導入
This manual provides essential information for the safe and efficient use of your Beghelli 19432 LED Emergency Lamp. Please read this manual thoroughly before installation, operation, or maintenance to ensure proper functioning and to prevent damage or injury.
The Beghelli 19432 is a high-performance LED emergency lamp designed for reliable illumination during power outages or emergency situations. It features a robust polycarbonate construction and a powerful 1200 lumen LED light source with Li-Fe battery technology.
安全情報
感電、火災、または怪我を防ぐために、常に次の安全ガイドラインに従ってください。
- 設置またはメンテナンスの前に、電源が切断されていることを確認してください。
- 設置は地域の電気規則に従って資格のある電気技師が行う必要があります。
- lを露出させないでくださいamp to excessive moisture or extreme temperatures.
- lを開いたり変更したりしないでくださいamp housing, as this may void the warranty and pose a safety risk.
- 梱包材はお子様の手の届かないところに保管してください。
パッケージ内容
すべてのコンポーネントが存在し、損傷がないことを確認します。
- Beghelli 19432 LED Emergency Lamp ユニット
- Integrated Li-Fe Battery
- 取り付けアクセサリ（ネジ、壁プラグ）
- ユーザーマニュアル（このドキュメント）
セットアップとインストール
The Beghelli 19432 emergency lamp is designed for wall mounting. Follow these steps for proper installation:
- 場所を選択: Select a suitable location for installation, typically near an exit or in a common area, ensuring the light can illuminate the required path during an emergency. The lamp is designed for indoor use in commercial or emergency exit applications.
- 取り付け面を準備します。 Ensure the wall surface is clean, dry, and capable of supporting the lampの体重。
- 掘削ポイントをマークする: lを使用するamp's mounting holes as a template to mark the drilling points on the wall.
- ドリル穴: Drill holes at the marked points using an appropriate drill bit for the wall plugs.
- 壁プラグを挿入する: 付属の壁プラグをドリルで開けた穴に挿入します。
- Lをマウントしますamp: lを確保するamp 付属のネジを使用して壁にしっかりと固定してください。
- 接続電源： lを接続するamp to the main power supply according to the wiring diagram (refer to the diagram usually found inside the lamp's cover or on a separate sheet, not provided here). Ensure correct polarity and secure connections. The lamp is battery-operated but requires a constant power supply to keep the battery charged and for automatic operation.
- 初期費用： After installation, allow the lamp to charge for at least 24 hours before its first use to ensure the battery is fully charged.
Image: The Beghelli 19432 LED Emergency Lamp, featuring its sleek white polycarbonate housing and the transparent light diffuser, designed for efficient light distribution.
操作手順
The Beghelli 19432 operates automatically:
- 通常操作: When connected to the main power supply, the lamp's battery will charge, and the lamp will remain off (or in standby mode, depending on configuration).
- 緊急モード： 停電時には、amp will automatically switch on, providing 1200 lumens of illumination from its internal Li-Fe battery.
- 通常状態に戻る: Once main power is restored, the lamp will automatically switch off and begin recharging its battery.
- Test Button (if applicable): Some models may include a test button to manually check the emergency function. Press and hold the button to simulate a power outage and verify the lamp illuminates. Release the button to return to normal operation. (Note: Specific button location and function may vary; refer to product labeling if present.)
メンテナンス
Regular maintenance ensures the longevity and reliability of your emergency lamp:
- クリーニング： lをきれいにするampの外側は柔らかく乾いた布で拭いてください。研磨剤入りの洗剤や溶剤は使用しないでください。
- バッテリーチェック: Perform a monthly functional test by simulating a power outage (e.g., by pressing the test button or temporarily disconnecting power) to ensure the battery holds a charge and the lamp illuminates for the specified duration.
- Annual Discharge Test: Annually, perform a full discharge test. Disconnect the main power supply and allow the lamp to operate until the battery is fully depleted. Then, reconnect power and allow it to recharge for 24-48 hours. This helps maintain battery health.
- バッテリー交換: The integrated Li-Fe battery has a long lifespan but will eventually require replacement. This should only be performed by qualified personnel. Contact Beghelli support for authorized service.
- Lamp 交換： The LED light source is designed for long-term use and is generally not user-replaceable. If the LEDs fail, the entire unit may need replacement.
トラブルシューティング
一般的な問題とその解決策については、以下の表を参照してください。
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Lamp 電源オフ時には点灯しませんtage. | バッテリーが充電されていないか故障しています。 配線が正しくありません。 Lamp 故障。 | 確実にlamp has been connected to power for at least 24 hours. 配線接続を確認してください。 問題が解決しない場合は、資格のあるサービス担当者に連絡してください。 |
| Lamp 常にオンのままです。 | Main power supply issue. 内部障害。 | Verify main power supply is stable. Disconnect and reconnect power. If issue persists, contact qualified service personnel. |
| Reduced illumination duration. | バッテリーの劣化。 充電不足です。 | Perform annual full discharge/recharge cycle. Ensure continuous power supply for charging. Battery may need replacement by qualified personnel. |
If you encounter issues not listed here or if the suggested solutions do not resolve the problem, please contact Beghelli customer support.
仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | 19432 |
| ブランド | ベゲリ |
| 光源 | 導かれた |
| 光束 | 1200ルーメン |
| 消費電力 | 24ワット |
| 電池のタイプ | Li-Fe (Lithium Iron) |
| 材料 | Policarbonato (Polycarbonate) |
| 色 | 白 |
| 応用分野 | Commercial, Emergency Exit |
| 取り付けタイプ | Wall Mount (Parete) |
| スイッチタイプ | 自動 |
| 最初に利用可能 | 16年2019月XNUMX日 |
保証とサポート
For warranty information, please refer to the documentation provided with your purchase or visit the official Beghelli website. Beghelli products are designed for durability and performance.
For technical support, service, or inquiries regarding replacement parts, please contact Beghelli customer service through their official channels. Contact information can typically be found on the Beghelli webサイトまたは製品パッケージに記載されています。
リサイクル情報: For information on recycling this product, particularly the lamp and battery components, please refer to local regulations and recycling guidelines. Specific information regarding lamp recycling and disposal of broken or damaged lamps can often be found on the manufacturer's website or through local waste management services.
