Invacare TREX28RFP

Invacare Tracer EX2 Manual Folding Wheelchair User Manual

Model: TREX28RFP | Brand: Invacare

1.製品オーバーview

The Invacare Tracer EX2 Standard Manual Folding Wheelchair is designed for adults requiring mobility assistance. It features a robust carbon steel frame and a dual-axle design for adjustable seat-to-floor heights. This wheelchair combines durability with user comfort, making it suitable for long-term use.

主な特徴:

  • Robust Carbon Steel Frame: Ensures strength and longevity, supporting users up to 250 lbs.
  • Dual-Axle Design: Allows for easy conversion to a hemi seat, with adjustable seat-to-floor heights from 17.5" to 19.5".
  • Durable Upholstery: Features dual-embossed vinyl seat and back with heavy-duty inner liners to prevent stretching.
  • "No Flex" Wheels: Urethane rear tires mounted on "no flex" wheels provide smooth and reliable movement.
  • Removable Full-Length Padded Armrests: Enhance comfort and support, aiding in user transfers.

ビデオの説明: このビデオでは360度の view of the Invacare Tracer EX2 Wheelchair, highlighting its full-length arms and overall design. It demonstrates the wheelchair from various angles, showcasing its features and construction.

2. セットアップと組み立て

The Invacare Tracer EX2 wheelchair is designed for straightforward setup. While it often arrives largely pre-assembled, some adjustments and component attachments may be necessary before first use.

2.1 車椅子の展開

  1. 車椅子が平らで安定した場所にあることを確認してください。
  2. Grasp the handrims and push outwards to open the frame.
  3. Press down firmly on the seat rails until the seat is fully flat and locked into position.

2.2 Adjusting Seat Height (Dual-Axle)

The dual-axle design allows for two seat-to-floor height settings: 19.5" (standard) and 17.5" (hemi). To adjust:

  1. Locate the axle plate on the rear wheels.
  2. Remove the axle bolt and reposition it to the desired height setting.
  3. Ensure both sides are adjusted equally and securely fastened.
フロント view of Invacare Tracer EX2 wheelchair showing seat and back width of 18 inches and adjustable seat height options of 17.5 or 19.5 inches. Quick-release brackets for legrests/footrests are also visible.

画像の説明: フロント view of the Invacare Tracer EX2 wheelchair. Labels indicate a seat and back width of 18 inches and an adjustable seat height of 17.5 or 19.5 inches. Quick-release brackets for legrests or footrests are also highlighted.

2.3 Attaching Armrests

The wheelchair comes with removable full-length padded armrests. To attach:

  1. Align the armrest posts with the receptacles on the wheelchair frame.
  2. Press down firmly until the armrests click securely into place.
  3. To remove, press the release button (if present) and lift the armrest.
側 view of Invacare Tracer EX2 wheelchair highlighting full-length removable arms and 'no flex' urethane rear wheels. A note indicates that footrests/legrests are not included with this listing.

画像の説明: サイド view of the Invacare Tracer EX2 wheelchair. Key features such as the full-length removable arms and the "no flex" urethane rear wheels are highlighted. A textual note clarifies that footrests/legrests are not included with this specific listing.

2.4 Footrests/Legrests

Please note that front riggings (footrests/legrests) are not included with this specific wheelchair model and must be acquired separately if needed. The wheelchair is equipped with quick-release brackets for easy attachment of compatible Invacare legrests or footrests without tools.

3. 車椅子の操作

Proper operation ensures safety and comfort for the user.

3.1 Self-Propelling

Users can propel the wheelchair by grasping the handrims on the large rear wheels and pushing forward. The durable handrims provide a good grip for efficient movement.

3.2 Using the Wheel Locks

Always engage the wheel locks when the wheelchair is stationary, especially during transfers or when parking on an incline. To engage, push the lock levers forward until they firmly secure the wheels. To release, pull the levers back.

3.3 Assisting a User

When pushing the wheelchair, use the padded handles located on the back of the chair. Ensure the user's feet are properly positioned on the footrests (if installed) and that the wheel locks are disengaged before moving.

3.4 Transfers

The removable full-length padded armrests can be helpful during transfers. They provide a stable leverage point for users when moving to or from another chair or bed. Ensure wheel locks are engaged before attempting any transfer.

4. メンテナンスとケア

Regular maintenance will extend the life and ensure the safe operation of your Invacare Tracer EX2 wheelchair.

4.1 クリーニング

  • フレーム: Wipe the carbon steel frame with a damp 布と中性洗剤で拭き取ります。完全に乾かしてください。
  • 室内装飾: The dual-embossed vinyl seat and back can be cleaned with a damp 布と中性洗剤を使用してください。素材を傷める可能性のある強力な化学薬品は使用しないでください。
  • ホイール: Clean the urethane tires and wheels regularly to remove dirt and debris.

