1。 オーバーview
の AMP Research PowerStep is an automatic, electric-powered running board system designed to provide convenient vehicle access. It extends instantly when the vehicle door is opened and retracts out of sight when the door closes, enhancing ground clearance, aerodynamics, and overall vehicle appearance. The system is constructed with die-cast aluminum alloy components and precision stainless steel pivot pins for stability and durability.
主な特徴:
- 自動展開: Steps automatically extend when doors open and retract when doors close.
- 堅牢な構造: Engineered with 6-inch wide, cab-length step boards capable of supporting a 600 lb. load, featuring heavy-duty stainless steel pivot pins.
- 安全性の強化: Features a textured, slip-resistant stepping surface for optimal traction in various weather conditions. Includes onboard LED lighting and 'Anti-Pinch' technology to prevent obstruction.
- 耐久性のある素材: Made in the USA with global materials, utilizing corrosion-resistant aluminum.
図1: AMP Research PowerStep system components.
2. 部品リスト（箱の中身）
インストールを開始する前に、すべてのコンポーネントが揃っていることを確認してください。
- Boards (2)
- Hardware (various bolts, nuts, washers)
- ワイヤハーネス
- Installation Instructions (refer to manufacturer's official guide for detailed steps)
3. セットアップとインストール
のインストール AMP Research PowerStep is designed to be vehicle-specific and includes all necessary hardware. For detailed, step-by-step instructions, always refer to the official installation guide provided with your product. The general process involves:
- 準備： Ensure the vehicle is on a level surface and safely supported. Gather all necessary tools.
- 取り付けブラケット: Attach the motor and linkage assemblies to the vehicle's frame using the provided hardware.
- 配線： Route the wiring harness from the motors to the vehicle's power source and interior control module. This typically involves connecting to the battery and door trigger wires.
- Step Board Attachment: Secure the PowerStep boards to the linkage assemblies.
- 最終調整: Test the steps for proper deployment and retraction. Ensure all connections are secure and wiring is neatly routed and protected.
インストールリソース:
For visual guidance, the following seller-provided videos demonstrate installation processes for similar running boards on Jeep Wrangler JL models:
Video 1: Installation video for Wrangler JL 3 steps running boards. Demonstrates general installation steps including bracket mounting and wiring. (Source: BluePhoenix-Auto)
Video 2: OEDRO running boards installation for 2018-2024 Jeep Wrangler JL 4 Door. Provides an overview of the installation process. (Source: OEDRO Direct)
Video 3: 3 steps running boards for Wrangler. Shows the steps in action and some installation aspects. (Source: BluePhoenix-Auto)
4. 操作手順
の AMP Research PowerStep は、車両のドアの動作に基づいて自動的に作動します。
- 展開: When a vehicle door is opened, the PowerStep will automatically extend to a comfortable stepping height.
- 撤回: After a slight delay once the vehicle doors are closed, the PowerStep will retract and tuck tightly under the cab.
- LED照明: Integrated LED lights illuminate the step and the ground below when the steps are deployed, enhancing visibility in low-light conditions.
- 挟み込み防止テクノロジー: The system is equipped with 'Anti-Pinch' technology, which is designed to stop the step from operating if an obstruction is detected during deployment or retraction, preventing injury or damage.
Figure 2: PowerStep deployed for easy vehicle access.
5. メンテナンス
お客様の製品の寿命と最適なパフォーマンスを保証するために AMP Research PowerStep, regular maintenance is recommended:
- クリーニング： Periodically clean the step surfaces and linkage mechanisms to remove dirt, mud, and debris. Use mild soap and water, avoiding harsh chemicals that could damage the finish.
- 潤滑: Inspect the pivot points and moving parts for smooth operation. Lubricate as recommended in the official product manual to prevent stiffness or wear.
- 検査： Regularly check all mounting hardware and electrical connections for tightness and signs of wear or corrosion. Tighten any loose fasteners.
6。 トラブルシューティング
If you encounter issues with your PowerStep, consider the following common troubleshooting steps:
- 展開/引き込みされない手順: Check for any obstructions that might be triggering the 'Anti-Pinch' safety feature. Inspect electrical connections for looseness or corrosion. Ensure the vehicle battery has sufficient charge.
- Uneven Operation: Verify that all mounting hardware is securely tightened. Check for any debris or damage to the linkage mechanisms.
- LED ライトが動作しない: Inspect the wiring to the LED lights for damage or loose connections.
If problems persist, consult the comprehensive troubleshooting section in your official AMP Research PowerStep installation guide or contact customer support.
7. 仕様
| 属性 | 詳細 |
|---|---|
| ブランド | AMP 研究 |
| モデル番号 | 75132-01A |
| 材料 | アルミニウム |
| 外装仕上げ | 塗装済み（ブラック） |
| 商品の寸法 (長さ x 幅 x 高さ) | 73 x 11.5 x 10.5インチ |
| アイテム重量 | 41.9 ポンド (19.05 キログラム) |
| 重量制限 | 600 ポンド |
| 車両サービスタイプ | Jeep (Wrangler JL 4-Door, 4XE & Rubicon 392) |
| 自動車適合タイプ | 車両固有の適合 |
| 欧州連合 | 815410014000 |
8. 保証とサポート
保証：
AMP Research provides a hassle-free, comprehensive 5-year/60,000-mile warranty for the PowerStep. Please refer to the official warranty documentation included with your product for full terms and conditions.
カスタマーサポート:
さらに詳しいサポート、技術サポート、保証請求については、 AMP Research customer service directly. Contact information can typically be found in your product packaging or on the official AMP 研究 webサイト。
