1. はじめに
The Scosche CRTNN01 Backup Camera Retention Harness is designed to facilitate the seamless integration of your vehicle's original backup camera with a new aftermarket car stereo. This adapter allows you to retain the rear view camera functionality when upgrading to a modern Android Auto, CarPlay, or touchscreen car stereo with backup camera capabilities. This manual provides detailed instructions for proper installation and usage.
2.製品オーバーview
The CRTNN01 harness is an OEM quality adapter that simplifies the installation process by connecting your factory wiring to your new stereo. It ensures continuous high-quality rear-view 監視。
Image 2.1: Scosche CRTNN01 Backup Camera Retention Harness. This image displays the main components of the harness, including the vehicle connector, RCA video output, and power/ground wires.
Image 2.2: Scosche CRTNN01 Harness showing the RCA video connector and wiring for power and ground connections.
3. 互換性
The CRTNN01 harness is engineered for compatibility with a wide range of 2010-20 Nissan car and truck cameras. It is specifically designed for vehicles that have an OEM factory backup camera and factory navigation with a 24-pin connector. It works with any RCA Video enabled aftermarket car radio, including Android Auto and CarPlay stereos.
3.1. Compatible Nissan Models (2010-2020)
Image 3.1: Official Fit Guide for Scosche CRTNN01, listing compatible Nissan models and years. This guide specifies that the harness is compatible with vehicles having an OEM factory backup camera and factory navigation with a 24-pin connector.
- Nissan Altima Coupe: 2010-2013
- Nissan Altima Sedan: 2010-UP
- Nissan Sentra: 2010-UP
- Nissan Titan: 2013-2015
- Nissan Cube: 2010 Year
- Nissan NV200: 2019 Year
- Nissan Frontier: 2013-2016
- Nissan Juke: 2015-UP
- Nissan Leaf: 2013-2017
- Nissan Murano: 2015-UP
- Nissan Quest: 2011-UP
- Nissan Rogue: 2011-UP
- Nissan Rogue Select: 2014-2015
- Nissan Sentra: 2010-2017
- Nissan Note: 2014-UP
- Nissan Xterra: 2013-2015
インストールに関する注意事項:
- Only compatible with vehicles that have an OEM factory backup camera.
- Only compatible with vehicles that have factory navigation with a 24-pin connector.
4. パッケージ内容
- Scosche CRTNN01 Backup Camera Retention Harness
5. インストール手順
Before beginning installation, ensure your vehicle is turned off and the negative battery terminal is disconnected to prevent electrical damage.
5.1. 準備
- バッテリーを外します: 車両のバッテリーのマイナス端子を外します。
- 工場出荷時のラジオを削除する: Carefully remove the factory radio from your vehicle's dashboard. Refer to your vehicle's service manual for specific instructions on removing the radio and accessing the wiring.
5.2. 配線接続
The CRTNN01 harness connects to your vehicle's factory wiring and provides an RCA output for your new aftermarket stereo. Some wires from your new stereo's harness may need to be connected to the CRTNN01 harness using splice connectors.
Video 5.1: This video demonstrates the components of a backup camera retention harness and how to connect it. It highlights the RCA video output and the vehicle-specific connector.
- ワイヤーを識別する: Identify the corresponding wires on your aftermarket stereo's wiring harness and the CRTNN01 harness. Common connections include power, ground, reverse signal, and the RCA video input.
- ワイヤーを接続する: Using appropriate splice connectors (not included), connect the wires from the CRTNN01 harness to your aftermarket stereo's harness by matching the colors. Ensure all connections are secure.
Video 5.2: This video illustrates the wiring process for a backup camera retention harness, showing how to connect the various wires to ensure proper functionality.
Video 5.3: This video provides a visual guide to the installation of a backup camera retention wire harness, detailing the steps for connecting it to the vehicle's existing system.
5.3. インストールの完了
- Connect Harness to Vehicle: Plug the vehicle-specific connector of the CRTNN01 harness into the corresponding port in your vehicle's dashboard.
- RCA を接続します: Plug the yellow RCA connector from the CRTNN01 harness into the 'Camera In' or 'Video In' port on your aftermarket stereo.
- セキュアステレオ: Mount your new aftermarket stereo securely into the dashboard.
- バッテリーを再接続します: バッテリーのマイナス端子をつなぎ直します。
6. 操作
Once installed, the backup camera will function as it did with the factory radio. When the vehicle is shifted into reverse, the image from the factory backup camera should automatically display on your aftermarket stereo's screen.
7。 トラブルシューティング
インストール後に問題が発生した場合は、次の点を考慮してください。
- ビデオ表示なし:
- Ensure all wiring connections are secure and correctly matched (power, ground, reverse trigger, RCA video).
- Verify that your aftermarket stereo is set to automatically switch to the camera input when reverse gear is engaged. Check your stereo's settings.
- Confirm the factory camera is receiving power. A multimeter can be used to check voltage on the camera's power wire when in reverse.
- Some aftermarket radios may require a 12V to 6V step-down converter for the factory camera, as factory cameras often operate on 6V while aftermarket units supply 12V. This harness is designed to handle voltage conversion, but verify if your specific vehicle/camera setup has unique requirements.
- Distorted or Inverted Image:
- Check your aftermarket stereo's camera settings for options like PAL/NTSC format or image mirroring. Adjust as necessary.
- 断続的な機能:
- すべての接続部に緩みや腐食がないか点検します。
- Ensure the ground connection is solid and free from paint or rust.
8. 仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | スコシェ |
| モデル番号 | CRTNN01 |
| 材料 | プラスチック |
| コネクタタイプ | RCA |
| 製品寸法（長さ x 幅 x 高さ） | 1.5 x 4.33 x 8.26インチ |
| アイテム重量 | 1.58オンス |
9. 保証とサポート
The Scosche CRTNN01 Backup Camera Retention Harness is backed by Scosche's Limited Lifetime Warranty and Lifetime Tech Support. For any questions or assistance, please contact Scosche customer service.
