1. はじめに
The AVPro Edge AC-EX70-UHD-KIT is a high-performance HDMI extender system designed to transmit 4K UHD content over long distances using a single CAT-5e/6a/7 UTP/STP cable. This kit includes both a Transmitter (TX) and a Receiver (RX) unit, providing a reliable solution for distributing high-value video signals in various environments, from residential setups to commercial installations.
主な特徴:
- 延長伝送: Supports transmission up to 70 meters (230 feet) for 1080P signals and up to 40 meters (131 feet) for 4K UHD signals (4Kx2K 30Hz or 4Kx2K 60Hz YUV 4:2:0).
- 高帯域幅: 10.2 Gbps video bandwidth ensures high-quality signal delivery.
- HDBaseT テクノロジー: Utilizes HDBaseT for efficient and stable signal extension over a single CAT cable.
- Bi-Directional Power (PoH): Either the Transmitter or Receiver can be powered, simplifying installation.
- HDMI 2.0(a/b) & HDCP 2.2/1.4 Compliant: Ensures compatibility with modern video sources and displays.
- HDRサポート： Compatible with High Dynamic Range content.
- Bi-directional IR & RS-232: Allows for control of source equipment from the display location or vice-versa.
- プラグアンドプレイ: 簡単にインストールできるように設計されています。
- Field Firmware Updateable: Allows for future enhancements and bug fixes.
- ESD保護: Built-in circuitry protects against electrostatic discharge up to 7KV.
2. パッケージ内容
下記のすべての品目がパッケージに含まれていることをご確認ください。不足品や破損品がある場合は、すぐに販売店にご連絡ください。
Image: All accessories included with the AVPro Edge AC-EX70-UHD-KIT, including power supply, IR units, RS-232 cables, and mounting ears.
- 1x AC-EX70-UHD-T (Transmitter Unit)
- 1x AC-EX70-UHD-R2 (Receiver Unit)
- 1V電源×48
- 1x IR Tx Unit (IR Emitter)
- 1x IR Rx Unit (IR Receiver)
- 1x 3.5mm Stereo Plug to Male DB9 Cable (for RS-232 to serial port)
- 1x 3.5mm Stereo Plug to Female DB9 Cable (for RS-232 to PC)
- 1x Pair of Mounting Ears
- 取扱説明書（本書）
3. セットアップとインストール
Follow these steps to properly install and connect your AVPro Edge AC-EX70-UHD-KIT.
3.1 Unit Identification
Image: The AVPro Edge AC-EX70-UHD Transmitter (left) and Receiver (right) units, showing their labels and port layouts.
The kit consists of two main units: the 送信機（TX） そして 受信機（RX）. Ensure you correctly identify each unit before making connections.
3.2接続図
The following diagram illustrates a typical connection setup for the AC-EX70-UHD-KIT.
画像: 斜めから view of both the Transmitter and Receiver units, highlighting the HDMI, IR, RS-232, and HDBaseT ports for connection reference.
3.3 インストール手順:
- Prepare CAT Cable: Use a high-quality CAT-5e, CAT-6a, or CAT-7 UTP/STP cable. Ensure the cable is properly terminated following the IEEE-568B standard. The quality of the CAT cable directly impacts transmission distance and stability.
- HDMIソースを送信機（TX）に接続します。 Connect an HDMI cable from your video source (e.g., Blu-ray player, media streamer, PC) to the HDMI IN port on the AC-EX70-UHD-T Transmitter unit.
- Connect HDBaseT Link: Connect one end of the prepared CAT cable to the HDBaseT OUT ポートをトランスミッターに接続し、もう一方の端を HDBaseT IN port on the AC-EX70-UHD-R2 Receiver unit.
- Connect HDMI Display to Receiver (RX): HDMIケーブルを HDMI出力 port on the Receiver unit to your display device (e.g., TV, projector, monitor).
- 電源の接続： Connect the included 48V power supply to either the Transmitter or the Receiver unit. Due to Bi-Directional Power (PoH) capability, only one power supply connection is required for the entire system to function.
- (オプション) IRコントロール:
- To control the source from the display location: Connect the IR Rx unit to the IRイン port on the Receiver. Connect the IR Tx unit to the 赤外線出力 port on the Transmitter and place its emitter eye over the IR sensor of your source device.
- To control the display from the source location: Connect the IR Rx unit to the IRイン port on the Transmitter. Connect the IR Tx unit to the 赤外線出力 port on the Receiver and place its emitter eye over the IR sensor of your display device.
- (Optional) RS-232 Control: Connect the appropriate 3.5mm to DB9 RS-232 cable to the RS-232 port on either the Transmitter or Receiver, and then to your control system or PC for serial communication.
- Secure Units: Use the provided mounting ears to secure the Transmitter and Receiver units in their desired locations, if necessary.
