し、壁にネジの位置をマークします。
マークした位置に穴を開け、壁プラグを挿入します。
付属のネジを使用して取り付けブラケットを壁に固定します。
Attach the sensor unit to the mounting bracket, ensuring it is firmly seated.

5.3. Pairing with a Security System

Refer to your Intelbras security system or smart hub manual for specific instructions on how to add a new wireless sensor. Generally, the process involves:

Putting your security system into "pairing" or "enrollment" mode.
Activating the sensor (e.g., by triggering it or pressing a specific button, if available, or by installing the battery for the first time).
Confirming successful pairing through the system's interface or LED indicators.

6. センサーの操作

6.1. Detection Principle

The IVP 2000 SF sensor operates on the principle of passive infrared (PIR) detection. It detects changes in infrared energy within its field of view, which are typically caused by the movement of a warm body. When a significant change is detected, the sensor transmits a signal to the connected security system.

6.2. LEDインジケーターのステータス

簡単なフラッシュ: 動きの検出を示します。
Continuous Flash: May indicate low battery or a fault. Refer to the troubleshooting section.
光なし: Normal standby mode, or battery is completely depleted.

6.3. Detection Range and Coverage

The sensor typically offers a detection range of up to 12 meters (39 feet) with a coverage angle of approximately 90 degrees. Optimal performance is achieved when movement occurs across the sensor's field of view 直接それに向かうのではなく。

7. メンテナンス

7.1. 清掃

定期的にセンサーのレンズとcを清掃してくださいasing with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.

7.2. バッテリーの交換

When the LED indicator signals a low battery (e.g., continuous flashing or specific system notification), replace the battery promptly. Follow the battery installation steps outlined in section 5.1. Dispose of old batteries according to local regulations.

7.3. 定期的なチェック

Test the sensor's functionality regularly (e.g., monthly) by walking through its detection zone to ensure it triggers an alarm or notification on your security system.

8。トラブルシューティング

問題	考えられる原因	解決
センサーが動きを検知していません。	バッテリー残量が少ないか切れています。取り付け位置が正しくありません。検出経路に障害物があります。 Sensor not paired correctly.	バッテリーを交換してください。 Adjust mounting height/angle. 障害物を取り除いてください。 Re-pair the sensor with the security system.
誤報です。	Direct sunlight or heat sources. Air conditioning/heating vents. Pets (if not pet-immune model). 取り付けが緩い。	Relocate sensor away from heat/sun. Ensure stable mounting. Consult system manual for pet immunity settings if applicable.
LED indicator flashing continuously.	バッテリー残量が少なくなりました。	バッテリーを交換してください。
Sensor not communicating with the security system.	範囲外です。干渉。 System not in pairing mode.	Relocate sensor closer to the system. Check for sources of wireless interference. Ensure system is in pairing mode during enrollment.

9. 仕様

ブランド： インテルブラス
モデル： IVP2000SF
電源: 電池駆動
電池のタイプ： アルカリ
取り付けタイプ: 壁掛け
対応デバイス: Intelbras security systems and smart home hubs
製品寸法: 約17 x 10 x 9 cm（6.7 x 3.9 x 3.5インチ）
検出方法: パッシブ赤外線（PIR）
検出範囲: 最大12メートル（39フィート）
検出角度: 約90度
動作環境: 屋内使用のみ

10. 保証情報

Intelbras products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Intelbras web公式サイトをご覧いただくか、カスタマーサポートまでお問い合わせください。保証請求のために購入証明書を保管してください。

11. サポート

If you encounter any issues or have questions regarding your Intelbras IVP 2000 SF sensor that are not covered in this manual, please contact Intelbras customer support through their official channels:

Webサイト： Visit the official Intelbras webサポートリソース、FAQ、および連絡先情報に関するサイト。
電話： Refer to the contact section on the Intelbras webローカルサポート番号のサイト。

	Intelbras IVP 1000 Pet SF Wireless Motion Sensor User Manual User manual for the Intelbras IVP 1000 Pet SF wireless passive infrared motion sensor. Includes installation, operation, technical specifications, care, and warranty information.
	Intelbras IVP 4000 Smart Passive Infrared Sensor User Manual User manual for the Intelbras IVP 4000 Smart passive infrared sensor. Provides detailed information on installation, configuration, technical specifications, operating modes, testing, and warranty.
	Intelbras IVP 8000 EX 赤外線パッシブセンサーユーザーガイド Intelbras IVP 8000 EX赤外線パッシブモーションセンサーの包括的なユーザーガイド。このセキュリティデバイスの機能、技術仕様、設置手順、設定オプション、保証情報について詳しく説明しています。
	Intelbras IVP 3011 Teto (Ceiling) Infrared Passive Sensor User Manual Comprehensive user manual for the Intelbras IVP 3011 Teto (Ceiling) infrared passive motion sensor. Includes installation, operation, technical specifications, features, safety guidelines, and warranty information.
	Intelbras IVP 8000 Pet User Guide: Passive Infrared Motion Sensor Comprehensive user guide for the Intelbras IVP 8000 Pet passive infrared motion sensor. Learn about installation, configuration, features, safety, and warranty for this wireless security device.
	Intelbras IVP 8000 MW Pet User Guide: Installation and Configuration Discover the Intelbras IVP 8000 MW Pet, a wireless passive infrared motion sensor with microwave detection. This user guide covers installation, configuration, pet immunity features (up to 20kg), tamper-proof security, and technical specifications for optimal home or business security.