1. はじめに
This instruction manual provides essential information for the proper installation, operation, and maintenance of your ALPINE VIE-X08VS Genuine Terrestrial Digital TV Film Antenna and Cord Set (Model AD22S). Designed as a genuine accessory for ALPINE navigation systems, this product ensures high-sensitivity reception for terrestrial digital broadcasting, offering reliable performance and quality. Please read this manual thoroughly before installation and use to ensure optimal functionality and safety.
2. 安全情報
Always observe the following safety precautions to prevent accidents, injury, or damage to the product and vehicle:
- Ensure the vehicle's ignition is off and the battery is disconnected before beginning any installation work.
- Do not install the antenna in locations that obstruct the driver's view またはエアバッグの展開を妨げます。
- Route cables carefully to avoid pinching, sharp edges, or interference with moving parts of the vehicle.
- Use only the genuine parts provided with this set. Using non-genuine parts may lead to malfunction or damage.
- インストールプロセスのいずれかの部分について不明な点がある場合は、資格のある専門家にご相談ください。
3. パッケージ内容
パッケージにすべてのコンポーネントが含まれていることを確認します。
- Terrestrial Digital TV Film Antenna Elements (typically 4 for 4-channel models)
- Antenna Connection Cords (coaxial cables with connectors)
- アンテナ Amplifier/Booster Units (integrated with cords or separate)
- Adhesive for film antenna elements
図1：以上view of the ALPINE VIE-X08VS Film Antenna and Cord Set components.
4. セットアップとインストール
Follow these steps for proper installation of the film antenna and cord set:
4.1 設置場所の準備
- Clean the inner surface of the windshield or rear window where the film antenna will be applied. Ensure it is free of dust, grease, and moisture.
- Determine the optimal placement for the antenna elements. Typically, they are placed on the upper corners of the windshield or rear window, ensuring minimal obstruction and good signal reception.
4.2 Attaching the Film Antenna Elements
- Carefully peel the backing from the adhesive side of each film antenna element.
- Apply the antenna element firmly to the chosen location on the glass, pressing out any air bubbles to ensure full adhesion.
- Repeat for all antenna elements. For 4-channel systems, two sets of antenna elements are typically required.
4.3 Connecting the Antenna Cords
- Connect the small connector from each antenna cord to its corresponding film antenna element. Ensure a secure connection.
- Route the antenna cords along the vehicle's pillars and headliner, tucking them neatly behind trim panels to conceal them and prevent interference.
- Connect the larger end of the antenna cords to the designated antenna input terminals on your ALPINE navigation system. Refer to your navigation system's manual for specific port locations.
Figure 2: Detail of an antenna amplifier unit and connector for the film antenna.
5. 操作手順
Once the antenna set is installed and connected to your ALPINE navigation system, follow these general steps to utilize the terrestrial digital TV function:
- Turn on your ALPINE navigation system.
- Navigate to the TV function on your system's menu.
- Perform an automatic channel scan to detect available terrestrial digital TV broadcasts in your area.
- For optimal reception, ensure the vehicle is in an area with good digital TV signal coverage. Signal strength can vary based on location, terrain, and building obstructions.
- Adjust the antenna settings within your navigation system if available, to fine-tune reception.
6. メンテナンス
The ALPINE VIE-X08VS antenna set requires minimal maintenance:
- Keep the film antenna elements clean. Gently wipe them with a soft, damp cloth if they become dirty. Avoid using abrasive cleaners or solvents.
- Periodically check the cable connections to ensure they remain secure.
- Do not attempt to remove or reposition the film antenna elements once they have been applied, as this may damage the adhesive or the antenna itself.
7。 トラブルシューティング
If you experience issues with your terrestrial digital TV reception, consider the following:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| No TV signal or poor reception | Weak signal area, incorrect connection, damaged antenna/cable | Move to an area with better signal coverage. Check all cable connections to the antenna elements and navigation system. Inspect antenna elements and cables for visible damage. Perform a channel rescan. |
| Picture freezing or pixelation | Intermittent signal, interference | Ensure no electronic devices are causing interference near the antenna. Try repositioning the vehicle. Check for any obstructions blocking the signal. |
| Antenna elements peeling off | Improper initial application, extreme temperature changes | Re-apply with new adhesive if possible, or replace the affected antenna element. Ensure proper cleaning and firm application during installation. |
If problems persist after attempting these solutions, contact ALPINE customer support or a qualified service technician.
8. 仕様
- ブランド： 高山
- メーカー: 高山
- モデル番号: AD22S (812ad22svie-x08vs)
- ASIN: B07NTWNHY7
- アンテナタイプ: Terrestrial Digital TV Film Antenna
- 互換性: Designed for ALPINE VIE-X08VS navigation systems
- チャンネルサポート: 4-channel (requires 2 sets of antenna cords/elements for full 4-channel reception)
9. 保証とサポート
This ALPINE product is covered by a manufacturer's warranty. Please refer to the warranty card included with your original ALPINE navigation system or visit the official ALPINE website for detailed warranty terms and conditions. For technical support, product inquiries, or service, please contact ALPINE customer service through their official channels.
ALPINE Official Webサイト： www.alpine.com
