1.製品オーバーview
The MST MT29 Custom Wheel is designed for automotive applications, offering a specific set of dimensions and characteristics for vehicle fitment. This manual provides essential information for the proper installation, maintenance, and care of your new wheel.
主な機能は次のとおりです。
- Wheel Size: 15x6.5 inches
- Bolt Pattern: 4x100
- Offset: 35mm
- Center Bore: 73.1mm
- カラー: マットブラック
図1: 前面 view of the MST MT29 Custom Wheel, showcasing its five-spoke design and matte black finish.
2. 仕様
| 属性 | 価値 |
|---|---|
| ブランド | 月曜日 |
| モデル | MT29 |
| 部品番号 | 29-56549-35-MBK |
| ホイールサイズ | 15x6.5インチ |
| オフセット | 35ミリメートル |
| ボルトパターン | 4x100 |
| Center Bore | 73.1ミリメートル |
| 色 | マットブラック |
| アイテム重量 | 20ポンド |
| リム幅 | 10インチ |
3. セットアップとインストール
Proper installation of your new wheels is crucial for safety and performance. It is highly recommended that wheel installation be performed by a qualified automotive technician. Incorrect installation can lead to serious injury or damage to your vehicle.
3.1 インストール前のチェック
- Verify that the wheel specifications (size, bolt pattern, offset, center bore) match your vehicle's requirements.
- Inspect each wheel for any signs of damage from shipping. Do not install damaged wheels.
- Ensure you have the correct lug nuts for these wheels. Tapered seat lug nuts are typically required for aftermarket wheels.
- Confirm that the hub bore of the wheel fits snugly over the vehicle's hub. If the wheel's center bore is larger than the vehicle's hub, hub centric rings are required to ensure proper wheel centering and prevent vibrations.
3.2 インストール手順（専門家によるインストールを推奨）
- 適切なジャッキスタンドを使用して、車両を安全に持ち上げて支えます。
- Remove the old wheel and tire assembly.
- Clean the vehicle's hub surface thoroughly to remove any rust, dirt, or debris.
- Mount the new wheel onto the hub, ensuring it sits flush. If using hub centric rings, install them first.
- Install lug nuts by hand, ensuring they thread smoothly. Do not use power tools for initial tightening.
- Lower the vehicle partially so the tire just touches the ground, preventing the wheel from spinning freely.
- Using a torque wrench, tighten the lug nuts in a star pattern to the vehicle manufacturer's specified torque settings. Refer to your vehicle's owner's manual for correct torque values.
- Fully lower the vehicle and remove jack stands.
- After driving approximately 50-100 miles, re-torque all lug nuts to ensure they remain properly tightened.
図2：背面 view of the MST MT29 Custom Wheel, highlighting the hub area and the 4x100 bolt pattern.
4. Operating and Usage Considerations
While wheels do not have "operating" functions in the traditional sense, proper usage and care are essential for their longevity and your safety.
- タイヤの取り付け: Always have tires mounted by a professional using proper equipment to avoid damaging the wheel finish or structure.
- バランス調整: Ensure wheels and tires are properly balanced after mounting to prevent vibrations and uneven tire wear.
- 道路の危険: Avoid driving over potholes, curbs, or other road hazards that could bend, crack, or otherwise damage the wheel.
- 耐荷重: Do not exceed the maximum load capacity of the wheel, which is designed for passenger car use.
5. メンテナンス
Regular maintenance will help preserve the appearance and integrity of your MST MT29 wheels.
5.1 クリーニング
- 定期的に中性洗剤と水でホイールを洗浄してください。
- Avoid harsh abrasive cleaners, acid-based cleaners, or stiff brushes, as these can damage the matte black finish.
- きれいな水で十分にすすぎ、水滴跡が残らないように柔らかい布で乾かしてください。
- For stubborn brake dust, use a pH-neutral wheel cleaner specifically designed for matte finishes.
5.2 検査
- 定期的にホイールを点検し、ひび割れ、曲がり、深い傷などの損傷の兆候がないか確認してください。
- Check lug nuts for proper torque at regular intervals, especially after tire rotations or any wheel removal.
- Ensure valve stems are intact and not leaking air.
6。 トラブルシューティング
This section addresses common issues that may arise with automotive wheels.
6.1 Vibrations After Installation
- 原因： Improper balancing, loose lug nuts, incorrect hub centering, or bent wheel.
- 解決：
- Re-check lug nut torque.
- Have wheels and tires re-balanced by a professional.
- Verify that hub centric rings are correctly installed if needed.
- Inspect wheels for damage.
6.2 Air Loss from Tire
- 原因： Puncture, faulty valve stem, improper tire bead seal, or cracked wheel.
- 解決：
- Inspect tire for punctures.
- Check valve stem for leaks.
- Have a professional inspect the tire bead and wheel for damage.
7. 保証とサポート
Specific warranty information for MST products is typically provided at the point of purchase or on the manufacturer's official webサイトでご確認ください。保証請求の際に必要となりますので、購入証明書を保管してください。
For technical support, installation questions, or warranty inquiries, please contact MST customer service or your authorized dealer. Contact information can usually be found on the MST official webサイトまたは製品の販売店を通じてご購入いただけます。
注記： Damage caused by improper installation, misuse, neglect, road hazards, or unauthorized modifications is typically not covered under warranty.
