1. 重要な安全情報
警告： Failure to follow these safety instructions could result in serious injury or death. Always read and understand the full manual before operating the sprayer.
- 適切な電気接地を確保してください。
- Avoid contact with pressurized liquids.
- Use appropriate personal protective equipment (PPE) when handling chemicals, including eye protection, gloves, and respiratory protection.
- Maintain the device as instructed to prevent mechanical failure or injury.
- スプレーガンを自分自身や他人に向けないでください。
- Always relieve pressure before cleaning, servicing, or storing the unit.
2.製品オーバーview
The Graco Ultra Max II 495 PC Pro is a professional-grade electric airless paint sprayer designed for high-performance painting applications. This Hi-Boy model offers enhanced portability and stability for various job sites.
Figure 1: Graco Ultra Max II 495 PC Pro Electric Airless Paint Sprayer. This image shows the complete sprayer unit, including the main pump, motor, hose, and spray gun, set up for operation.
主な特徴:
- SmartControl 3.0: Monitors performance, adjusts motor speed, measures sprayer gallons, hours, and pressure, and provides diagnostic support.
- BlueLink Job and Sprayer Management System: Enables tracking of sprayer usage, job progress, and maximizes uptime.
- MaxPower Brushless DC Motor: Delivers high torque and maintenance-free performance.
- FastFlush High-Flow Cleaning System: Allows for 4X faster cleaning with half the water.
- Hi-Boy Design: Provides easy transport and stability with a kickstand for convenient bucket changes.
3. セットアップと組み立て
Before operating your Graco Ultra Max II 495 PC Pro, ensure all components are correctly assembled and connected.
3.1 開梱と検査
- パッケージからすべてのコンポーネントを慎重に取り出します。
- 輸送中の損傷がないか確認してください。損傷が見つかった場合は、直ちに販売店にご連絡ください。
- 梱包リストに記載されている部品がすべて揃っていることを確認します。
3.2 Assembly (Hi-Boy Model)
- 付属の金具を使用してハンドルを本体に取り付けます。
- Secure the hose and spray gun to the designated connections. Ensure all connections are tight to prevent leaks.
- Position the unit on a stable, level surface. The Hi-Boy design includes a kickstand for stability during bucket changes.
3.3 電源の接続
- Connect the power cord to a properly grounded electrical outlet. Refer to local electrical codes for requirements.
- Ensure the power switch on the sprayer is in the "OFF" position before connecting to power.
3.4 スプレーガンのプライミング
- Place the suction tube into the paint container.
- Turn the prime valve to the "PRIME" position.
- Turn on the sprayer. Allow the unit to run until paint flows smoothly from the prime hose, indicating air has been purged from the system.
- Turn off the sprayer and return the prime valve to the "SPRAY" position.
4. 操作手順
Proper operation ensures efficient and consistent paint application.
4.1 SmartControl 3.0 System
The SmartControl 3.0 system continuously monitors the sprayer's performance and adjusts the motor speed to match your spraying needs. This ensures a consistent spray pattern and finish. The display provides real-time information on:
- Sprayer gallons used
- 営業時間
- Current pressure settings
- Diagnostic support messages
4.2 BlueLink Job and Sprayer Management System
Utilize the BlueLink system to track your sprayer's activity and manage job progress. This feature helps maximize uptime by providing insights into usage and maintenance schedules.
4.3 スプレー技術
- スプレーガンを表面に対して垂直に持ち、一定の距離（通常は 10 ～ 12 インチ）を保ちます。
- Begin moving your arm before pulling the trigger and release the trigger before stopping your arm movement.
- Overlap each pass by approximately 50% to ensure even coverage.
- Adjust pressure settings on the SmartControl 3.0 as needed for different materials and desired finishes.
5. メンテナンスと清掃
Regular maintenance and thorough cleaning are essential for extending the life of your Graco Ultra Max II 495 PC Pro and ensuring optimal performance.
5.1 FastFlush High-Flow Cleaning System
The FastFlush system allows for quick and efficient cleaning. Follow these steps:
- Relieve pressure from the system.
- Remove the suction tube from the paint and place it into a bucket of appropriate cleaning solution (water for latex, mineral spirits for oil-based paints).
- Turn the prime valve to the "CLEAN" or "FLUSH" position (refer to specific model instructions for exact valve position).
- Turn on the sprayer and allow the cleaning solution to circulate until it runs clear from the prime hose and spray gun.
- Turn off the sprayer and relieve pressure.
- Remove and clean the spray tip and guard separately.
5.2 一般的なメンテナンス
- Inspect hoses and connections regularly for wear or damage. Replace as needed.
- Check the spray tip for wear. A worn tip will result in a poor spray pattern and increased material consumption.
- The MaxPower Brushless DC Motor is designed for maintenance-free performance, but ensure it remains free of debris.
- Store the sprayer in a clean, dry environment, protected from freezing temperatures.
6。 トラブルシューティング
This section provides solutions to common issues you may encounter during operation. For more complex problems, consult the full Graco service manual or contact customer support.
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| スプレーなしまたは低圧 | Clogged tip, clogged filter, air in system, worn pump packings. | Clean tip/filters, re-prime unit, inspect/replace packings. |
| 脈動スプレー | Air in system, loose suction tube, worn inlet valve. | Re-prime, tighten connections, inspect/replace inlet valve. |
| Poor spray pattern (tails) | Worn spray tip, incorrect pressure setting, material too thick. | Replace tip, adjust pressure, thin material if necessary (follow paint manufacturer guidelines). |
| Motor runs but no pressure builds | Inlet valve stuck open, prime valve in wrong position. | Clean/free inlet valve, ensure prime valve is in "SPRAY" position. |
The SmartControl 3.0 display may also provide specific diagnostic codes or messages to assist in troubleshooting.
7. 仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | グラコ |
| モデル名 | ウルトラマックスII |
| モデル番号 | 17E857 (ULTRA MAX II-495 PC PRO) |
| 電源 | 電気 |
| 推奨用途 | 絵画 |
| 材料 | ステンレス鋼 |
| 色 | 青 |
| アイテム重量 | 83.8ポンド |
| パッケージ寸法 | 32.5 x 24.5 x 22インチ |
| 特集 | エアレス |
| 電池付属 | いいえ |
| 電池が必要 | いいえ |
| メーカー | グラコ |
| 欧州連合 | 755652818694 |
8. 保証と顧客サポート
保証の詳細については、製品に付属のマニュアルを参照するか、Gracoの公式ウェブサイトをご覧ください。 website. Graco provides comprehensive customer support for all its products.
If you require assistance with setup, operation, maintenance, or troubleshooting beyond the scope of this manual, please contact Graco Customer Support directly. Contact information can typically be found on the product packaging or the manufacturer's webサイト。
