導入
The Anderic RR-XB-01 is a media remote designed for Xbox One, Xbox One S, and Xbox One X consoles. It provides convenient control for entertainment functions, eliminating the need to use a game controller for media playback. This remote features pre-programmed volume and mute controls for LG and Vizio TVs, and includes a learning function for other soundbars or TVs. It comes with a wrist strap and a screw for the battery cover to ensure secure handling.
設定
1. バッテリーの取り付け
The remote requires 2 AAA batteries (sold separately). To install:
- リモコン裏の電池カバーを外します。
- 正しい極性 (+/-) を確認して、単 4 電池 2 本を挿入します。
- Replace the battery cover and secure it with the provided screw for added stability.

図1: 前面 view of the Anderic RR-XB-01 remote, showing button layout.
2. Initial Xbox Pairing
The RR-XB-01 remote is designed to work with Xbox One, Xbox One S, and Xbox One X consoles right out of the package. No manual pairing is typically required for basic Xbox media control functions.
3. TV/Soundbar Volume Control (Pre-programmed & Learning)
The remote's volume and mute buttons are pre-programmed for many LG and Vizio TVs. If your TV or soundbar is not an LG or Vizio model, or if the pre-programmed codes do not work, you can use the learning function:
- Place the RR-XB-01 remote and your original TV/soundbar remote on a flat surface, facing each other, about 1-2 inches apart.
- を押し続けます [TV Power] button on the RR-XB-01 until the LED indicator lights up solid.
- Press the button on the RR-XB-01 you wish to program (e.g., [Volume Up]). The LED will flash slowly.
- Press and hold the corresponding button on your original TV/soundbar remote (e.g., [Volume Up]). The LED on the RR-XB-01 will flash rapidly to confirm successful learning.
- Repeat for other buttons like [音量を下げる] そして [ミュート].
- を押す [TV Power] button on the RR-XB-01 again to exit learning mode.
4. Wrist Strap Attachment
Attach the included wrist strap to the designated loop at the bottom of the remote for secure handling and to prevent accidental drops.
操作手順
The Anderic RR-XB-01 remote provides intuitive control over your Xbox media experience. Below is a guide to the main buttons and their functions:

図2:詳細 view of the remote with numbered button functions.
- 1. Power / Home / Guide: Turns the Xbox on/off, returns to the home screen, or opens the Guide menu.
- 2.ミュート: 音声をミュートまたはミュート解除します。
- 3. View: Opens map, stats, or secondary menu (app-dependent).
- 4.メニュー: Pause, main menu, or options (app-dependent).
- 5. Up/Down/Left/Right: Navigates menus, item selection, and special functions (app-dependent).
- 6. OK: Confirms selection, plays/pauses media, or selects items.
- 7.音量を下げる: オーディオの音量を下げます。
- 8.音量を上げる: オーディオの音量を上げます。
- 9. Media Rewind: メディアの再生を巻き戻します。
- 10. Media Play/Pause: メディアの再生を再生または一時停止します。
- 11. Media Fast Forward: メディアの再生を早送りします。
- 12. Media Skip Back: Skips to the previous track or chapter.
- 13. Media Stop/Exit: Stops media playback or exits current application.
- 14. Media Skip Forward: 次のトラックまたはチャプターにスキップします。
- 15. X (Blue): Reload, interact, use, or special action (game-dependent).
- 16. Y (Yellow): Switches weapon, opens inventory, or secondary action (game-dependent).
- 17. A (Green): Confirms, jumps, or selects (primary action button).
- 18. B (Red): Cancels, goes back, or exits (secondary action).
- 19. Tassel: Use for wrist strap or for storage.
一般的な使用上のヒント
- The remote stays on, eliminating the need to constantly turn on an Xbox One controller for media control.
- The Guide button provides one-touch, quick access to all your favorites in one place.
- Control video playback for Blu-ray movies and streaming video on Xbox One.
メンテナンス
バッテリー交換
When the remote's performance degrades or the LED indicator no longer lights up, it's time to replace the batteries. Follow the battery installation steps in the Setup section.
クリーニング
To clean the remote, use a soft, dry cloth. Do not use liquid cleaners or abrasive materials, as these may damage the remote's surface or internal components.
トラブルシューティング
Remote Not Responding to Xbox
- バッテリーを確認してください: 電池が正しく取り付けられており、消耗していないことを確認してください。必要に応じて交換してください。
- 視線: The remote uses infrared (IR) technology. Ensure there is a clear line of sight between the remote's emitter and the Xbox's IR receiver. Obstructions can block the signal.
- 距離: Ensure you are within an effective range of the Xbox's IR receiver.
- Xbox IR Receiver: Confirm the Xbox's IR receiver is not blocked or covered.
TV/Soundbar Volume Control Not Working
- Verify Pre-programmed Compatibility: If your TV/soundbar is not an LG or Vizio model, the pre-programmed codes may not work.
- Use Learning Function: Attempt to program the volume and mute buttons using the learning function with your original TV/soundbar remote, as described in the Setup section.
- Line of Sight (TV/Soundbar): Ensure a clear line of sight to your TV or soundbar's IR receiver when using the learned functions.
仕様
| 特徴 | 詳細 |
|---|---|
| モデル番号 | RR-XB-01 |
| 製品寸法 | 6 x 2 x 1インチ |
| アイテム重量 | 0.01オンス |
| 電池が必要 | 単4電池2本(別売) |
| 互換性 | Xbox One、Xbox One S、Xbox One X |
| 特集 | Ergonomic, Learning Function |
| 色 | 黒 |
| サポートされるデバイスの最大数 | 1 (Xbox + TV/Soundbar via learning) |
保証情報
For specific warranty details regarding your Anderic RR-XB-01 remote, please refer to the documentation included with your purchase or contact Anderic customer support directly. Anderic is a legal trademark of Dan's Electronics Etc., Inc.
サポート
If you require further assistance or have questions about your Anderic RR-XB-01 Xbox Media Remote, please visit the official Anderic website or contact their customer support. Anderic is a US-based company dedicated to providing quality remote control solutions.
訪問することができます AmazonのAndericストア 詳しい情報と製品については、こちらをご覧ください。





