導入
The Radial Catapult MINI TX is a compact and robust 4-channel analog audio snake transmitter designed to send balanced audio signals over a standard Cat 5 or Cat 6 Ethernet cable. This device, when paired with a Catapult MINI RX unit (sold separately), provides a convenient and cost-effective solution for transmitting multiple audio channels over long distances, utilizing existing network infrastructure or dedicated Cat cable runs. Its passive design ensures high-fidelity audio transmission without the need for power.
Figure 1: Radial Catapult MINI TX unit, angled view, highlighting its compact design and branding.
主な特徴
- 4チャンネルオーディオ伝送: Supports four balanced analog audio signals.
- Cat 5/6 Connectivity: Utilizes standard Ethernet cables for signal transmission, offering flexibility and cost savings.
- パッシブ操作: Requires no external power, simplifying setup and increasing 信頼性。
- コンパクトで耐久性のあるデザイン: Housed in a rugged steel enclosure, suitable for professional use.
- XLR and RJ45 Connectors: Standardized connectors for easy integration into existing audio systems.
セットアップ手順
Setting up the Catapult MINI TX is straightforward. Ensure you have a Catapult MINI RX unit and a shielded Cat 5 or Cat 6 Ethernet cable of appropriate length for your application.
- コンポーネントを識別する: Locate the Catapult MINI TX (transmitter) and Catapult MINI RX (receiver) units. The TX unit typically has female XLR inputs, and the RX unit has male XLR outputs.
- Connect Audio Sources to TX: Connect your balanced audio sources (e.g., microphones, preamps, mixing console outputs) to the four female XLR inputs on the Catapult MINI TX unit. Each input corresponds to a specific channel.
- イーサネットケーブルを接続します: Connect one end of a shielded Cat 5 or Cat 6 Ethernet cable to the RJ45 connector on the Catapult MINI TX unit.
- Connect RX Unit: Connect the other end of the Ethernet cable to the RJ45 connector on the Catapult MINI RX unit.
- Connect Audio Destinations from RX: Connect the male XLR outputs of the Catapult MINI RX unit to your audio destinations (e.g., mixing console inputs, audio interface inputs, powered speakers).
- 接続を確認します。 Double-check all cable connections to ensure they are secure and correctly routed.
Figure 2: Catapult MINI TX with four XLR cables connected, illustrating the input setup.
図3: 終了 view of the Catapult MINI TX, highlighting the RJ45 and XLR connector ports.
操作手順
Once the Catapult MINI TX and RX units are connected, operation is automatic due to their passive design. No power or configuration is required.
- 信号フロー: Audio signals from your sources connected to the TX unit's XLR inputs will be transmitted over the Cat 5/6 cable to the RX unit, and then output via its XLR connectors.
- チャネルマッピング： Each XLR input on the TX unit corresponds directly to an XLR output on the RX unit. Ensure your audio sources and destinations are connected to the correct channels.
- ケーブル長さ: While Cat 5/6 cables can transmit signals over significant distances, extremely long runs (e.g., hundreds of feet) may introduce slight signal degradation. Test your setup with the intended cable length to ensure optimal performance.
- Shielded Cable Requirement: Always use shielded Cat 5 or Cat 6 cable for reliable and noise-free operation. Unshielded cables may introduce interference.
メンテナンス
The Radial Catapult MINI TX is designed for durability and requires minimal maintenance.
- クリーニング： 本体の外装を清掃する際は、柔らかく乾いた布をご使用ください。研磨剤入りの洗剤や溶剤は使用しないでください。
- ストレージ： Store the unit in a dry environment, away from extreme temperatures and direct sunlight, when not in use.
- ケーブル検査: Periodically inspect your Cat 5/6 and XLR cables for any signs of wear, damage, or corrosion. Replace damaged cables immediately.
- コネクタのお手入れ: Keep the XLR and RJ45 connectors free of dust and debris.
トラブルシューティング
If you encounter issues with your Catapult MINI TX, consider the following troubleshooting steps:
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| 音声信号なし |
|
|
| Hum or noise in audio |
|
|
| 断続的な信号 |
|
|
仕様
| 特徴 | 詳細 |
|---|---|
| モデル | R800 8028 |
| チャンネル | 4 (balanced analog audio) |
| Connector Type (Audio) | XLR Female (Input) |
| Connector Type (Data) | RJ45 |
| ケーブル要件 | Shielded Cat 5 or Cat 6 Ethernet cable |
| 手術 | Passive (no power required) |
| 寸法（長さ×幅×高さ） | 6.3 x 4.3 x 3インチ（約） |
| 重さ | 1.06ポンド（おおよそ） |
| 建設資材 | 鋼鉄 |
| 色 | 青 |
保証とサポート
Radial Engineering products are built to high standards and are backed by a limited warranty. For specific warranty terms and conditions, please refer to the official Radial Engineering website or contact their customer support directly. For technical assistance, troubleshooting beyond this manual, or service inquiries, please visit the Radial Engineering support page or contact their authorized service centers.
正式 Webサイト： www.radialeng.com
