1. はじめに
The Superior Electronics Simply SUPTLB001 is a universal remote control designed for ease of use and simplicity. It features a self-learning function, allowing it to acquire commands directly from your original remote controls. This remote is capable of controlling up to two different devices, such as a television and a set-top box, making it an ideal solution for consolidating your remote controls. Its design prioritizes large, clearly identifiable buttons for comfortable operation.
2 製品の特徴
- ユニバーサル互換性： Controls a wide range of devices.
- Self-Learning Function: Easily acquires commands from existing remote controls.
- 2つのデバイスの制御: Manages up to two separate electronic devices.
- 大きなボタン: Designed with oversized, clearly marked buttons for enhanced usability.
- 直感的なデザイン: Simple layout for straightforward operation.
- クイックプログラミング: Learning process typically takes less than one minute per button.
3. セットアップ
3.1. バッテリーの取り付け
The Superior Electronics Simply SUPTLB001 remote control requires two (2) AAA batteries (not included) for operation.
- リモコンの背面にある電池ボックスのカバーを見つけます。
- カバーを下方向にスライドするか、ラッチを押して持ち上げて開きます。
- 単 4 電池 2 本を挿入し、プラス (+) とマイナス (-) の端子がコンパートメント内のマークと正しく揃っていることを確認します。
- 電池ボックスのカバーを元に戻し、カチッと音がするまで所定の位置までスライドさせます。
Image: Back of the remote control, indicating the battery compartment.
3.2. Learning Function Programming
The Simply SUPTLB001 remote learns functions directly from your original remote controls. You can program any button on the Simply remote to perform a function from your original remote.
- リモコンを準備する: Place the Simply SUPTLB001 remote and your original remote control on a flat surface, facing each other, with their infrared (IR) emitters aligned and approximately 1-3 cm apart.
- 学習モードに入る: を押し続けます 力 button on the Simply remote for approximately 5 seconds until the red indicator light (usually near the power button) illuminates steadily. This indicates the remote is in learning mode.
- Select Device (A or B): If you are programming for Device A, press the A button. If for Device B, press the B button. The indicator light may flash to confirm selection.
- 学習するボタンを選択: Press the button on the Simply remote that you wish to program (e.g., V+ for Volume Up). The indicator light will start flashing slowly, waiting for a signal.
- 送信信号: Press and hold the corresponding button on your original remote control (e.g., Volume Up) until the indicator light on the Simply remote flashes rapidly three times and then remains steady. This signifies successful learning.
- 他のボタンについても繰り返します。 Repeat steps 4 and 5 for all other buttons you wish to program for the current device.
- 学習モードを終了: Once all desired buttons are programmed, press the 力 button on the Simply remote again to exit learning mode. The indicator light will turn off.
注記： If the indicator light flashes rapidly and then turns off without remaining steady, the learning process for that button may have failed. Ensure the remotes are properly aligned and try again. Some original remotes may require a longer press to transmit the signal effectively.
画像: 正面 view of the Simply SUPTLB001 remote control.
4. 操作手順
After successful programming, you can use your Simply SUPTLB001 remote control to operate your devices.
- デバイスの選択: を押す A button to control the first programmed device or the B button to control the second programmed device. The indicator light may briefly flash to confirm the selected device.
- 電源オン/オフ: を押す 力 選択したデバイスの電源をオンまたはオフにするボタン。
- 音量コントロール: 使用 V+ 音量を上げるボタンと V- 音量を下げる。
- Program/Channel Control: 使用 P+ button to go to the next program/channel and P- to go to the previous program/channel.
- AV 入力: を押す AV button to switch between video input sources on your television.
The functionality of each button depends on how it was programmed during the learning process.
5. メンテナンス
- クリーニング： To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or alcohol, as these can damage the surface.
- バッテリー交換: Replace batteries when the remote's performance degrades or the indicator light does not respond as expected. Always replace both AAA batteries at the same time with new ones.
- ストレージ： リモコンは直射日光や極端な温度を避け、乾燥した場所に保管してください。
6。 トラブルシューティング
| 問題 | 考えられる原因 | 解決 |
|---|---|---|
| リモートが機能しません。 | 電池が切れているか、正しく挿入されていません。 | 正しい極性を確認して、電池を新しい AAA 電池と交換してください。 |
| Learning function fails (indicator light flashes rapidly and turns off). | Remotes not aligned, too far apart, or original remote signal is weak. | Ensure remotes are 1-3 cm apart and IR emitters are aligned. Press and hold the original remote button firmly. Try again. |
| Programmed button does not control the device. | Button was not programmed correctly or device selection is wrong. | Re-program the button following the learning instructions. Ensure you have selected the correct device (A or B) before attempting to control it. |
| リモート範囲が狭いです。 | Low batteries or obstruction between remote and device. | Replace batteries. Ensure a clear line of sight between the remote and the device's IR receiver. |
7. 仕様
| ブランド | 優れた電子機器 |
| モデル名 | 単に |
| モデル番号 | SUPTLB001 |
| 色 | 黒 |
| 接続技術 | Infrared (IR) Learning Function |
| 対応デバイス | Television, other IR-controlled devices |
| サポートされる最大デバイス数 | 2 |
| ボタンの数 | 10 (Power, A, B, AV, V+, V-, P+, P-) |
| 電池のタイプ | 2 x AAA (not rechargeable) |
| 最大範囲 | 10メートル（約33フィート） |
| 寸法（約） | 16.5cm（長さ）x 4.5cm（幅） |
画像: サイド view of the remote control with approximate dimensions.
8. 保証とサポート
This Superior Electronics Simply SUPTLB001 remote control comes with a manufacturer's warranty of 2年 購入日より。
For warranty claims, technical assistance, or further support, please refer to the contact information provided with your purchase documentation or visit the official Superior Electronics webサイトでご確認ください。保証の有効性を確認するため、購入証明書を保管してください。