4. 操作手順
Once all connections are made and power is supplied, the AC-EX70-UHD-KIT will begin operation automatically.
4.1 LEDインジケーター
Both the Transmitter and Receiver units feature LED indicators to provide status information:
- 48V LED: Illuminates when the unit is receiving 48V power.
- ステータスLED： Indicates the operational status of the unit. A solid light typically means normal operation.
- リンクLED： Illuminates when a stable HDBaseT link is established between the Transmitter and Receiver.
4.2 Operation Mode Switch
画像: 上 view of the Transmitter and Receiver units, highlighting the 'Operation Mode' switch with 'Program' and 'Normal' settings.
Each unit has an 'Operation Mode' switch with two settings:
- 普通： This is the standard operating mode for everyday use. Ensure the switch is set to 'Normal' for regular video transmission.
- プログラム： This mode is used for firmware updates or specific diagnostic purposes. Do not operate the unit in 'Program' mode during normal video transmission.
4.3 IR and RS-232 Control
The bi-directional IR and RS-232 ports allow for seamless control of connected devices. Refer to the setup section for connection details. Once connected, IR signals from a remote control or RS-232 commands from a control system will be transmitted across the HDBaseT link to control the corresponding device.
5. 仕様
| 特徴 | 仕様 |
|---|---|
| モデル番号 | AC-EX70-UHD-KIT |
| ビデオ帯域幅 | 10.2Gbps |
| HDMI準拠 | HDMI V2.0(a/b) |
| HDCP準拠 | HDCP2.2 / 1.4 |
| HDR サポート | はい |
| UHD Support | 4Kx2K 30Hz or 4Kx2K 60Hz YUV 4:2:0 |
| Transmission Distance (1080P) | 最大70メートル（230フィート） |
| Transmission Distance (4K) | 最大40メートル（131フィート） |
| ケーブル要件 | Single CAT-5e/6a/7 UTP/STP (IEEE-568B) |
| パワーオーバー HDBaseT (PoH) | 双方向 |
| 制御信号 | Bi-directional IR & RS-232 |
| ESD保護 | 最大7KV |
| アイテム重量 | 1.73ポンド（キット合計） |
| 色 | 黒 |
| メーカー | AVプロエッジ |
6。 トラブルシューティング
If you encounter issues with your AC-EX70-UHD-KIT, please refer to the following common problems and solutions:
- ビデオ出力なし:
- Ensure all HDMI cables are securely connected to both the source and display, and to the extender units.
- Verify that the CAT cable is properly terminated (IEEE-568B) and securely connected to both the Transmitter and Receiver.
- Check that the power supply is connected and the 48V LED on at least one unit is illuminated.
- 確認する リンクLED is illuminated, indicating a stable HDBaseT connection. If not, try a different CAT cable or shorten the cable length for testing.
- Test the HDMI source and display directly with a short HDMI cable to rule out issues with those devices.
- Ensure the 'Operation Mode' switch on both units is set to 'Normal'.
- Poor Picture Quality (Flickering, Snow, Distortion):
- This often indicates a problem with the CAT cable. Replace the CAT cable with a higher quality, shorter, or newly terminated one.
- Ensure the cable length does not exceed the maximum specified for your resolution (70m for 1080P, 40m for 4K).
- Check for strong electromagnetic interference (EMI) near the CAT cable run.
- IR or RS-232 Control Not Working:
- Verify that the IR Tx/Rx units or RS-232 cables are correctly connected to the appropriate ports on the extender units and the controlled devices.
- For IR, ensure the IR emitter eye is directly over the IR sensor of the device to be controlled.
- For RS-232, confirm the correct baud rate and other serial communication settings are configured on your control system.
- Units Not Powering On:
- Check the power adapter connection to both the unit and the wall outlet.
- 電源コンセントが機能していることを確認してください。
- If using PoH, ensure the CAT cable is properly connected and functional, as power is transmitted over it.
7. メンテナンス
The AVPro Edge AC-EX70-UHD-KIT is designed for reliable, long-term operation with minimal maintenance.
- クリーニング： 本体の外装を清掃する際は、柔らかく乾いた布をご使用ください。液体洗剤やエアゾール洗剤は使用しないでください。
- ファームウェアの更新： The units are field firmware updateable. Periodically check the AVPro Edge website for available firmware updates to ensure optimal performance and compatibility. Follow the instructions provided with the firmware update package carefully.
- 換気： Ensure the units have adequate ventilation to prevent overheating. Do not block the ventilation holes.
8. 保証とサポート
For detailed warranty information, technical support, and additional resources, please visit the official AVPro Edge website or contact your authorized AVPro Edge dealer. Keep your purchase receipt as proof of purchase for warranty claims.
AVプロエッジ Webサイト： www.avproedge.com
