TRINITY Sliding Undersink Organizer (Model TBFC-22042)

導入

The TRINITY Sliding Undersink Organizer is designed to enhance storage and organization within kitchen, bathroom, or utility cabinets. This unit provides pull-out access to items, maximizing space efficiency, especially in areas with plumbing obstructions. It is suitable for cabinets with an opening of 13 inches or wider and a depth of at least 18 inches.

画像1: メイン view of the TRINITY Sliding Undersink Organizer with two baskets.

安全情報

• 使用前にすべてのコンポーネントがしっかりと固定されていることを確認してください。
• 最大重量容量 50 ポンドを超えないでください。
• 操作中は可動部分に手を近づけないでください。
• この製品は屋内使用のみを目的としています。
• 組み立て中は小さな部品を子供の手の届かないところに保管してください。

パッケージ内容

Verify that all listed components are present before beginning assembly:

• (1) Cabinet mounting template
• (2) Bottom drawers
• (2) Upper drawers
• (4) Cabinet screws
• （4）コネクタ
• （4）スライド

画像2: 分解図 view showing all included components for assembly.

組み立てとセットアップ

Assembly is required for this product. A screwdriver is the primary tool needed. Follow these steps for proper installation:

1. キャビネットを準備する: Ensure the cabinet opening is at least 13 inches wide and 18 inches deep. Clear the installation area.
2. Install Slides: Attach the slide rails to the bottom of the cabinet using the provided cabinet screws. Use the cabinet mounting template to ensure correct positioning. The slides should be parallel and securely fastened.


Image 3: Detail of the slide rails that attach to the cabinet base.

3. バスケットを組み立てる: Connect the bottom and upper drawers using the provided connectors. The upper basket can be positioned on either the left or right side to accommodate plumbing or other obstructions.
4. Mount Organizer to Slides: Carefully align the assembled organizer with the installed slide rails and push it into place until it clicks securely. Test the sliding mechanism to ensure smooth operation.

The organizer can also be installed on 18-inch deep wire shelving racks as a sliding shelf organizer.

Image 4: The organizer shown installed under a sink, demonstrating its use.

手術

To access items, gently pull the organizer forward. The smooth-gliding mechanism allows for full extension, providing visibility and access to all contents. Push the organizer back into the cabinet until it is fully retracted.

• The top basket can be adjusted to either the left or right side during assembly to fit around pipes or other obstacles.
• The unit has a total weight capacity of 50 pounds. Distribute weight evenly between the two baskets.

Image 5: Two organizers demonstrating the reversible top basket placement.

メンテナンス

To maintain the appearance and functionality of your TRINITY Sliding Undersink Organizer:

• 金属表面を柔らかくて乾いた布で拭いてください。amp 必要に応じて布と中性洗剤を使用してください。
• 仕上げにダメージを与える可能性がある研磨剤入りの洗剤や研磨パッドの使用は避けてください。
• すべてのネジと接続部がしっかりと締まっているかどうかを定期的に確認してください。
• If the slides become stiff, a small amount of silicone-based lubricant can be applied to the moving parts.

トラブルシューティング

Problem: Organizer does not slide smoothly.

解決： Check for obstructions in the slide rails. Ensure the rails are clean and free of debris. Verify that the organizer is not overloaded and that weight is distributed evenly. Apply a silicone-based lubricant to the slide mechanisms if necessary.

Problem: Organizer feels unstable or wobbly.

解決： Confirm that all cabinet screws and connectors are tightened securely. Ensure the cabinet surface where the slides are mounted is flat and stable.

Problem: Top basket does not fit due to plumbing.

解決： The top basket is designed to be reversible. During assembly, ensure it is positioned on the side that best accommodates your specific plumbing configuration.

仕様

Image 6: Dimensional diagram of the organizer, including basket and overall unit measurements.

保証とサポート

This TRINITY product is covered by a 1年間のメーカー限定保証. For warranty claims, technical support, or inquiries regarding replacement parts, please contact TRINITY customer service. Refer to the original product packaging or the manufacturer's official web現在の連絡先情報については、サイトをご覧ください。