SHARP エアコンリモコン CRMC-A669JBEZ ユーザーマニュアル

1. はじめに

This manual provides detailed instructions for the proper use and maintenance of your SHARP Air Conditioner Remote Control, model CRMC-A669JBEZ. Please read this manual thoroughly before operating the remote control to ensure optimal performance and longevity. This remote is also compatible with systems designed for the CRMCA569JBEZ model.

2.製品オーバーview

The SHARP CRMC-A669JBEZ remote control is designed to provide convenient and precise control over your SHARP Inverter Air Conditioner. It features an LCD display and various buttons for adjusting temperature, operating modes, fan speed, and other functions.

図2.1: フロント view of the SHARP CRMC-A669JBEZ remote control with the lower button cover closed. The display, power button, temperature adjustment buttons, and 'Ion' and 'Display' buttons are visible.

図2.2: フロント view of the SHARP CRMC-A669JBEZ remote control with the lower button cover open, revealing additional function buttons such as Mode, Fan, Swing, Clean, Timer settings, and Set/Cancel.

3. セットアップ

3.1. バッテリーの取り付け

The remote control requires batteries for operation. Batteries are not included with the remote control and must be purchased separately. Typically, two AAA batteries are required, but please verify the battery compartment for specific requirements.

1. リモコンの背面にある電池ボックスのカバーを見つけます。
2. カバーを下方にスライドさせるか、ラッチ（ある場合）を押してコンパートメントを開きます。
3. Insert the new batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment. Incorrect insertion can damage the remote control.
4. 電池ボックスのカバーを、カチッと音がするまで元の位置に戻します。

注記： リモコンを長期間使用しない場合は、液漏れや損傷を防ぐため、電池を取り外してください。

4. 操作手順

Point the remote control directly towards the indoor unit of the air conditioner. Ensure there are no obstructions between the remote control and the air conditioner.

4.1.基本機能

• 電源スイッチ （O|): このボタンを押すとエアコンのオン/オフが切り替わります。
• 温度調整（▲ / ▼): Use the UP arrow (▲) to increase the temperature and the DOWN arrow (▼) to decrease it.
• モードボタン（MODE）： Press this button repeatedly to cycle through the available operating modes: Auto, Cool, Dry, Fan, Heat (if applicable). The current mode will be displayed on the remote's LCD screen.
• Fan Speed Button (FAN): Press this button to adjust the fan speed. Options typically include Auto, Low, Medium, High.
• Swing Button (SWING): Activates or deactivates the automatic vertical airflow swing function. Press again to stop the swing at the desired angle.

4.2. 高度な機能

• Ion Button (Ion): Activates or deactivates the ionizer function, which helps purify the air.
• Display Button (DISPLAY): Toggles the display on the indoor unit, or changes the information shown on the remote's LCD.
• Clean Button (CLEAN): Initiates a self-cleaning function for the indoor unit (if supported by your AC model). Refer to your air conditioner's main manual for details on this function.
• タイマーボタン（⏰ 0.1時間 / ⏰ 1時間 / ⏰ 私 / ⏰ O): These buttons are used to set the ON/OFF timer for the air conditioner.
  • ⏰ 0.1時間 / ⏰ 1h: Adjusts timer in 0.1 or 1-hour increments.
  • ⏰ I (Timer ON): Sets the time for the air conditioner to turn on.
  • ⏰ O (Timer OFF): Sets the time for the air conditioner to turn off.
• Set/Cancel Button (SET/C): Confirms timer settings or cancels a set timer.

5. メンテナンス

5.1. リモコンのクリーニング

To clean the remote control, gently wipe its surface with a soft, dry cloth. Do not use liquid cleaners, abrasive materials, or chemical sprays, as these can damage the remote's finish or internal components.

5.2. バッテリーの交換

When the remote control's display becomes dim or the air conditioner no longer responds reliably, it is time to replace the batteries. Follow the battery installation steps outlined in Section 3.1. Always replace all batteries at the same time with new ones of the same type.

6。 トラブルシューティング

• リモコンが応答しない:
  • 電池が正しい極性で正しく挿入されているかどうかを確認してください。
  • 古い電池を新しいものと交換してください。
  • Ensure there are no obstructions between the remote control and the air conditioner's indoor unit.
  • Verify that the remote control is pointed directly at the air conditioner's receiver.
• Air conditioner not turning on/off:
  • Confirm the air conditioner unit has power.
  • Check if the remote control's display is active and showing the correct settings.
• ディスプレイが暗い、または空白です:
  • Batteries are low or depleted. Replace them.

If problems persist after attempting these troubleshooting steps, consult the main user manual for your SHARP air conditioner or contact customer support.

7. 仕様

8. 保証とサポート

Specific warranty information for this remote control is not provided within this manual. For details regarding warranty coverage, technical support, or service, please refer to the documentation included with your original air conditioner unit or contact the SHARP customer service department. You may also visit the official SHARP webサポート リソースのサイト。