1.製品オーバーview
The Abus D6PSN 35/45 BKN is a high-security double cylinder entry lock designed for enhanced door security. This cylinder features advanced protection mechanisms against common break-in methods, ensuring reliable performance and durability. It is engineered with non-corrosive internal components and a robust nickel-plated brass housing.
Image 1.1: Abus D6PSN Double Cylinder Entry Lock (Front View)
2. 主な特徴
- Reversible Keys: Includes 5 reversible keys for convenient handling, even in low light conditions.
- Anti-Break System (Pre-Snap/Anti-Snap): Features a programmed break system designed to prevent cylinder snapping attacks.
- Drilling Protection: Reinforced protection against drilling through cemented steel pins and stems.
- Anti-Picking: Equipped with 4 mushroom-shaped counter-pins to resist picking attempts.
- 耐久性のある構造: Made with non-corrosive internal parts and a nickel-plated brass housing.
- Security Elements: Incorporates 6 locking elements for enhanced security.
- Code Card: Supplied with a unique code card for secure key reproduction.
- 標準への準拠： Cylinder conforms to DIN EN 1303 and ISO 9001:2008 standards.
Image 2.1: Internal mechanism of the D6PSN cylinder, showing locking elements and anti-drilling pins.
Image 2.2: Diagram illustrating the pre-snap (anti-snap) design of the cylinder.
3. パッケージ内容
パッケージにすべてのアイテムが揃っていることを確認します。
- 1 x Abus D6PSN Double Cylinder Entry Lock (35/45 BKN)
- 5 x Reversible Keys
- 1 x Code Card for key reproduction
Image 3.1: Contents of the Abus D6PSN package, including the cylinder and keys.
画像3.2: クローズアップ view of a single reversible key provided with the Abus D6PSN cylinder.
4. 安全情報
- Always ensure the door is open when testing the lock mechanism to avoid accidental lock-outs.
- 鍵は安全な場所に保管し、識別情報をラベルに記入しないでください。
- For key reproduction, use only authorized locksmiths and present the provided code card.
- If you are unsure about any installation steps, consult a qualified locksmith.
5.インストールガイド
This section outlines the general procedure for installing or replacing a double cylinder lock. Specific door types and existing hardware may require slight variations.
- ドアの準備: Ensure the door is open and the existing cylinder (if any) is removed. Most cylinders are held in place by a single screw on the door's edge plate.
- Measure the Cylinder: The D6PSN 35/45 BKN cylinder has dimensions of 35mm on one side and 45mm on the other, measured from the center of the fixing screw hole to each end. Ensure these dimensions match your door's requirements.
- 新しいシリンダーを挿入します。 Insert the new Abus D6PSN cylinder into the mortise lock. The cam (the central rotating part) should align with the mortise lock mechanism.
- シリンダーを固定する: Insert the fixing screw through the door's edge plate and into the threaded hole in the cylinder. Tighten the screw until the cylinder is firmly held in place, but do not overtighten.
- テスト操作: With the door open, insert a key into both sides of the cylinder and turn it to ensure the mechanism operates smoothly. The key should turn freely and retract the latch/bolt.
- 閉じてテスト: Carefully close the door and test the lock from both the inside and outside to confirm proper functionality.
Image 5.1: Demonstrating the cylinder being aligned for insertion into a door lock.
6. 操作
To operate the Abus D6PSN double cylinder lock:
- Insert one of the provided reversible keys into the keyway on either side of the cylinder.
- Turn the key clockwise or counter-clockwise to engage or disengage the lock mechanism.
- Remove the key once the door is secured or unlocked.
重要な注意:
This double cylinder lock is designed such that a key inserted on one side will prevent a key from being turned on the other side. If a key is left in the inside of the lock, it will not be possible to operate the lock from the outside with another key. This is a common characteristic of standard double cylinder locks and not a defect.
7. メンテナンス
Proper maintenance ensures the longevity and smooth operation of your Abus D6PSN cylinder:
- クリーニング： Periodically wipe the exterior of the cylinder with a soft, dry cloth to remove dust and grime. Avoid abrasive cleaners or solvents.
- 潤滑: If the key turning becomes stiff, apply a small amount of graphite-based lubricant or a specialized lock lubricant into the keyway. Do not use oil-based lubricants as they can attract dust and cause blockages over time.
- キーケア: Avoid using bent or damaged keys, as this can damage the internal mechanism of the cylinder.
8。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| キーがスムーズに回らない、または固くなってしまう。 | Lack of lubrication, debris in keyway, bent key. | Apply graphite lubricant. Clean keyway with compressed air. Use an undamaged key. |
| Cannot unlock from outside when key is inside. | Standard operation of a double cylinder lock. | Remove the key from the inside of the lock to operate from the outside. This is not a malfunction. |
| Cylinder feels loose in the door. | Fixing screw is loose. | Tighten the fixing screw on the door's edge plate. Do not overtighten. |
9. 仕様
| ブランド | アブス |
| モデル名 | D6PSN 35/45 BKN (Pré-Snap) |
| 商品型番 | 0072634 |
| ロックタイプ | ダブルシリンダー |
| 特集 | Key Unlock, Anti-Snap, Anti-Drill, Anti-Pick |
| 材料 | Alloy Steel, Nickel-plated Brass Housing |
| 色 | Laiton Nickelé (Nickel-plated Brass) |
| 寸法（長さ×幅×高さ） | 3.15 x 0.39 x 1.3インチ（約80 x 10 x 33 mm） |
| サイズ | 35+45 mm (from center of fixing screw) |
| アイテム重量 | 0.36キログラム（12.7オンス） |
| 含まれるコンポーネント | 1 Cylinder, 5 Reversible Keys, 1 Code Card |
| 標準 | DIN EN 1303, ISO 9001:2008 |
10. 保証とサポート
Abus products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Abus website. For technical support or inquiries, please contact Abus customer service through their official channels.
詳しい情報と連絡先は、 AmazonのABUSストア.
