導入
This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your ROCCAT Isku+ Force FX RGB Gaming Keyboard. Please read this guide thoroughly to ensure optimal performance and longevity of your device.
画像: トップダウン view of the ROCCAT Isku+ Force FX RGB Gaming Keyboard, showcasing its full layout including macro keys and wrist rest.
設定
1. キーボードの接続
Connect the USB cable from the ROCCAT Isku+ Force FX keyboard to an available USB port on your computer. The keyboard is plug-and-play compatible with Windows operating systems.
2. ソフトウェアのインストール
For full functionality, including RGB lighting customization, macro programming, and pressure-sensitive key configuration, install the ROCCAT Swarm software. The software can be downloaded from the official ROCCAT webサイト。
- Visit the official ROCCAT support webサイト。
- Locate the download section for the Isku+ Force FX keyboard.
- Download and run the latest version of the ROCCAT Swarm software installer.
- 画面の指示に従ってインストールを完了します。
- プロンプトが表示されたらコンピューターを再起動します。
3. 初期設定
After installing ROCCAT Swarm, launch the application. The software will detect your keyboard and allow you to begin customizing settings such as:
- RGBイルミネーション： Adjust colors, effects, and brightness levels.
- マクロキー: Program the M1-M5 and T1-T3 keys with custom commands.
- Pressure-Sensitive Keys: Configure the QWEASD keys for Force FX technology, enabling different input levels based on pressure.
- イージーシフト[+]: Assign a modifier key to double the function of other keys.
画像: 斜め view of the ROCCAT Isku+ Force FX RGB Gaming Keyboard, showing the illuminated keys and the integrated wrist rest.
キーボードの操作
主な特徴view
- RGBキーイルミネーション: The keyboard features enhanced RGB lighting with 6 adjustable brightness levels. Use the ROCCAT Swarm software to personalize your lighting preferences.
- Pressure-Sensitive Key Zone (Force FX): The QWEASD keys are equipped with Force FX technology, allowing them to register different input levels based on pressure, similar to a controller. This feature can be configured in three distinct modes via the software.
- マクロキー: The keyboard includes 36 easy-to-reach macro keys: M1-M5 on the left side, and 3 ROCCAT Thumbster keys (T1-T3) located below the spacebar. These keys can be programmed for complex commands or shortcuts.
- イージーシフト[+]: This technology allows you to assign a secondary function to almost every key on the keyboard, effectively doubling your command options. Activate Easy-Shift[+] via a dedicated key or a programmed macro.
- Talk FX and AlienFX Support: The keyboard supports Talk FX and AlienFX, enabling lighting effects that react to in-game events in compatible games.
- 一体型リストレスト: The extra-large granular wrist rest provides comfort during extended use and features a sweat- and smudge-resistant surface.
Using ROCCAT Swarm Software
The ROCCAT Swarm software is your central hub for customizing the Isku+ Force FX. Within the software, you can:
- 複数のプロを作成および管理fileさまざまなゲームやアプリケーション向けです。
- Record and assign macros to any programmable key.
- Adjust the sensitivity and response curves for the pressure-sensitive QWEASD keys.
- Update keyboard firmware to ensure optimal performance and access new features.
メンテナンス
キーボードの掃除
定期的にクリーニングすると、キーボードの外観と機能性を維持するのに役立ちます。
- 一般的な清掃: 柔らかく糸くずの出ない布で軽く拭き取ってください。ampened with water or a mild cleaning solution. Avoid harsh chemicals, abrasive cleaners, or solvents.
- キーキャップ: For dust and debris between keycaps, use compressed air. You may carefully remove keycaps for deeper cleaning, but consult the ROCCAT support website for specific instructions to avoid damage.
- リストレスト: The sweat- and smudge-resistant surface of the wrist rest can be cleaned with a damp 布。
Caution: Do not immerse the keyboard in water or any liquid. Ensure the keyboard is disconnected from your computer before cleaning.
トラブルシューティング
よくある問題と解決策
- キーボードが応答しない:
- USB ケーブルがキーボードとコンピュータの両方にしっかりと接続されていることを確認します。
- キーボードを別の USB ポートに接続してみてください。
- コンピュータを再起動します。
- Check if the keyboard works on another computer to rule out a system-specific issue.
- RGB 照明が機能しない/正しくない:
- ROCCAT Swarm ソフトウェアがインストールされ、実行されていることを確認します。
- Swarm ソフトウェア内で照明設定を確認します。
- Ensure the keyboard's firmware is up to date via the Swarm software.
- Macro Keys or Pressure-Sensitive Keys Not Functioning:
- Confirm that the ROCCAT Swarm software is installed and the keyboard profile アクティブです。
- Review your macro assignments and Force FX settings within the Swarm software.
- Ensure there are no conflicts with other software or drivers.
- Software Issues (ROCCAT Swarm):
- オペレーティング システムに互換性があることを確認してください (Windows 10/8/7)。
- Try reinstalling the ROCCAT Swarm software.
- Check for software updates within the application or on the ROCCAT webサイト。
これらの手順を実行しても問題が解決しない場合は、保証とサポートのセクションを参照してさらにサポートを受けてください。
仕様
| 特徴 | 詳細 |
|---|---|
| ブランド | ROCCAT |
| モデル番号 | ROC-12-821-AM |
| 接続技術 | USB（コード付き電気） |
| ハードウェアプラットフォーム | ウィンドウズ10/8/7 |
| オペレーティング·システム | WINDOWS 10/8/7 |
| アイテム重量 | 2.2ポンド（約1kg） |
| 製品寸法（長さx幅x高さ） | 19.7 x 9.65 x 1インチ（約50 x 24.5 x 2.5 cm） |
| 色 | 黒 |
| キーボードバックライト | RGB (6 adjustable brightness levels) |
| 特集 | Pressure-sensitive QWEASD keys, 36 Macro Keys, Easy-Shift[+], Talk FX, AlienFX, Integrated Wrist Rest |
| 材料 | Plastic (with Silicone/Rubber wrist rest) |
保証とサポート
保証情報
Your ROCCAT Isku+ Force FX RGB Gaming Keyboard is covered by a manufacturer's warranty. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase for warranty claims.
保証に関する詳細はROCCATの公式サイトをご覧ください。 website or contact your local ROCCAT distributor.
カスタマーサポート
If you encounter issues that cannot be resolved using the troubleshooting guide, or if you require further assistance, please contact ROCCAT customer support.
- オンラインサポート： Visit the ROCCAT support website for FAQs, driver downloads, and contact forms.
- 連絡先： Refer to the ROCCAT website for regional phone numbers or email support options.
When contacting support, please have your product model number (ROC-12-821-AM) and proof of purchase readily available.