導入
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Datalogic Gryphon GM4500 Wireless Barcode Scanner Kit. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.
パッケージ内容
パッケージにすべてのアイテムが含まれていることを確認します。
- Datalogic Gryphon GM4500 Wireless Barcode Scanner (GM4500-BK-433K1)
- Wireless Charging Base (WLC4090-BK-433)
- USB Cable (90A052258)
- リチウムイオンバッテリー（プリインストールまたは別売）
製品終了view
The Datalogic Gryphon GM4500 is a high-performance wireless barcode scanner designed for various applications. Below is an illustration of the scanner's main components.
Image: Datalogic Gryphon GM4500 Wireless Barcode Scanner. This image shows the black handheld scanner with its scan window emitting light, and a blue trigger button on the handle. The base of the handle features a wireless charging indicator.
主要コンポーネント:
- スキャンウィンドウ: バーコードを読み取るエリア。
- トリガーボタン: スキャンビームをアクティブにします。
- インジケーターライト: Provide feedback on status (e.g., battery, scan success).
- Wireless Charging Contacts: Located at the base of the scanner for charging with the WLC4090-BK-433 base.
- ワイヤレス充電ベース： Connects to the host system via USB and charges the scanner.
設定
- スキャナーを充電します:
- Connect the USB cable to the Wireless Charging Base (WLC4090-BK-433) and then to a powered USB port on your computer or a USB power adapter.
- Place the Gryphon GM4500 scanner onto the charging base. Ensure the charging contacts align.
- The scanner's indicator light will show charging status. Allow sufficient time for a full charge before first use.
- Connect the Base to Host System:
The charging base also acts as the communication interface. Once connected via USB, your operating system should automatically detect and install the necessary drivers. If not, refer to Datalogic's official webドライバーダウンロードのサイト。
- Pairing the Scanner with the Base:
The scanner and base are typically pre-paired. If pairing is lost or you are setting up a new scanner/base combination:
- Ensure the base is powered and connected to the host system.
- Refer to the Datalogic Gryphon GM4500 Quick Reference Guide (usually included or available online) for specific pairing barcode sequences. Scan the designated pairing barcode with the scanner.
- A successful pairing will be indicated by an audible beep and/or a specific LED pattern on both the scanner and the base.
操作手順
- バーコードのスキャン:
- Point the scan window of the Gryphon GM4500 at the barcode you wish to read.
- Press and hold the trigger button. A red aiming beam or illumination pattern will appear.
- 照準ビームがバーコード全体をカバーするようにスキャナーを配置します。
- Once the barcode is successfully read, the scanner will emit a short beep and/or an indicator light will flash green. The data will be transmitted to your host system.
- Reading Difficult Barcodes:
For poorly printed, damaged, or reflective barcodes, try adjusting the distance and angle of the scanner. Sometimes, scanning from a slight angle can improve readability.
- バッテリーレベルの表示：
The scanner typically has an LED indicator that changes color or flashes to indicate the battery charge level. Refer to the full product manual for specific LED patterns and their meanings.
メンテナンス
- スキャナーのクリーニング:
Regularly clean the scan window and the exterior of the scanner. Use a soft, lint-free cloth lightly dampened with water or a mild, non-abrasive cleaning solution. Do not use harsh chemicals or abrasive materials, as these can damage the device.
- バッテリーのケア：
To prolong battery life, avoid exposing the scanner to extreme temperatures. Charge the battery regularly and avoid completely draining it whenever possible. If the scanner will be stored for an extended period, ensure it has a partial charge (around 50%) and store it in a cool, dry place.
- ストレージ：
When not in use, store the scanner on its charging base or in a safe location to prevent accidental drops or damage.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Scanner does not turn on or respond. | バッテリー残量が少ない、または消耗しています。 | Place the scanner on the charging base and allow it to charge for at least 30 minutes. |
| スキャナーがバーコードを読み取りません。 |
|
|
| Data is not transmitted to the host system. |
|
|
仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | GM4500-BK-433K1 |
| 接続技術 | Wireless (433 MHz), USB Cable (for base) |
| 電源 | 電池式（リチウムイオン電池1個付属） |
| アイテム重量 | 8.6オンス |
| 製品寸法 | 5.12 x 5.12 x 7.87インチ |
| メーカー | データロジック |
| 初回利用可能日 | 5年2019月XNUMX日 |
保証とサポート
For detailed warranty information, please refer to the warranty card included with your product or visit the official Datalogic website. For technical support, driver downloads, or further assistance, please contact Datalogic customer service directly.
メーカー: データロジック
Webサイト： www.datalogic.com
