Cooler Master MasterBox MB500 ATX ミッドタワー PC ケース 取扱説明書

導入

This manual provides detailed instructions for the Cooler Master MasterBox MB500 ATX Mid-Tower PC case. It covers essential information regarding the case's features, setup procedures, operational guidelines, maintenance tips, and technical specifications. The MasterBox MB500 is designed for optimal thermal performance and aesthetic appeal, featuring a semi-meshed front panel, ventilation holes on the top, and a tempered glass side panel to showcase internal components. Three 120mm RGB fans are pre-installed for effective cooling and customizable lighting.

図1: 正面角度 view of the Cooler Master MasterBox MB500 PC case.

製品終了view

The MasterBox MB500 combines functionality with a sleek design. Key features include:

• Excellent Thermal Performance: Optimized airflow through a semi-meshed front panel and top ventilation.
• Pre-installed RGB LED Fans: Two 120mm RGB fans at the front and one 120mm RGB fan at the rear for effective cooling and lighting.
• RGB照明コントロール: Includes a 1-to-3 splitter cable and a dedicated RGB controller for fan lighting customization. Certified compatible with Asus, Gigabyte, MSI, and ASRock motherboards.
• 強化ガラスサイドパネル： A 4mm thick, edge-to-edge tempered glass panel allows for a clear view 内部コンポーネントの。

図2: 前面の詳細 view highlighting the semi-meshed panel and illuminated RGB fans.

設定

1. 開梱と初期検査

Carefully remove the PC case from its packaging. Inspect the case for any signs of damage during transit. Ensure all accessories, including the RGB controller and fan splitter cables, are present.

2. パネルの取り外し

To access the interior for component installation, the side panels need to be removed. The tempered glass side panel is typically secured with thumb screws at the rear. Once unscrewed, it can be carefully lifted and removed. The opposite side panel is usually a solid steel panel, also secured with thumb screws.

図3: 内部 view of the case with the side panel removed, showing the motherboard tray and internal layout.

3. マザーボードの取り付け

Align your ATX, Micro-ATX, or Mini-ITX motherboard with the standoffs on the motherboard tray. Secure the motherboard using the provided screws. Ensure all necessary cables (24-pin ATX, 8-pin EPS, etc.) can reach their respective ports.

4.電源装置の設置

The power supply unit (PSU) is mounted at the bottom rear of the case. Slide the PSU into its designated bay and secure it with screws from the rear of the case. Route the necessary power cables through the cable management cutouts.

5. Hard Drive and SSD Installation

The MasterBox MB500 provides ample space for storage devices. Hard drives (3.5-inch) and solid-state drives (2.5-inch) can be installed in dedicated drive cages or mounting points within the case. Refer to the specific mounting mechanisms for your drives.

6. グラフィックカード（GPU）のインストール

Insert your graphics card into the appropriate PCIe slot on your motherboard. Secure it with the provided screw or latch mechanism. Connect the necessary PCIe power cables from the PSU to the GPU.

7.ケーブル管理

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to organize cables. This improves airflow and the aesthetic appeal of your build, especially with the tempered glass side panel.

オペレーティング

1. フロントパネルI/O

フロント パネルからは、重要なポートやコントロールに簡単にアクセスできます。

• 電源ボタン: システムのオン/オフを切り替えます。
• USB 2.0ポート： 周辺機器を接続するための 2 つのポート。
• オーディオジャック: ヘッドフォンとマイク用。

2. RGB照明制御

The pre-installed RGB fans can be controlled using the included RGB controller. This allows you to cycle through various lighting effects and colors to match your aesthetic preferences. The 1-to-3 splitter cable ensures synchronized lighting across multiple fans.

図4: 上部前面 view of the case, highlighting the front panel I/O ports and the illuminated RGB fans.

メンテナンス

1. ダストフィルターのクリーニング

The MasterBox MB500 features a semi-meshed front panel and top ventilation, which act as dust filters. Regularly clean these mesh panels to maintain optimal airflow and prevent dust buildup inside the case. The panels can typically be removed for easier cleaning.

2.一般的なクリーニング

Periodically wipe down the exterior of the case with a soft, damp cloth. For the tempered glass side panel, use a glass cleaner and a microfiber cloth to avoid streaks. Ensure the system is powered off and unplugged before performing any cleaning.

トラブルシューティング

1. Front Panel USB Ports Not Functioning

If the front USB 2.0 ports are not working, ensure that the corresponding cables from the front panel are securely connected to the correct headers on your motherboard. Check your motherboard manual for the correct header locations.

2. RGB Fans Not Lighting Up

Verify that the RGB fans are correctly connected to the included RGB controller and that the controller itself is receiving power (e.g., via a SATA power connector from the PSU). Ensure the RGB controller is properly connected to your motherboard's RGB header if you intend to control lighting via software.

仕様

保証とサポート

保証情報およびテクニカルサポートについては、Cooler Masterの公式ウェブサイトをご覧ください。 website or the documentation included with your product packaging. Specific warranty terms and conditions may vary by region and retailer.