1. はじめに
This manual provides essential information for the proper use, maintenance, and care of your Shoei Neotec 2 Modular Motorcycle Helmet. Please read this manual thoroughly before using the helmet to ensure your safety and to maximize the helmet's lifespan and performance. The Shoei Neotec 2 is designed as a modular touring helmet, offering versatility and protection for street motorcycle use. This helmet is DOT FMVSS No. 218 Certified, meeting safety standards for motorcycle helmets.
2. セットアップと初期検査
2.1 Unpacking and Visual Inspection
Carefully remove the helmet from its packaging. Inspect the helmet for any signs of damage that may have occurred during shipping. Check the shell, visor, chin bar, and retention system for cracks, scratches, or deformities. Do not use the helmet if any damage is observed.
Figure 1: Shoei Neotec 2 Modular Motorcycle Helmet. This image displays the helmet in a black and white finish, showcasing its modular design with the chin bar in the closed position.
2.2 Proper Fitment
最大限の保護効果を得るには、ヘルメットはしっかりとフィットする必要があります。フィット感を確認するには、以下の手順に従ってください。
- Place the helmet on your head. It should feel tight around your cheeks and the top of your head.
- Fasten the chin strap securely. The strap should be snug under your chin, without causing discomfort.
- あご紐を締めた状態で、ヘルメットを左右上下に動かしてみてください。ヘルメットに合わせて皮膚も動くはずです。ヘルメットが勝手に動く場合は、サイズが大きすぎます。
- Ensure there are no pressure points that cause pain.
Refer to the size guide if available, or consult with a professional for assistance with fitment.
3. 操作手順
3.1 モジュラーチンバーの操作
The Neotec 2 features a modular chin bar that can be raised. To operate:
- 開くには: Locate the release button or lever, typically at the front center of the chin bar. Press the button and lift the chin bar upwards until it locks into the open position.
- 終了するには： Firmly pull the chin bar downwards until it clicks securely into the closed position. Ensure it is fully latched before riding.
3.2 Visor and Internal Sun Shield
The helmet is equipped with an external clear visor and an internal drop-down sun shield.
- External Visor: The clear visor can be opened and closed manually. It may feature a quick-release mechanism for removal and cleaning. Consult the specific visor removal instructions if needed.
- 内部サンシールド: Operate the sun shield using the slider mechanism, usually located on the side of the helmet. Slide it down to deploy the sun shield and up to retract it. Use the sun shield only in appropriate lighting conditions.
3.3 換気システム
The Neotec 2 includes adjustable vents for airflow. Locate the intake vents (typically on the chin bar and forehead) and exhaust vents (rear). Slide or click the vent covers to open or close them, adjusting airflow as desired.
4. メンテナンスとケア
4.1 ヘルメットシェルのクリーニング
Clean the helmet shell with a soft cloth and mild soap and water. Avoid harsh chemicals, solvents, or abrasive cleaners, as these can damage the helmet's finish and materials. Rinse thoroughly and dry with a soft, clean cloth.
4.2 Visor and Sun Shield Cleaning
Clean the visor and sun shield with warm water and a soft cloth. For stubborn dirt, use a helmet-specific visor cleaner. Do not use paper towels or abrasive materials, as they can scratch the surfaces. Allow to air dry or gently blot with a microfiber cloth.
4.3 Interior Liner Care
The interior comfort liner is typically removable for cleaning. Follow these steps:
- Carefully remove the cheek pads and headliner according to the helmet's specific instructions (usually involves snaps or clips).
- Hand wash the liner components in cold water with mild soap.
- 再取り付けする前に、よくすすいで完全に自然乾燥させてください。洗濯機やタンブル乾燥は使用しないでください。
4.4 ストレージ
ヘルメットは直射日光や極端な温度を避け、涼しく乾燥した場所に保管してください。ヘルメットバッグに入れて、ほこりや傷から保護してください。
5。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Helmet feels too loose or too tight | Incorrect size or improper fitment | Re-evaluate fitment (Section 2.2). Consider trying a different size or cheek pad thickness. |
| Chin bar does not latch securely | Obstruction or mechanism issue | Check for debris. Ensure the chin bar is aligned correctly. If problem persists, contact support. |
| バイザーが曇りやすい | Lack of airflow, temperature difference | Open vents. Consider using an anti-fog insert (if compatible) or anti-fog spray. |
| 過度の風切り音 | Improper fit, open vents, worn seals | Ensure proper fitment. Close unused vents. Inspect visor and chin bar seals for damage. |
6. 仕様
- モデル： Shoei Neotec 2
- 部品番号: 0116-0159-05
- 認証： DOT FMVSS No. 218認定
- シェルタイプ: Hard, Aerodynamic
- 外側素材: アクリロニトリルブタジエンスチレン
- 内側素材: 発泡ポリスチレン（EPS）
- 推奨ユーザー: ユニセックス-大人
- 車両サービスの種類: ストリートバイク
- パッケージの概算重量: 2.72キログラム（6ポンド）
- Approximate Item Dimensions (LxWxH): 11.5 x 11.5 x 15.5インチ
- 入手可能なサイズ: X-Small, Small, Medium, Large, X-Large, 2X-Large
7. 保証とサポート
For warranty information, please refer to the official Shoei website or the warranty card included with your purchase. Shoei helmets typically come with a limited warranty covering manufacturing defects. Keep your proof of purchase for warranty claims.
For technical support, replacement parts, or further assistance, please contact Shoei customer service directly. Contact details can usually be found on the official Shoei website or in the documentation provided with your helmet.
重要： Never modify your helmet. Any modifications can compromise its protective capabilities and void the warranty. In case of an impact, even if no visible damage is present, the helmet's protective structure may be compromised. It is recommended to replace the helmet after any significant impact.