Anderic RRLC16.2 Universal Replacement Remote Control for Sharp Roku TVs

導入

This manual provides comprehensive instructions for the Anderic RRLC16.2 Universal Replacement Remote Control. Designed specifically for Sharp Roku TVs, this remote offers immediate functionality for compatible Sharp models without requiring any initial programming. It features dedicated shortcut keys for popular streaming services and a secure battery compartment for enhanced durability and safety. For other Roku TV brands or Roku Boxes, programming may be required.

製品の特徴

• Fully Universal: Compatible with all Roku TVs. Note: Not for Roku Streaming Sticks.
• 妥協のない品質： Engineered for superior performance and durability compared to original remotes.
• 簡単な操作: Works identically to the original remote for Sharp Roku TVs without complex setup. (Some shortcut keys may differ).
• Quick Access to Streaming Services: Dedicated shortcut keys for NETFLIX, AMAZON, RDIO, and MGO provide instant access to these streaming platforms.
• 安全なバッテリーコンパートメント: Includes an optional screw to secure the battery cover, preventing accidental opening.

設定

1. 電池の取り付け

The Anderic RRLC16.2 remote requires two AAA batteries (not included). To install:

1. リモコンの背面にある電池ボックスを見つけます。
2. 電池カバーを下方向にスライドさせて開きます。
3. 正しい極性 (+ と -) を確認して、単 4 電池 2 本を挿入します。
4. Replace the battery cover by sliding it upwards until it clicks into place. For added security, use the optional screw to fasten the cover.

Image: Back of the remote control, highlighting the battery compartment and optional screw.

2. Initial Use (Sharp Roku TVs)

For Sharp Roku TV models (e.g., LC-43LB371U, LC-43LB371UA, LC-43LB371UB, LC-50LB371U), the Anderic RRLC16.2 remote is pre-programmed and ready to use immediately after battery installation. No additional setup is required.

3. Programming for Other Roku TVs or Roku Boxes

If you are using the remote with other Roku TV brands (Hisense, Insignia, TCL, Hitachi) or a Roku Box, programming may be necessary. Refer to the "Programming Instructions (via Learning)" section below for detailed steps.

操作手順

画像: 正面 view of the Anderic RRLC16.2 remote control.

• 電源スイッチ （●): Located at the top, press to turn your TV on or off.
• Directional Pad (Purple Arrows) & OK Button: Use the arrow buttons to navigate menus and select options. Press the central "OK" button to confirm selections.
• 戻るボタン （←): 前の画面またはメニューに戻ります。
• ホームボタン （⌂): Roku のホーム画面に戻ります。
• Volume & Mute Buttons: Located on the side of the remote. Use the volume up/down buttons to adjust audio levels and the mute button to silence audio.
• 再生/一時停止、巻き戻し、早送り: Standard media control buttons for content playback.
• ショートカットキー Dedicated buttons for NETFLIX, AMAZON, RDIO, and MGO provide instant access to these streaming platforms.

互換性

The Anderic RRLC16.2 remote control is designed for broad compatibility with Roku TVs. Please review the compatibility details below:

• Pre-Programmed for Sharp Roku TV Models: LC-43LB371U, LC-43LB371UA, LC-43LB371UB, LC-50LB371U.
• Compatible with Other Roku TV Brands (Requires Programming): Hisense, Insignia, TCL, Hitachi.
• Compatible with Roku Box (Requires Programming).
• NOT Compatible with Roku Streaming Sticks.

Image: Anderic RR-LC-16.2 Compatibility Chart.

Programming Instructions (via Learning)

This remote can be programmed to work with any TV via the learning method. This method does not require codes. Note: All keys on the RR-LC-16.2 may be learned. Original remote is needed.

1. を押し続けます ⌂ （ホーム）と ← (Back) keys simultaneously for about 3 seconds. The indicator light will light up and remain on. Release the keys.
2. Press and release the key to be learned. The indicator light will flash slowly.
3. Point the original remote control head-to-head with the RR-LC-16.2, making sure the IR (infrared) light bulb at the top edge of the remote aligns directly with the lens on the front of the RR-LC-16.2, with a distance of about 3cm.
4. Press and hold the key on the original remote that you want the RR-LC-16.2 to learn. The indicator light will flash 3 times to confirm and then remain on, waiting for the next entry.
5. 手順2〜4を繰り返して、他のキーを学習します。
6. プレス ⌂ (Home) to save and exit, or the remote will exit automatically after 20 seconds.

工場出荷時のデフォルトステータスにリセット

押し続ける ⌂ （ホーム）と ← (Back) keys simultaneously for 3 seconds. The indicator will flash 3 times to confirm. Remote has successfully been reset to factory default status.

学習したキーをすべて削除

押し続ける ⌂ （ホーム）と ★ (Star) keys simultaneously for 3 seconds. The indicator will flash 3 times to confirm. All learned keys have been successfully deleted.

Image: Anderic RR-LC-16.2 Advanced Universal Operating Guide with programming details.

仕様

トラブルシューティング

• リモコンが応答しない: 電池が正しく取り付けられており、消耗していないことを確認してください。必要に応じて交換してください。
• 視線： The remote operates using infrared (IR) technology. Ensure there is a clear line of sight between the remote and your TV's IR receiver.
• 機能が正しくありません: If buttons are not performing as expected, verify compatibility with your specific Roku TV model. For non-Sharp Roku TVs or Roku Boxes, ensure the remote has been correctly programmed using the learning method.
• ショートカットキーが機能しない: While the remote is universal, some shortcut keys may differ from your original remote. Ensure your streaming apps are installed and updated on your Roku TV.

保証とサポート

Anderic products are designed for quality and reliability. For any issues or support inquiries, please refer to the manufacturer's official web公式サイトをご覧いただくか、カスタマーサービスまでお問い合わせください。保証請求のために購入時のレシートを保管してください。

AndericはDan's Electronics Etc., Inc.の登録商標です。All Rights Reserved. 当社はRokuと提携しておりません。RokuはRoku Inc.の登録商標です。

サポートについては、次のサイトをご覧ください。 www.anderic.com