導入
This manual provides comprehensive instructions for the safe and effective use, setup, operation, and maintenance of your Shimano Beastmaster 10000 XB fishing reel. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.
設定
1. リールをロッドに取り付ける
Align the reel foot with the reel seat on your fishing rod. Securely tighten the reel seat nut until the reel is firmly attached and does not wobble. Ensure the reel is oriented for right-hand use as specified.
2. 釣り糸を巻く
- ベイルアームを開きます。
- アーバーノットまたは同様の安全な結び方を使用して、釣り糸をスプールに結びます。
- ベイルアームを閉じます。
- Maintain slight tension on the line as you reel it onto the spool. Ensure the line lays evenly across the spool.
- Fill the spool to approximately 1/8 inch (3mm) from the rim to prevent line overflow and tangles.
Figure 1: The Shimano Beastmaster 10000 XB fishing reel. This image highlights the reel's black and silver design, including the large capacity spool, ergonomic handle, and robust body construction, ready for line spooling.
操作手順
1. キャスティング
- ロッドとリールを楽に持ちます。
- ベイルアームを開きます。
- Hold the line against the rod with your index finger.
- ロッドを前方に振り、asing the line with your finger at the desired point in the cast.
- Close the bail arm manually or by turning the handle once the lure or bait hits the water.
2. 取得
Turn the handle clockwise (for right-hand retrieve) to retrieve the line. The reel's smooth mechanism ensures efficient line retrieval, approximately 100 cm per handle turn. Adjust your retrieve speed based on the fishing technique and target species.
3. Drag Adjustment
The drag system is located on the front of the spool. Turn the drag knob clockwise to increase drag tension and counter-clockwise to decrease it. Set the drag to approximately one-third of your line's breaking strength. This allows the line to pay out under heavy load, preventing line breakage and protecting your rod.
メンテナンス
1.使用後の清掃
- After each use, especially in saltwater, rinse the reel with fresh water to remove salt, sand, and debris. Do not submerge the reel.
- リールを柔らかい布で拭いて乾かします。
2. 潤滑
- Periodically apply a small amount of reel oil to moving parts such as the bail arm pivot points and handle shaft.
- Apply reel grease to the main gear and other internal components if performing a deeper service. Consult a professional if unsure.
3. ストレージ
Store your reel in a dry, cool place away from direct sunlight and extreme temperatures. Loosen the drag completely before storage to prolong the life of the drag washers.
トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| Line tangles or loops | Overfilled spool, line twist, improper casting technique. | Reduce line on spool, remove line twist, practice casting. |
| Stiff handle rotation | Lack of lubrication, dirt/debris in gears. | 可動部分を洗浄し、注油します。 |
| ドラッグが滑ったり不安定になったりする | Worn or dirty drag washers, improper drag setting. | Clean or replace drag washers, adjust drag correctly. |
仕様
- モデル名: Beastmaster 10000 XB
- ブランド： シマノ
- モデル番号: 0022255218221
- 色： ブラック、シルバー
- サイズ： 10000
- 手の向き: 右手
- 材料： Graphite Aluminum
- 特集: 軽量
- 釣りテクニック: Surfcasting
- ハンドル材質: アルミニウム
- ベアリング材質: ステンレス鋼
- 1ターンあたりのライン回収: 100センチ
- 製品寸法: 21.9 x 12.8 x 18.1 cm
- 商品の重量: 100グラム
保証とサポート
This product comes with a manufacturer's warranty, typically 2 or 3 years, as indicated by the manufacturer. For specific warranty details, claims, or technical support, please refer to the official SHIMANO web購入サイトをご覧いただくか、カスタマーサービスに直接お問い合わせください。購入証明書としてレシートを保管してください。
For further assistance, you may visit the official SHIMANO store online: SHIMANO Official Store
