導入
The 8Bitdo Gbros. Wireless Adapter allows you to connect your original wired GameCube, NES Classic Edition, SNES Classic Edition, and Wii Classic controllers wirelessly to your Nintendo Switch or Windows PC. This adapter provides a seamless gaming experience with your favorite classic controllers.
含まれるもの
- GBros. Adapter
- ケーブルバンド
- USBケーブル
- 取扱説明書
設定
画像: 上 view of the 8Bitdo Gbros. Wireless Adapter, a blue oval-shaped device with green, red, gray, and yellow buttons.
1. バッテリーの取り付け
The Gbros. Adapter requires two AA batteries for wireless operation. To install the batteries:
- Open the battery compartment cover on the back of the adapter.
- 極性 (+/-) が正しいことを確認して、単三電池 2 本を挿入します。
- 電池カバーをしっかりと閉じてください。
Alternatively, the adapter can be powered via the included USB cable when connected to a power source or a compatible device.
2. コントローラーの接続
Plug your wired GameCube, NES Classic Edition, SNES Classic Edition, or Wii Classic controller into the appropriate port on the Gbros. Adapter.
画像: サイド view of the 8Bitdo Gbros. Wireless Adapter showing the GameCube controller port.
画像: サイド view of the 8Bitdo Gbros. Wireless Adapter showing the Micro USB port for power or connection.
3. Nintendo Switchとのペアリング
- Nintendo Switch で、HOME メニューに移動します。
- 選択 コントローラー、 それから グリップ/順序の変更.
- Slide the switch on the Gbros. Adapter to the S position (for Switch mode).
- Press and hold the yellow button on the Gbros. Adapter for a few seconds until the blue LED starts blinking rapidly.
- The adapter will pair with your Nintendo Switch. Once paired, the blue LED will become solid.
Image: A GameCube controller connected to the 8Bitdo Gbros. adapter, which is wirelessly paired with a Nintendo Switch in handheld mode, displaying Super Smash Bros. Ultimate.
Image: An SNES Classic controller connected to the 8Bitdo Gbros. adapter, wirelessly paired with a Nintendo Switch in handheld mode, displaying a retro-style game.
Image: A Wii Classic controller connected to the 8Bitdo Gbros. adapter, wirelessly paired with a Nintendo Switch in handheld mode, displaying Mario Kart.
4. Windows PCへの接続
- Slide the switch on the Gbros. Adapter to the X position (for X-input mode, compatible with Windows).
- Connect the Gbros. Adapter to your Windows PC via the included USB cable or pair wirelessly via Bluetooth.
- Your PC should recognize the adapter as an X-input device.
Image: Two 8Bitdo Gbros. adapters, one connected to a Nintendo Switch and another near a tablet, demonstrating multi-device compatibility.
5. ファームウェアのアップデート
It is recommended to regularly check for and install firmware updates for your Gbros. Adapter to ensure optimal performance and compatibility with the latest system updates. Visit the official 8Bitdo support web最新のファームウェアと更新手順については、こちらのサイトをご覧ください。
操作手順
Once paired, your connected wired controller will function wirelessly as a standard Nintendo Switch Pro Controller or an X-input controller on Windows.
- の 赤いボタン on the Gbros. Adapter acts as the 家 button for Nintendo Switch.
- の 緑のボタン on the Gbros. Adapter acts as the Screenshot/Capture button for Nintendo Switch.
- の S/X Switch allows you to toggle between Nintendo Switch mode (S) and Windows X-input mode (X).
For specific button mappings of your classic controller to the modern system, refer to the in-game controller settings or the 8Bitdo support documentation.
ビデオ: オーバーview of the 8Bitdo Gbros. Wireless Adapter, demonstrating its features and compatibility with wired GameCube and Classic Edition controllers for Nintendo Switch.
メンテナンス
- Keep the adapter clean and free from dust and moisture. Use a soft, dry cloth for cleaning.
- アダプタを極端な温度や直射日光にさらさないでください。
- Remove batteries if the adapter will not be used for an extended period to prevent leakage.
トラブルシューティング
- アダプタがペアリングされない: Ensure the adapter is in the correct mode (S for Switch, X for Windows) and that batteries are correctly installed or the USB cable is connected. Try re-pairing by holding the yellow button.
- コントローラーが応答しません: Check the connection between your wired controller and the Gbros. Adapter. Ensure the adapter is successfully paired with your console/PC.
- Lag or disconnection issues: Ensure the adapter's firmware is up to date. Reduce interference by moving closer to the console/PC or away from other wireless devices.
仕様
| 製品寸法 | 4.06 x 1.14 x 1.38インチ |
| アイテム重量 | 1.6オンス |
| メーカー | 8Bitdo |
| 商品型番 | 6922621500858 |
| バッテリー | 単三電池2本が必要です（含まれていません） |
| 対応デバイス | Nintendo Switch, Windows PC (X-input) |
| コネクタタイプ | Micro USB (for power/wired connection) |
保証とサポート
保証情報、テクニカルサポート、その他のサポートについては、8Bitdoの公式ウェブサイトをご覧ください。 webサイト： www.8bitdo.com.
