1. はじめに
This manual provides instructions for the installation, operation, and maintenance of the Seco-Larm SL-1301-SAQ/R Enforcer LED Strobe Light with Built-In 100dB Programmable Siren. This device is designed to provide visual and audible alerts in various applications, featuring a durable, weather-resistant design and flexible programming options.
An image showing the red Seco-Larm SL-1301-SAQ/R LED Strobe Light. The device features a clear red dome over an array of bright LEDs, mounted on a black base. The base includes product labeling.
2. 重要な安全情報
WARNING: This device is not intended to be used as a visual public mode alarm notification appliance. It is designed for supplementary or specific application signaling.
- インストールと操作の前に、すべての指示を注意深くお読みください。
- インストールやメンテナンスを行う前に、必ず電源を切ってください。
- 設置は、すべての地域の電気コードおよび規制に従って、資格のある担当者が行う必要があります。
- Do not expose the device to excessive moisture or extreme temperatures beyond its specified operating range.
- Verify correct wiring polarity to prevent damage, although the unit features reverse polarity protection.
3. インストール
The SL-1301-SAQ/R is designed for simple 2-wire installation and surface mounting. Its weather-resistant construction allows for both indoor and outdoor use.
3.1 取り付け
- Select a suitable mounting location that provides optimal visibility for the strobe light and audibility for the siren.
- Ensure the mounting surface is stable and can support the device.
- Secure the device to the chosen surface using appropriate fasteners (not included).
3.2配線
The unit operates on 10~24 VAC/VDC. It features a simple 2-wire connection.
- Connect the positive (+) wire from your power source to the RED wire of the strobe light.
- Connect the negative (-) wire from your power source to the BLACK wire of the strobe light.
- 短絡を防ぐために、すべての接続が安全かつ絶縁されていることを確認してください。
- The device includes reverse polarity protection to prevent damage from incorrect wiring, but proper connection is always recommended.
4. 操作
The SL-1301-SAQ/R features multiple flashing options and an adjustable siren.
4.1 Flashing Options
The strobe light offers 6 different flashing patterns. The flashing speed is adjustable from 30 to 260 times per minute. Refer to the specific programming instructions provided with the product packaging for detailed steps on how to select patterns and adjust speed.
4.2 Programmable Siren
A built-in 100dB siren can be programmed for various alert scenarios. Consult the product's specific programming guide for instructions on siren activation and sound pattern selection.
4.3 Backup Battery Functionality
The device supports a backup battery for continuous operation during power interruptions. With a backup battery, the unit can provide continuous lighting for up to 2 hours or strobe flashing for up to 2 hours. Ensure a compatible backup battery is connected as per the product's wiring diagram.
5. メンテナンス
The Seco-Larm SL-1301-SAQ/R is designed for minimal maintenance due to its durable construction and LED technology.
- クリーニング： 定期的にレンズを柔らかくてきれいな布で拭いてください。amp cloth to ensure maximum light output. Avoid abrasive cleaners.
- 検査： 配線と取り付け部分に摩耗、損傷、緩みなどの兆候がないか定期的に点検してください。
- LED寿命: The LEDs have an operating life of over 50,000 hours (approximately 5.7 years), reducing the need for frequent bulb replacement.
6。 トラブルシューティング
If the strobe light or siren is not functioning as expected, consider the following:
- No Light/Siren:
- Check the power supply to ensure it is within the 10~24 VAC/VDC operating range.
- すべての配線接続が安全で、正しく極性化されていることを確認します。
- デバイスに電源が供給されていることを確認してください。
- Incorrect Flashing Pattern/Siren Sound:
- Review the programming instructions to ensure the desired pattern or sound is correctly selected.
- 断続動作:
- Check for loose wiring connections or intermittent power supply.
- Inspect for any physical damage to the unit or wiring.
If issues persist, contact Seco-Larm technical support for further assistance.
7. 仕様
| 特徴 | 仕様 |
|---|---|
| モデル番号 | SL-1301-SAQ/R |
| 営業巻tage | 10〜24 VAC / VDC |
| 消費電流（最大） | 90～550mA |
| 点滅パターン数 | 6 |
| 点滅速度 | Adjustable 30~260 times/min |
| Vertical LED Strips | 10 |
| LEDの総数 | 54 |
| Backup Battery Support | Yes (Steady ON - Up to 2 hours; Strobe flashing - Up to 2 hours) |
| 動作温度 | -4°〜144°F（-20°〜65°C） |
| 電気保護 | 逆極性保護 |
| 内蔵サイレン | Yes - 100dB |
| Operating Life (LEDs) | 50,000時間以上（5.7年以上） |
| IP 定格 | IP55（耐候性） |
| 寸法 | 3-15/16" x 2-29/32" (100 x 74 mm) |
| 色 | 赤 |
| 材料 | ガラス（レンズ） |
| 光源の種類 | 発光ダイオード |
| 取り付けタイプ | 表面実装 |
| アイテム重量 | 8.8オンス |
8. 保証とサポート
For warranty information and technical support, please refer to the documentation included with your purchase or visit the official Seco-Larm webサイトでご確認ください。保証請求に備えて購入証明書を保管してください。