4.2回の検査

次のコンポーネントを定期的に検査してください。

  • フレーム: Check for any signs of damage, cracks, or loose connections. The 14-gauge cross braces contribute to the wheelchair's structural integrity.
  • ホイールとタイヤ: Ensure tires are free from excessive wear and that wheels spin freely without wobbling.
  • ホイールロック: Verify that wheel locks engage securely and hold the wheels firmly.
  • アームレスト: Check that armrests are securely attached and padding is intact.
  • 留め具: すべてのボルト、ネジ、留め具がしっかりと締まっていることを確認してください。締めすぎないでください。
後方 view of Invacare Tracer EX2 wheelchair highlighting the durable frame made of heavy-duty carbon steel that supports up to 250 lbs, and the dual embossed padded vinyl seat and back upholstery.

画像の説明: 後部 view of the Invacare Tracer EX2 wheelchair. The image highlights the durable frame, constructed from heavy-duty carbon steel, capable of supporting up to 250 lbs. It also showcases the dual-embossed padded vinyl seat and back upholstery.

5。 トラブルシューティング

This section addresses common issues you might encounter with your wheelchair.

5.1 Wheelchair Does Not Roll Smoothly

  • 障害物の確認: Ensure no debris is caught in the wheels or casters.
  • ホイールの検査: Verify that the wheels are properly aligned and not bent.
  • Axle Adjustment: Confirm that the dual-axle is correctly set and secured on both sides.

5.2 Wheel Locks Not Engaging Properly

  • Adjust Locks: The wheel locks may need adjustment. Consult a qualified technician if you are unsure how to adjust them.
  • 摩耗を検査します: Check the lock mechanisms for wear or damage.

5.3 折りたたみ/展開の難しさ

  • 障害物を取り除く: Ensure no items are preventing the frame from collapsing or expanding fully.
  • 潤滑: Moving parts of the folding mechanism may require light lubrication.
側 view of the Invacare Tracer EX2 wheelchair in a folded position, showing a compact 13-inch folded width for easy travel and storage. The image also notes that it is a standard wheelchair weighing 36 lbs without legrests.

画像の説明: サイド view of the Invacare Tracer EX2 wheelchair shown in its folded configuration. The image highlights its compact 13-inch folded width, designed for convenient travel and storage. Text also indicates that this standard wheelchair weighs 36 lbs without legrests.

If you experience persistent issues not covered here, please contact Invacare customer support.

6. 仕様

特徴詳細
モデル番号TREX28RFP
材料Carbon Steel Frame, Dual-Embossed Vinyl Upholstery
シート幅18インチ
シートの奥行き16インチ
背面の高さ16インチ
Adjustable Seat-to-Floor Height17.5インチから19.5インチ
全高35.88インチ
折りたたんだ幅12.25インチ
車輪の高さ24インチ
製品重量37 lbs (without front riggings)
重量容量250ポンド
パッケージ寸法36.8 x 33 x 13.9インチ
メーカーインヴァケア
初回利用可能日11年2008月XNUMX日

7. 保証とサポート

Invacare is committed to providing quality products. For specific warranty details regarding your Tracer EX2 wheelchair, please refer to the documentation included with your purchase or contact Invacare directly.

カスタマーサポート:

If you have questions, require assistance, or need to report an issue, please contact Invacare customer service:

  • 電話: 1 (800) 333-6900
  • Webサイト: www.invacare.com (for general information and product support)

関連文書 - TREX28RFP

前view Invacare Tracer SX5シリーズ車椅子 - 軽量で多用途なモビリティソリューション
Discover the Invacare Tracer SX5 and Tracer SX5 Recliner wheelchairs. Lightweight, durable, and designed for comfort and ease of use, these manual wheelchairs offer multiple configurations and features for various user needs. Learn about specifications, dimensions, and available options.
前view インヴァケア クシャル Champイオン折りたたみ車椅子 - 構成と仕様
Invacare Küschall Chの詳細な製品情報、構成オプション、仕様ampイオン折りたたみ式車椅子。フレームタイプ、シート調整、背もたれオプション、ホイール、アクセサリーなど、お好みの移動ソリューションをお選びいただけます。
前view Invacare Tracer IV 車椅子 - 耐久性がありメンテナンスの手間が少ない移動補助具
Discover the Invacare Tracer IV Wheelchair, designed for active individuals needing a strong, reinforced heavy-duty frame. Features include dual axle positions, durable carbon steel frame, and various tire options for superior performance. Suitable for users up to 450 lbs.
前view インヴァケア クシャル ChampイオンSK 2.0処方箋フォームと仕様
Invacare Kuschall Chの詳細な処方箋フォームと仕様ampion SK 2.0 手動車椅子の詳細(機能、寸法、オプション、価格など)
前view Invacare Action NG車椅子 - 機能、仕様、オプション
Invacare Action NG車椅子の詳細情報(機能、製品特性、利用可能なオプション、技術仕様、価格など) このガイドでは、車椅子をカスタマイズするための様々な構成、シートオプション、アームレスト、フットレスト、アクセサリーについて説明しています。
前view インヴァケア クシャル Champion 2.0 手動アクティブ車椅子 - 構成と価格表
Invacare Küschall Chの包括的な構成ガイドと価格表ampion 2.0 手動アクティブ車椅子。フレーム、シート、背もたれ、ホイール、アクセサリーなど、幅広いカスタマイズオプションをご用意しています。