Tempur-Pedic TP4000 ファブリックタスクチェア 取扱説明書

導入

This manual provides detailed instructions for the assembly, operation, and maintenance of your Tempur-Pedic TP4000 Fabric Task Chair. Please read this manual thoroughly before use to ensure proper function and longevity of your product.

重要な安全情報

• Assembly may require tools and caution.
• 最大重量制限の242.5ポンドを超えないようにしてください。
• Be cautious when using armrests to avoid injury.
• Use the tilting mechanism with care to prevent falls.
• 使用前にすべてのコンポーネントがしっかりと固定されていることを確認してください。

セットアップと組み立て

While specific step-by-step assembly instructions are not provided here, general assembly for the Tempur-Pedic TP4000 chair typically involves:

1. 開梱: Carefully remove all components from the packaging. Verify all parts are present against the included parts list (not provided in this manual).
2. ベースアセンブリ: 5つ星ベースにキャスターを取り付けます。
3. Gas Lift Installation: 組み立てたベースの中央にガスリフトシリンダーを挿入します。
4. シート機構: Secure the seat mechanism to the underside of the seat cushion using the provided hardware.
5. アームレストアタッチメント: Attach the armrests to the seat assembly. Ensure they are oriented correctly.
6. 背もたれアタッチメント: 背もたれをシートアセンブリに接続します。
7. 最終組立: 組み立てたシートと背もたれをガスリフトシリンダーの上に置きます。
8. 検査： Before first use, inspect all connections to ensure they are tight and secure.

画像: 正面 view of the assembled Tempur-Pedic TP4000 Fabric Task Chair. This image shows the overall design and appearance of the chair.

運営と調整

The Tempur-Pedic TP4000 chair offers multiple adjustment features to customize your seating experience for optimal comfort and support.

• 空気圧式シート高さ調整:

  Locate the lever on the right side, beneath the seat. Pull the lever upwards to raise the seat. While seated, pull the lever upwards to lower the seat. Release the lever at the desired height.

• アームレストの調整:

  The armrests are width and height adjustable. To adjust height, locate the button or lever on the side of the armrest support. Press it and move the armrest up or down. To adjust width, the armrests can be moved outward to accommodate larger frames. Specific mechanism details may vary, refer to visual cues on your chair.

• Tilt Control Options:

  This chair features a range of tilt-control options including independent pan tilt, back tilt, and a forward tilt option. Levers located beneath the seat control these functions. Experiment with each lever to find your preferred recline and tilt settings. One lever typically locks/unlocks the tilt, while another adjusts the tension.

  

  画像: クローズアップ view of the adjustment levers located on the left side beneath the seat. These levers control various chair functions such as tilt and recline.

  

  画像: クローズアップ view of the adjustment levers located on the right side beneath the seat. These levers typically control seat height and tilt lock.

• 背もたれの高さ調整:

  The backrest can be adjusted in height, often through a 5-step ratcheting assembly. To adjust, lift the backrest firmly upwards until it clicks into the next desired position. To reset to the lowest position, lift it to its highest point, then it will drop down. Then you can re-adjust upwards.

メンテナンス

Proper maintenance ensures the longevity and appearance of your Tempur-Pedic TP4000 chair.

• クリーニング： The fabric upholstery should be spot cleaned. Use a mild detergent and a damp cloth to gently clean soiled areas. Avoid harsh chemicals or abrasive cleaners.
• キャスター： キャスターに髪の毛やゴミが詰まっていないか定期的に点検し、スムーズな回転を妨げる原因となる可能性があります。必要に応じて清掃してください。
• 留め具: Routinely check all screws and bolts to ensure they are tight. Tighten any loose fasteners to maintain stability and safety.

トラブルシューティング

椅子に問題が発生した場合は、次の一般的なトラブルシューティングのヒントを参照してください。

• 椅子が沈み込む、または高さが保てない:

  This typically indicates an issue with the gas lift cylinder. Contact customer support for assistance or replacement parts.

• Difficulty Adjusting Levers:

  Ensure no weight is applied to the seat or backrest when attempting to adjust. Check for any obstructions around the levers. If levers remain stiff, a small amount of silicone lubricant may be applied to moving parts, avoiding contact with fabric.
• 椅子がぐらついたり不安定に感じたりする場合:

  Check all assembly bolts and screws, especially those connecting the seat to the mechanism and the base to the gas lift. Tighten any loose connections. Ensure the casters are fully inserted into the base.

• キャスターがスムーズに回転しない:

  Remove any hair, dust, or debris wrapped around the caster wheels. Clean the wheels and axles. If the issue persists, casters may need replacement.

仕様

Image: Diagram showing the dimensions of the Tempur-Pedic TP4000 Fabric Task Chair, including height, depth, and width.

保証とサポート

For warranty information or technical support, please refer to the documentation included with your purchase or contact Tempur-Pedic customer service directly. Keep your proof of purchase for warranty claims.

For further assistance, you may visit the official Tempur-Pedic store online: Tempur-Pedic Store