マニュアル+

DIRECTV RC73, 4336303112

DIRECTV RC73 IR/RFリモコン ユーザーマニュアル

Model: RC73, 4336303112

製品終了view

The DIRECTV RC73 IR/RF Remote Control is designed for seamless control of your DIRECTV Genie system and other compatible devices. It features both Infrared (IR) and Radio Frequency (RF) technologies, allowing for flexible operation without needing to point the remote directly at the receiver when in RF mode. This remote offers a streamlined layout with essential buttons for navigating your entertainment.

Two DIRECTV RC73 remote controls side-by-side.

Image: Two DIRECTV RC73 remote controls, showcasing their black and white design and button layout.

設定

1. バッテリーの取り付け

Your DIRECTV RC73 remote control requires two AA batteries for operation. These batteries are typically included with your purchase.

  1. リモコンの背面にある電池ボックスのカバーを見つけます。
  2. Slide the cover downwards or press the release tab (if present) and lift the cover off.
  3. 単三電池 2 本を挿入し、プラス (+) とマイナス (-) の端子がコンパートメント内のインジケータと正しく揃っていることを確認します。
  4. 電池ボックスのカバーを元に戻し、カチッと音がするまで所定の位置までスライドさせます。
Two DIRECTV RC73 remotes with included AA batteries and a Genie Remote Guide.

Image: Two DIRECTV RC73 remote controls shown with two AA batteries and a small instruction guide, illustrating the contents of the package.

2. Pairing the Remote to Your DIRECTV Genie Receiver (RF Mode)

To enable RF (Radio Frequency) control, allowing you to operate your receiver without direct line-of-sight, follow these steps:

  1. Point the remote at your DIRECTV receiver.
  2. 同時に押し続けると、 ミュート ボタンと 選択 button on the remote for approximately 5 seconds.
  3. Release the buttons when the green light on the remote blinks twice.
  4. Using the number pad on the remote, enter the code 961.
  5. を押す チャンネルアップ ボタンを1回押します。
  6. を押す 入力 button (located below the number pad).
  7. Observe your TV screen. A message should appear indicating "Applying RF/IR Setup. Please Wait..." followed by "Your Remote is now setup for RF."
  8. を押す 選択 (OK) button on the remote to confirm.

3. Programming the Remote to Your TV (Volume Control)

To control your TV's volume and power with the RC73 remote, you need to program it to your television. This process typically involves selecting your TV's brand from the receiver's menu.

  1. を押す メニュー button on your DIRECTV remote.
  2. Navigate down using the チャンネルダウン button to find and select 設定.
  3. Once in Settings, use the directional arrows to navigate to the right until you find and select リモートコントロール.
  4. From the Remote Control Setup menu, select リモコンのペアリング/プログラム.
  5. 選ぶ Program Audio Device.
  6. You will be prompted to select your TV's brand. Use the keypad or navigate through the list to find your brand (e.g., Samsung). If you don't know the specific model, select "I don't know my model" if available.
  7. Follow the on-screen prompts to test the code. This usually involves pressing the 力 button on the remote to see if your TV turns off.
  8. If the TV turns off, select "It Worked" to confirm the programming. If not, select "Try Next Code" and repeat the test until a working code is found.

操作手順

The DIRECTV RC73 remote control features a user-friendly layout for intuitive navigation and control of your DIRECTV system and connected devices.

Detailed diagram of the DIRECTV RC73 remote control with labels for each button's function.

Image: A detailed diagram of the RC73 remote, illustrating the function of each button for comprehensive control.

