Finder 80.01.0.240.0000 モジュラー多機能タイマー取扱説明書

1. はじめに

The Finder 80.01.0.240.0000 is a versatile modular multi-function and multi-voltage time delay relay from the 80 Series. This device is designed for precise timing control in various industrial and domestic applications, featuring a 16A Single Pole Double Throw (SPDT) output contact. Its modular design allows for easy integration into electrical panels.

2 製品の特徴

• Modular Multi-function Time Delay
• Suitable for Timing Alternating & Sequencing Relay applications
• マルチボリュームtage operation (12...240V AC/DC)
• 16A SPDT output contact
• Five selectable timing functions

3. 安全情報

Please read and understand all instructions before installing or operating this device. Failure to follow these instructions may result in electrical shock, fire, or serious injury. Installation and maintenance should only be performed by qualified personnel in accordance with all local and national electrical codes.

• Always disconnect power before installation, wiring, or maintenance.
• 供給量を確認するtageはデバイスの仕様と一致します。
• Do not exceed the maximum current rating of the output contacts.
• デバイスを湿気、ほこり、極端な温度から保護してください。

4. セットアップとインストール

The Finder 80.01.0.240.0000 timer is designed for DIN rail mounting. Ensure the mounting location is stable, free from vibrations, and provides adequate ventilation.

4.1. 取り付け

1. Securely attach the timer to a standard 35mm DIN rail.
2. Ensure sufficient space around the device for wiring and heat dissipation.

4.2.配線

Refer to the wiring diagram below and the markings on the device for correct connections. Use appropriate wire gauges for the current and voltage評価。

図1: Finder 80.01.0.240.0000 Modular Timer. This image displays the Finder 80.01.0.240.0000 modular timer. Visible elements include the power supply terminals A1 and A2 at the top, a control input B1, and output contacts 15, 16, and 18 at the bottom. The front panel features a time setting dial marked 'T' with values from 1 to 20, and a function selector dial labeled 'AI'. The operating voltage range 'Un 12...240V' and contact rating '16A 250V~' are also indicated.

• A1、A2: Power Supply Terminals (Un 12...240V AC/DC). Connect the control voltageここ。
• B1: Control Input. This terminal is used for specific timing functions (e.g., start/reset).
• 15: Common Contact for the SPDT output relay.
• 16: Normally Closed (NC) Contact. This contact is closed when the relay is de-energized and open when energized.
• 18: Normally Open (NO) Contact. This contact is open when the relay is de-energized and closed when energized.

5. 操作手順

The timer features two rotary dials on the front panel for setting the timing function and the time delay value.

5.1. 機能選択

The lower rotary dial, labeled 'AI' (as seen in Figure 1), is used to select one of the five available timing functions. Refer to the product's detailed datasheet for a complete description of each function (e.g., ON-delay, OFF-delay, Flasher, etc.). Rotate the dial to align the desired function symbol with the indicator mark.

5.2.時間設定

The upper rotary dial, labeled 'T' (as seen in Figure 1), is used to set the time delay value. The dial typically has a range (e.g., 1 to 20 seconds, minutes, or hours) and a multiplier (e.g., '2s' for 2 seconds). Rotate the dial to the desired time value. The specific time range and multiplier depend on the model variant and selected function.

6. メンテナンス

The Finder 80.01.0.240.0000 timer is designed for long-term, maintenance-free operation under normal conditions.

• クリーニング： If necessary, gently clean the exterior of the device with a dry, soft cloth. Do not use abrasive cleaners or solvents.
• 検査： 配線接続部の締め付け具合や摩耗、腐食の兆候がないか定期的に点検してください。
• 環境： 動作環境が指定された温度と湿度の範囲内であることを確認してください。

7。 トラブルシューティング

タイマーが期待どおりに機能しない場合は、次の一般的な問題を検討してください。

• 電源なし: Check the power supply to terminals A1 and A2. Ensure the voltage is within the specified range (12...240V AC/DC).
• 配線ミス: Verify all connections against the wiring diagram. Ensure terminals 15, 16, and 18 are correctly connected to the load.
• Function/Time Setting: Confirm that the desired timing function and time delay are correctly set using the front panel dials.
• Control Input (B1): If using a control input, ensure it is correctly wired and receiving the expected signal.
• オーバーロード: Check if the load connected to the output contacts exceeds the 16A rating.

If problems persist, contact Finder technical support or a qualified electrician.

8. 仕様

9. 保証とサポート

保証情報およびテクニカルサポートについては、公式Finderを参照してください。 web当サイトをご覧いただくか、Finderの正規販売店にお問い合わせください。保証請求のために購入時の領収書を保管してください。

メーカー: ファインダ

Webサイト： www.finder-relays.com （公式 webあなたの地域のサイト