1. はじめに
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Ferroli Divo 15L Horizontal Electric Water Geyser. Please read these instructions carefully before using the appliance and retain them for future reference. Proper installation and adherence to these guidelines will ensure optimal performance and longevity of your water heater.
2. 安全情報
重要な安全上の注意事項:
- Ensure the appliance is installed by a qualified technician in accordance with local regulations and safety standards.
- Do not operate the water heater if it is damaged or malfunctioning. Disconnect power immediately and contact service personnel.
- Always ensure the water heater is filled with water before switching on the power supply to prevent damage to the heating element.
- ブロックしたり、tしたりしないでくださいamper with the pressure relief valve. This valve is crucial for safety and must be checked regularly.
- 可燃物を給湯器から遠ざけてください。
- 子供が機器で遊ばないように監督する必要があります。
- The appliance must be properly grounded to prevent electric shock.
3 製品の特徴
- Blue Forever Heating Element: Designed for durability and efficient heating.
- Long Lasting Aluminum Anode: Provides enhanced protection against corrosion, extending tank life.
- Healthy Blue Silicon Enamel Coated Tank: Ensures hygiene and resistance to rust.
- High Pressure Rating - 8 Bar: Suitable for high-rise buildings and pressure pump applications.
- Environmental Friendly CFC Free Installation: Contributes to environmental protection.
- BEE 5 Star Rated Product*: Indicates high energy efficiency, reducing electricity consumption.
- Hi-tech Thermostat Cut-out: Provides additional safety by preventing overheating.
4. セットアップとインストール
The Ferroli Divo 15L water geyser is designed for horizontal wall mounting. Professional installation is highly recommended to ensure proper functioning and safety. Ensure the installation location is suitable to support the weight of the geyser when full of water and allows for easy access for maintenance.
Figure 1: Ferroli Divo Horizontal Water Geyser mounted on a tiled wall. Please note that while the image displays '25 Ltr', this manual pertains to the 15L model. The installation process is similar.
Installation Steps (Summary - consult a professional for detailed steps):
- Select a suitable wall location capable of supporting the geyser's weight.
- Mount the geyser horizontally using appropriate fasteners and brackets.
- 冷水入口パイプと温水出口パイプを接続します。すべての接続部が水密であることを確認してください。
- Install the pressure relief valve as per manufacturer guidelines.
- Fill the geyser with water by opening a hot water tap until water flows freely, indicating the tank is full.
- Connect the electrical supply to a properly grounded outlet.
- Verify all connections and ensure no leaks before powering on.
5. 操作手順
Once installed and filled with water, the Ferroli Divo 15L water geyser is ready for operation.
- 電源オン: Switch on the main power supply to the geyser. An indicator light (if present) will illuminate.
- 温度設定: Adjust the thermostat knob (if externally accessible) to your desired water temperature. For energy efficiency and safety, avoid setting the temperature too high.
- 加熱サイクル： The geyser will begin heating the water. The heating element will automatically switch off once the set temperature is reached. It will reactivate when the water temperature drops.
- 電源を切る： When not in use for extended periods, it is advisable to switch off the power supply to the geyser.
6. メンテナンス
Regular maintenance ensures the longevity and efficient operation of your water geyser.
- 排水： Periodically drain the tank to remove sediment buildup, especially in areas with hard water. Consult a professional for this procedure.
- Pressure Relief Valve Check: Manually operate the pressure relief valve at least once a year to ensure it is not blocked. Follow manufacturer's instructions for this check.
- 陽極棒検査： The aluminum anode rod should be inspected and replaced periodically (typically every 1-3 years, depending on water quality) to maintain corrosion protection. This should be done by a qualified technician.
- クリーニング： 間欠泉の外側を柔らかくてきれいな布で拭いてください。amp 布で拭いてください。研磨剤や溶剤は使用しないでください。
- プロフェッショナルサービス: It is recommended to have the geyser professionally serviced every 1-2 years.
7。 トラブルシューティング
カスタマーサービスに連絡する前に、view 一般的な問題と解決策は次のとおりです。
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| お湯が出ない | 電源が供給されていない、サーモスタットの設定が低すぎる、加熱要素が故障している。 | Check circuit breaker/fuse; adjust thermostat; contact service for element replacement. |
| お湯が足りない | Thermostat set too low; high hot water demand; sediment buildup. | Increase thermostat setting; reduce hot water usage; drain tank (professional service). |
| 水が熱すぎる | サーモスタットの設定が高すぎる、またはサーモスタットに障害がある。 | Lower thermostat setting; contact service for thermostat replacement. |
| 間欠泉からの漏れ | Loose pipe connections; faulty pressure relief valve; tank corrosion. | Tighten connections; check/replace pressure relief valve; contact service for tank inspection. |
| 異常な音 | タンク内に沈殿物が蓄積しています。加熱要素に障害があります。 | Drain tank (professional service); contact service for element inspection. |
For issues not listed or if solutions do not resolve the problem, please contact Ferroli customer support.
8. 仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | フェロリ |
| モデル | Divo 15L Horizontal Electric Water Geyser |
| 容量 | 15リットル |
| 取り付けタイプ | Wall (Horizontal) |
| 電源 | コード式電気 |
| 最大動作圧力 | 8 バー |
| 特集 | BEE 5 Star Rated Product*, Hi-tech Thermostat cut out for additional safety |
| 色 | 白 |
| 効率 | 高効率 |
| 製品寸法（長さx幅x高さ） | 37.5 x 38.7 x 60.3 cm |
| アイテム重量 | 12.2キロ |
| 含まれるコンポーネント | 1 間欠泉 |
| ASIN | B07M912GPB |
9. 保証とサポート
Ferroli products are manufactured to high-quality standards and come with a standard warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details.
For technical assistance, service requests, or to inquire about spare parts, please contact Ferroli customer support through their official webサイトまたは保証書に記載されている連絡先にお問い合わせください。