キーボタン機能
ボタン関数
ON/OFF (RC73)Turns both DIRECTV Receiver and TV ON or OFF at the same time. (Remote must be programmed for TV; HD DVR still records when off.)
ガイドPress once for On-Screen Guide. Press twice for programming grouped into categories.
メニューAccesses the main menu for settings, recordings, and more.
リストDisplays the LIST of your recorded programs.
EXITExits the current menu and returns to the previous channel view編。
選択Selects the item highlighted on screen.
情報Displays INFORMATION about the program now playing or highlighted in the On-Screen Guide.
VOL（ボリューム）Adjusts the volume of your TV or audio device (if programmed).
CH（チャンネル）チャネルを上下に変更します。
前へReturns to the PREVIOUS channel view編。
RECORD (Red Circle)Records the program now playing or highlighted in the On-Screen Guide. Press twice to record the entire series.
ミュートサウンドをミュートします。
リプレイReplays the previous six seconds.
巻き戻しRewinds at increasing speeds—press up to four times.
再生/一時停止Plays the current program. Press once while the program is playing to PAUSE.
DASH (-)Press for Guide Options while viewing On-Screen Guide. Press for playlist options while viewing playlist. Press to display last 6 digits of receiver ID, satellite signal type (SWiM or Multiswitch) and Internet status.
ADVANCEAdvances 30 seconds. Press and hold to jump ahead to the end of a recorded program.
早送りFast-forwards at increasing speeds—press up to four times.
ENTER (Input)Press for Mini Guide while viewing your program and dismiss with EXIT. ENTER also replaces TV INPUT button: to cycle through the equipment connected to your TV, press and hold for three seconds until LED light at top turns green. Then scroll through inputs by pressing ENTER again.

メンテナンス

バッテリー交換

When the remote's performance degrades or the green light no longer blinks during operation, it's time to replace the batteries. Always use two new AA batteries for optimal performance.

  1. Remove the battery compartment cover as described in the Setup section.
  2. 古い電池を取り外します。
  3. Insert two new AA batteries, observing the correct polarity (+/-).
  4. 電池ボックスのカバーを取り付けます。

クリーニング

To maintain the remote's appearance and functionality, periodically wipe it with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals, as these can damage the remote's surface or internal components.

トラブルシューティング

よくある問題と解決策
問題考えられる原因解決
Remote not responding to receiver.Low or dead batteries; Remote not paired in RF mode; Obstruction between remote and receiver (if in IR mode).Replace batteries. Ensure remote is paired in RF mode (refer to Setup section). Remove any obstructions.
Volume or TV power buttons not working.Remote not programmed to TV.Program the remote to your TV (refer to Setup section, "Programming the Remote to Your TV").
Green light on remote blinks slowly or not at all.バッテリー残量が少なくなっています。すぐに電池を交換してください。
Remote controls receiver but not client device (e.g., Genie Mini).Client device not properly paired or connected.Ensure the client device is correctly connected and powered on. Re-pair the remote with the client device if necessary (consult your Genie Mini's specific instructions).

仕様

保証とサポート

For specific warranty information regarding your DIRECTV RC73 remote control, please refer to the documentation included with your original purchase or visit the official DIRECTV webサイト。保証条件は異なる場合があります。

For technical support, troubleshooting assistance beyond this manual, or to inquire about replacement parts, please contact DIRECTV customer service directly. Contact information can typically be found on your DIRECTV bill, their official website, or through your service provider.

オンラインリソース:

関連文書 - RC73, 4336303112

前view DIRECTV Genie およびユニバーサルリモコンガイド
DIRECTV Genie およびユニバーサル リモコンの機能を理解するための総合ガイドです。さまざまな DIRECTV 受信機およびテレビの詳細なボタンの説明やプログラミング手順も含まれています。
前view DIRECTV ユニバーサルリモコンガイド: 使い方とプログラミング
DIRECTVユニバーサルリモコンの使い方、ボタン機能の理解、そしてビジネスアカウント向けのRC73リモコンの設定方法を学びましょう。設定手順と機能も含まれています。
前view DIRECTV Wireless Genie Mini セットアップおよびアクティベーションガイド
シームレスなビデオ エンターテイメントを実現するために、新しい DIRECTV Wireless Genie Mini を接続、セットアップ、アクティブ化、およびプログラミングするための手順を説明します。
前view DIRECTV Genie 2 サーバーのアクティベーションと機器の返却手順
交換用のDIRECTV Genie 2サーバーをアクティベートし、古い機器を返却して未返却料金を回避するための手順ガイドです。セットアップ、ペアリング、返却手順も記載されています。
前view DIRECTV Genie 2 製品マニュアル - 機能、仕様、および安全情報
DIRECTV Genie 2衛星受信機の包括的な製品マニュアル。ハードウェアの詳細、機能、トラブルシューティング、LEDインジケーター、安全上の注意事項、保証情報などを網羅しています。セットアップと操作ガイドも含まれています。
前view DIRECTV Wireless Genie Mini C41W Installation Guide
Step-by-step guide to installing and connecting the DIRECTV Wireless Genie Mini (Model C41W) to your Genie HD DVR for enhanced home entertainment.