Poly Voyager 5200 ワイヤレスヘッドセット ユーザーマニュアル

導入

The Poly Voyager 5200 is a single-ear Bluetooth headset designed for mobile professionals who require clear communication on the go. It features advanced noise-canceling technology and an ergonomic design for all-day comfort. This manual provides essential information for setting up, operating, and maintaining your headset.

主な機能は次のとおりです。

• Crystal clear Bluetooth audio quality with triple-mic active Digital Signal Processing (DSP) and wind canceling.
• Up to 7 hours of talk time and a roaming range of up to 98 feet (30 meters).
• Ergonomic design rigorously tested for stability and comfort on a wide range of ear shapes.
• Voice controls for answering/ignoring calls and activating virtual assistants like Siri, Google Assistant, or Cortana.
• Moisture-resistant P2i coating for durability.

箱の中身

パッケージの内容をチェックして、すべてのアイテムが揃っていることを確認してください。

• Poly Voyager 5200 Mono Bluetooth Headset
• Micro USB to USB-A Charging Cable
• イヤーチップ（小、中、大）

製品終了view

Familiarize yourself with the components of your Poly Voyager 5200 headset:

画像: 正面 view of the Poly Voyager 5200 Wireless Headset, showcasin人間工学に基づいたデザインとコントロールボタンを備えています。

画像: サイド view of the Poly Voyager 5200 Wireless Headset, highlighting its over-ear wearing style and comfortable fit.

ヘッドセットのコンポーネント:

• 電源スイッチ： Located on the main body, used to turn the headset on or off.
• コールボタン： Typically on the side, used to answer, end, or reject calls.
• 音量ボタン: Usually two distinct buttons for increasingとde​​creasing audio volume.
• 消音ボタン： A dedicated button to mute or unmute the microphone during calls.
• マイクブーム: Extends from the main body to position the microphones closer to your mouth for clear voice pickup.
• 充電ポート: Micro USB port for connecting the charging cable.
• イヤーチップ: Replaceable silicone tip that fits into your ear canal for comfort and sound delivery.

設定

1. ヘッドセットの充電

Before first use, fully charge your headset. Connect the micro USB end of the charging cable to the headset's charging port and the USB-A end to a USB wall charger or a computer's USB port. The charging indicator light will show the charging status. A full charge takes approximately 1.5 hours and provides up to 7 hours of talk time.

2. Pairing with a Mobile Device

To connect your headset to your mobile phone or tablet via Bluetooth:

1. Turn on your headset by sliding the power switch.
2. モバイルデバイスで Bluetooth を有効にします。
3. Put the headset into pairing mode. This is usually done by pressing and holding the Call button until the indicator light flashes red and blue, or a voice prompt says "pairing."
4. On your mobile device, search for new Bluetooth devices. Select "Poly Voyager 5200" from the list of available devices.
5. If prompted, enter the passcode "0000" (four zeros).
6. Once paired, the headset indicator light will stop flashing and a voice prompt will confirm the connection.

3. Fitting the Headset

The Voyager 5200 comes with small, medium, and large ear tips to ensure a comfortable and secure fit. Experiment with different sizes to find the one that best suits your ear. The headset is designed to be worn over the ear, with the microphone boom positioned towards your mouth for optimal voice clarity.

操作手順

通話管理

• 通話の応答/終了: 通話ボタンを1回押します。
• 通話を拒否: 通話ボタンを2秒間押し続けます。
• ミュート/ミュート解除: 通話中にミュート ボタンを押します。
• Transfer Audio: During a call, press and hold the Call button for 2 seconds to transfer audio between your phone and headset.

Voice Controls and Assistant

The headset supports voice commands and integration with your phone's virtual assistant:

• When an incoming call rings, you can say "Answer" or "Ignore" to manage the call hands-free.
• Press the dedicated voice control button to activate Siri, Google Assistant, or Cortana on your connected smartphone.

オーディオストリーミング

The Voyager 5200 can stream audio from your mobile device, including music, podcasts, and GPS directions. Use your phone's media controls to play, pause, or skip tracks.

マルチポイント接続

Your headset can connect to two mobile devices simultaneously. This allows you to seamlessly switch between calls or audio from different devices without re-pairing.

メンテナンス

クリーニング

Regularly clean your headset to ensure optimal performance and hygiene. Use a soft, dry cloth to wipe down the headset. For the ear tip, you may gently remove it and clean with a damp cloth and mild soap, ensuring it is completely dry before reattaching.

ストレージ

When not in use, store your headset in a cool, dry place away from extreme temperatures and direct sunlight. Avoid storing it with sharp objects that could scratch or damage the device.

トラブルシューティング

音が出ない、または音質が悪い

• ヘッドセットが充電され、電源がオンになっていることを確認します。
• Check that the headset is properly paired and connected to your device.
• ヘッドセットと接続されたデバイスの両方の音量を上げます。
• Move closer to your device; the maximum range is 98 feet (30 meters).
• Ensure there are no obstructions or strong interference sources (e.g., Wi-Fi routers, other Bluetooth devices) between the headset and your device.
• ヘッドセットをデバイスと再度ペアリングしてみてください。

Cannot Pair Headset

• ヘッドセットがペアリング モードになっていることを確認します (インジケーター ライトが赤と青で点滅します)。
• Turn off and then on your mobile device's Bluetooth.
• Delete the headset from your device's Bluetooth list and try pairing again.
• Ensure the headset is not already connected to another device (due to multi-point feature).

音声コマンドが応答しない

• Ensure your phone's voice assistant is enabled and configured correctly.
• マイクに向かってはっきりと直接話してください。
• Check for firmware updates for your headset via the Poly app (if available).

仕様

製品ビデオ

保証とサポート

保証情報

The Poly Voyager 5200 Wireless Headset comes with a 1-year limited warranty in the U.S. For global warranty information and details, please visit the official Poly webサイト ポリ.com.

カスタマーサポート

For further assistance, technical support, or to access additional resources such as FAQs and software downloads, please visit the Poly support webサイトをご覧いただくか、製品パッケージに記載されている連絡先情報を参照してください。